journal article·2018-08

Adsorption of methyl violet using pH- and temperature-sensitive cellulose filament/poly(NIPAM-co-AAc) hybrid hydrogels

Min Zhang, Yuan Li, Qili Yang, Liulian Huang, Lihui Chen, Huining Xiao

Journal of Materials Science· Volume 53· Issue 16
Publisher page

Abstract

Cellulose filament (CF) was modified via hybridization with poly (N-isopropylacrylamide-co-acrylic acid), which was prepared by free radical copolymerization of two monomers: N-isopropylacrylamide (NIPAM) as the thermosensitive component and acrylic acid (AAc) as the pH sensitive component. The copolymer was characterized with scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and colloid tritation measurements. SEM and AFM images indicated the formation of semi-interpenetrating network (S-IPN) structure between cellulose filaments and poly(NIPAM-co-AAc). FTIR spectra displayed the characteristic peaks for CF and poly(NIPAM-co-AAc). TGA suggested that there was no degradation occurred for cellulose, and physical crosslinks between cellulose and poly(NIPAM-co-AAc) might be formed in the S-IPN. The amount of negative charges of CF/poly(NIPAM-co-AAc) was about 14.6 times that of neat CF. The adsorption of MV on CF/poly(NIPAM-co-AAc) reflected pH-dependence and pH 7.0 was the optimum pH value for MV adsorption. Adsorption isotherms at 293, 313 and 333 K could be described by Langmuir, Freundlich, Temkin and Sips models, amongst which Langmuir model had the best R2 values. At 293 K, the maximum adsorption capacity of S-IPN hybrids was 226.02 mg/g, which was higher than that of neat CF (64.83 mg/g). The negative values of ΔG0 and positive values ΔH0 calculated through thermodynamics equation indicated that the adsorption towards MV was a spontaneous and endothermic process. The adsorption kinetics followed a pseudo-second-order model and exhibited a three-stage intra-particle diffusion mode. The S-IPN hydrogels showed an increased desorption rate and an accelerated desorption process when temperature was increased. Furthermore, the S-IPN hydrogels showed that the desorption of MV was promoted by increasing temperature. Finally, the regenerated hydrogels reserved an adsorption capacity superior to that of the regenerated CF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications · Advanced Cellulose Research Studies · Adsorption and biosorption for pollutant removal

