High-performance acetone gas sensor based on ferrite–DyFeO3
Source abstract
Abstract
Rare earth ferrite–DyFeO3 powders with variable particle sizes and surface areas were prepared by the sol–gel method with annealing at 600 °C, 700 °C, 800 °C, and 900 °C to research the acetone sensing properties. The DyFeO3 powders annealed at 800 °C showed a good response to acetone and can be used as an acetone sensor due to its excellent microstructure. Moreover, the best response of 3.81 for the DyFeO3 sensor was observed at the operating temperature of 190 °C in 2 ppm acetone atmosphere. The response and recovery time were 42 s and 44 s, respectively, indicating that the DyFeO3 material annealed at 800 °C can be used as a reusable acetone sensor. In addition, the DyFeO3 material has excellent selectivity to acetone compared with 2 ppm other gases (ammonia, methanol, formaldehyde, ethanol and acetylacetone), suggesting that the application of DyFeO3 material in acetone sensors is promising.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Analytical Chemistry and Sensors · Advanced Chemical Sensor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Liu F, Guan Y, Sun R, Liang X, Sun P, Liu F, Lu G (2015) Mixed potential type acetone sensor using stabilized zirconia and M3V2O8 (M: Zn, Co and Ni) sensing electrode. Sens Actuators B 221:673–68010.1016/j.snb.2015.07.023 ↗
2. Makisimovich N, Vorottyntsev V, Nilitina N, Kaskevich O, Karabum P, Martynenko F (1996) Adsorption semiconductor sensor for diabetic ketoacidosis diagnosis. Sens Actuators B 36:419–42110.1016/S0925-4005(97)80107-4 ↗
3. Likhodii SS, Musa K, Cunnane SC (2002) Breath acetone as a measure of systemic ketosis assessed in a rat model of the ketogenic diet. Clin Chem 48:115–120
4. Wang CC, Weng YC, Chou TC (2007) Acetone sensor using lead foil as working electrode. Sens Actuators B 122:591–59510.1016/j.snb.2006.07.003 ↗
5. Cao Y, Qin HW, Chen YP, Hu JF (2019) Acetone sensing mechanism of PdO-modified hexagonal WO3 (001) surface: DFT calculations. Appl Surf Sci 495:14353210.1016/j.apsusc.2019.143532 ↗
6. Kulkarni P, Chellam S, Mittlefehldt DW (2007) Microwave-assisted extraction of rare earth elements from petroleum refining catalysts and ambient fine aerosols prior to inductively coupled plasma-mass spectrometry. Anal Chim Acta 581:247–25910.1016/j.aca.2006.08.035 ↗
7. Houssay E, Rouault A, Thomas O, Madar R, Senateur JP (1989) Metallurgical reinvestigation of rare earth silicides. Appl Surf Sci 38:156–16110.1016/0169-4332(89)90531-X ↗
8. Azimi G, Dhiman R, Kwon HM, Paxson AT, Varanasi KK (2013) Hydrophobicity of rare-earth oxide. Nat Mater 12:315–32010.1038/nmat3545 ↗
9. Lahoz F, Martin IR, Rodriguez-Mendoza UR, Iparraguirre I, Azkargorta J, Mendioroz A, Balda R, Fernandez J, Lavin V (2005) Rare earths in nanocrystalline glass–ceramics. Opt Mater 27:1762–177010.1016/j.optmat.2004.11.047 ↗
10. Buschow KHJ (1991) Permanent magnet materials based on tetragonal rare earth compounds of the type RFe12−xMx. J Magn Magn Mater 100:79–8910.1016/0304-8853(91)90813-P ↗
11. Adachi GY, Imanaka N (1997) Rare earth contribution in solid state electrolytes, especially in the chemical sensor field. J Alloy Compd 250:492–50010.1016/S0925-8388(96)02628-X ↗
12. Yang K, Ma JZ, Qiao XK, Cui YW, Jia LC, Wang HQ (2020) Hierarchical porous LaFeO3 nanostructure for efficient trace detection of formaldehyde. Sens Actuators B 313:12802210.1016/j.snb.2020.128022 ↗
13. Han T, Ma SY, Xu XL, Xu XH, Pei ST, Tie Y, Cao PF, Liu WW, Wang BJ, Zhang R, Zhang JL (2020) Rough SmFeO3 nanofibers as an optimization ethylene glycol gas sensor prepared by electrospinning. Mater Lett 268:12757510.1016/j.matlet.2020.127575 ↗
14. Chen YP, Qin HW, Wang XF, Li L, Hu JF (2016) Acetone sensing properties and mechanism of nano-LaFeO3 thick-films. Sens Actuators B 235:56–6610.1016/j.snb.2016.05.059 ↗
15. Wang BQ, Yu Q, Zhang SF, Wang TS, Sun P, Chuai XH, Lu GY (2018) Gas sensing with yolk-shell LaFeO3 microspheres prepared by facile hydrothermal synthesis. Sens Actuators B 258:1215–122210.1016/j.snb.2017.12.018 ↗
16. Ma L, Ma SY, Shen XF, Wang TT, Jiang XH, Chen Q, Qiang Z, Yang HM, Chen H (2018) PrFeO3 hollow nanofibers as a highly efficient gas sensor for acetone detection. Sens Actuators B 255:2546–255410.1016/j.snb.2017.09.060 ↗
17. Wu ZL, Zhang R, Zhao M, Fang SM, Han ZX, Hu JF, Wang KY (2012) Effect of Pd doping on the acetone-sensing properties of NdFeO3. Int J Miner Metall Mater 19:141–14510.1007/s12613-012-0529-y ↗
18. Tong YX, Zhang Y, Jiang B, He JP, Zheng XJ, Liang QC (2017) Effect of Lanthanides on Acetone Sensing Properties of LnFeO3 Nanofibers (Ln = La, Nd, and Sm). IEEE Sens J 17:2404–241010.1109/JSEN.2017.2670548 ↗
19. Niu XS, Du WM, Du WP (2004) Preparation, characterization and gas-sensing properties of rare earth mixed oxides. Sens Actuators B 99:399–40410.1016/j.snb.2003.12.006 ↗
20. Niu XS, Du WM, Du WP, Jiang K (2004) Studies on Synthesis and Sensing Characteristics of Nanocrystalline HoFeO3. Chin J Chem Phys 17:79–82
21. Liu XH, Qin XX, Ji HM, Wang MJ (2019) An enhanced butanone sensing performance of Er0.7Yb0.3FeO3 material with the proper electronic structure. J Alloy Compd 772:263–27110.1016/j.jallcom.2018.09.073 ↗
22. Zhang PP, Qin HW, Lv W, Zhang H, Hu JF (2017) Gas sensors based on ytterbium ferrites nanocrystalline powders for detecting acetone with low concentrations. Sens Actuators B 246:9–1910.1016/j.snb.2017.01.096 ↗
23. Yang F, Guo LC, Lia P, Zhao XZ, Suic YL, Guo ZM, Gao XX (2017) Boundary structure modification and magnetic properties of Nd–Fe–B sintered magnets by co-doping with Dy2O3/S powders. J Magn Magn Mater 429:117–12310.1016/j.jmmm.2017.01.029 ↗
24. Suganya Josephine GA, Sivasamy A (2014) Nanocrystalline ZnO doped Dy2O3 a highly active visible photocatalyst: the role of characteristic f orbital’s of lanthanides for visible photoactivity. Appl Catal B 150–151:288–29710.1016/j.apcatb.2013.11.004 ↗
25. Chandrasekhar M, Sunitha DV, Dhananjaya N, Nagabhushana H, Sharma SC, Nagabhushana BM, Shivakumara C, Chakradhar RPS (2012) Structural and phase dependent thermo and photoluminescent properties of Dy(OH)3 and Dy2O3 nanorods. Mater Res Bull 47:2085–209410.1016/j.materresbull.2012.03.043 ↗
26. Dong X, Cheng XL, Zhang XF, Sui LL, Xu YM, Gao S, Zhao H, Huo LH (2018) A novel coral-shaped Dy2O3 gas sensor for high sensitivity NH3 detection at room temperature. Sens Actuators B Chem 255:1308–131510.1016/j.snb.2017.08.117 ↗
27. Niu XS, Du WM, Du WP, Jiang K (2005) Preparation and H2S-sensing properties of DyFeO3 nanometer materials. Rare Metal Mat Eng 34:124–127
28. Chaudhuri SP, Patra SK (2000) Electron paramagnetic resonance and Mössbauer spectroscopy of transition metal ion doped mullite. J Mater Sci 35:4735–4741. https://doi.org/10.1023/A:100486330946410.1023/A:1004863309464 ↗
29. Ishikawa K, Yoshikawa K, Okada N (1988) Size effect on the ferroelectric phase transition in ultrafine particles. Phys Rev B 37:585210.1103/PhysRevB.37.5852 ↗
30. Ye YC, Yang H, Wang XX, Feng WJ (2018) Photocatalytic, Fenton and photo-Fenton degradation of RhB over Z-scheme g-C3N4/LaFeO3 heterojunction photocatalysts. Mater Sci Semicond Process 82:14–2410.1016/j.mssp.2018.03.033 ↗
31. Zhou J, Zhang JW, Rehman AU, Kan K, Li L, Shi KY (2017) Synthesis, characterization, and ammonia gas sensing properties of Co3O4@CuO nanochains. J Mater Sci 52:3757–3770. https://doi.org/10.1007/s10853-016-0561-910.1007/s10853-016-0561-9 ↗
32. Sun LH, Hu JF, Qin HW, Zhao M, Fan K (2011) Influences of Ca Doping and Oxygen Vacancy upon Adsorption of CO on the LaFeO3 (010) Surface: A First-Principles Study. J Phys Chem C 115:5593–559810.1021/jp107038z ↗
33. Wang XF, Chen YP, Qin HW, Li L, Shi CM, Liu L, Hu JF (2015) CO2 sensing of La0.875Ca0.125FeO3 in wet vapor: a comparison of experimental results and first-principles calculations. Phys Chem Chem Phys 17:13733–1374210.1039/C5CP00096C ↗
34. Lee AP, Reedy BJ (1999) Temperature modulation in semiconductor gas sensing. Sens Actuators B 60:35–4210.1016/S0925-4005(99)00241-5 ↗
35. Mizsei J (1995) How can sensitive and selective semiconductor gas sensors be made? Sens. Actuators B 23:173–17610.1016/0925-4005(94)01269-N ↗
36. Li YJ, Wang SM, Hao P, Tian J, Cui HZ, Wang XZ (2018) Soft-templated formation of double-shelled ZnO hollow microspheres for acetone gas sensing at low concentration/near room temperature. Sens Actuators B 273:751–75910.1016/j.snb.2018.06.110 ↗
37. Righettoni M, Tricoli A, Pratsinis SE (2010) Si: WO3 sensors for highly selective detection of acetone for easy diagnosis of diabetes by breath analysis. Anal Chem 82:3581–358710.1021/ac902695n ↗
38. Liu X, Hu JF, Cheng B, Qin HW, Jiang MH (2008) Acetone gas sensing properties of SmFe1−xMgxO3 perovskite oxides. Sens Actuators B 134:483–48710.1016/j.snb.2008.05.024 ↗
39. He JQ, Yin J, Liu D, Zhang LX, Cai FS, Bie LJ (2013) Enhanced acetone gas-sensing performance of La2O3-doped flowerlike ZnO structure composed of nanorods. Sens Actuators B 182:170–17510.1016/j.snb.2013.02.085 ↗
40. Chang CR, Huang ZQ, Li J (2015) Hydrogenation of molecular oxygen to hydroperoxyl: an alternative pathway for O2 activation on nanogold catalysts. Nano Res 8:3737–374810.1007/s12274-015-0873-0 ↗
41. Yang WY, Shen HL, Min HH, Ge JW (2020) Enhanced acetone sensing performance in black TiO2 by Ag modification. J Mater Sci 55:10399–10411. https://doi.org/10.1007/s10853-020-04703-610.1007/s10853-020-04703-6 ↗