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Hameed BH, El-Khaiary MI (2008) Batch removal of malachite green from aqueous solutions by adsorption on oil palm trunk fibre: equilibrium isotherms and kinetic studies. J Hazard Mater 154:237–24410.1016/j.jhazmat.2007.10.017 ↗
2. Thangamani KS, Sathishkumar M, Sameena Y, Vennilamani N, Kadirvelu K, Pattabhi S, Yun SE (2007) Utilization of modified silk cotton hull waste as an adsorbent for the removal of textile dye (reactive blue MR) from aqueous solution. Bioresour Technol 98:1265–126910.1016/j.biortech.2006.05.010 ↗
3. Moussavi G, Khosravi R (2011) The removal of cationic dyes from aqueous solutions by adsorption onto pistachio hull waste. Chem Eng Res Des 89:2182–218910.1016/j.cherd.2010.11.024 ↗
4. Kaşgöz H, Durmus A (2010) Dye removal by a novel hydrogel-clay nanocomposite with enhanced swelling properties. Polym Adv Technol 19:838–84510.1002/pat.1045 ↗
5. Gupta VK (2009) Suhas, Application of low-cost adsorbents for dye removal—a review. J Environ Manage 90:2313–234210.1016/j.jenvman.2008.11.017 ↗
6. Jiang F, Dinh DM, Hsieh YL (2017) Adsorption and desorption of cationic malachite green dye on cellulose nanofibril aerogels. Carbohyd Polym 173:286–29410.1016/j.carbpol.2017.05.097 ↗
7. Garg VK, Kumar R, Gupta R (2004) Removal of malachite green dye from aqueous solution by adsorption using agro-industry waste: a case study of Prosopis cineraria. Dyes Pigm 62:1–1010.1016/j.dyepig.2003.10.016 ↗
8. Kang H, Liu R, Huang Y (2015) Graft modification of cellulose: methods, properties and applications. Polymer 70:A1–A1610.1016/j.polymer.2015.05.041 ↗
9. Yang Z, Li H, Li A, Cheng T, Haijiang R (2013) Effect of hydrolysis degree of hydrolyzed polyacrylamide grafted; carboxymethyl cellulose on dye removal efficiency. Cellulose 20:2605–261410.1007/s10570-013-9987-2 ↗
10. Zhang M, Ding C, Huang L, Chen L, Yang H (2014) Interactions of collagen and cellulose in their blends with 1-ethyl-3-methylimidazolium acetate as solvent. Cellulose 21:3311–332210.1007/s10570-014-0372-6 ↗
11. O’Connell DW, Birkinshaw C, O’Dwyer TF (2008) Heavy metal adsorbents prepared from the modification of cellulose: a review. Bioresour Technol 99:6709–672410.1016/j.biortech.2008.01.036 ↗
12. Biswas A, Kim S, Selling GW, Cheng HN (2014) Conversion of agricultural residues to carboxymethylcellulose and carboxymethylcellulose acetate. Ind Crops Prod 60:259–26510.1016/j.indcrop.2014.06.004 ↗
13. Wang L, Li J (2013) Adsorption of C.I. Reactive Red 228 dye from aqueous solution by modified cellulose from flax shive: kinetics, equilibrium, and thermodynamics. Ind Crops Prod 42:153–15810.1016/j.indcrop.2012.05.031 ↗
14. Roman MJ, Decker EA, Goddard JM (2014) Fourier transform infrared studies on the dissociation behavior of metal-chelating polyelectrolyte brushes. ACS Appl Mater Interfaces 6:5383–538710.1021/am501212g ↗
15. Bastakoti BP, Guragain S, Nakashima K, Yamauchi Y (2015) Stimuli-induced core-corona inversion of Micelle of poly(acrylic acid)-block-poly(N-isopropylacrylamide) and its application in drug delivery. Macromol Chem Phys 216:287–29110.1002/macp.201400440 ↗
16. Wang F, Pan Y, Cai P, Guo T, Xiao H (2017) Single and binary adsorption of heavy metal ions from aqueous solutions using sugarcane cellulose-based adsorbent. Bioresour Technol 241:482–49010.1016/j.biortech.2017.05.162 ↗
17. Wang Y, Wang W, Wang A (2013) Efficient adsorption of methylene blue on an alginate-based nanocomposite hydrogel enhanced by organo-illite/smectite clay. Chem Eng J 228:132–13910.1016/j.cej.2013.04.090 ↗
18. Dragan ES, Loghin DFA (2013) Enhanced sorption of methylene blue from aqueous solutions by semi-IPN composite cryogels with anionically modified potato starch entrapped in PAAm matrix. Chem Eng J 234:211–22210.1016/j.cej.2013.08.081 ↗
19. Karim Z, Mathew AP, Grahn M, Mouzon J, Oksman K (2014) Nanoporous membranes with cellulose nanocrystals as functional entity in chitosan: removal of dyes from water. Carbohydr Polym 112:668–67610.1016/j.carbpol.2014.06.048 ↗
20. Zhang M, Ding C, Chen L, Huang L, Yang H (2014) Tannin-immobilized collagen/cellulose bead as an effective adsorbent for Cu(II) in aqueous solutions. J Biobased Mater Bioenergy 8:610–61710.1166/jbmb.2014.1480 ↗
21. Fan L, Luo C, Sun M, Li X, Lu F, Qiu H (2012) Preparation of novel magnetic chitosan/graphene oxide composite as effective adsorbents toward methylene blue. Bioresour Technol 114:703–70610.1016/j.biortech.2012.02.067 ↗
22. Plunkett KN, Zhu X, Moore JS, Leckband DE (2006) PNIPAM chain collapse depends on the molecular weight and grafting density. Langmuir 22:4259–426610.1021/la0531502 ↗
23. Deng S, Ting YP (2005) Fungal biomass with grafted poly(acrylic acid) for enhancement of Cu(II) and Cd(II) biosorption. Langmuir 21:5940–594810.1021/la047349a ↗
24. Huang S-H, Chen D-H (2009) Rapid removal of heavy metal cations and anions from aqueous solutions by an amino-functionalized magnetic nano-adsorbent. J Hazard Mater 163:174–17910.1016/j.jhazmat.2008.06.075 ↗
25. Pal A, Giri A, Bandyopadhyay A (2016) Influence of hydrodynamic size and zeta potential of a novel polyelectrolyte poly (acrylic acid) grafted guar gum for adsorption of Pb(II) from acidic waste water. J Environ Chem Eng 4:1731–174210.1016/j.jece.2016.02.034 ↗
26. Tian Y, Wu M, Liu R, Wang D, Lin X, Liu W, Ma L, Li Y, Huang Y (2011) Modified native cellulose fibers—a novel efficient adsorbent for both fluoride and arsenic. J Hazard Mater 185:93–10010.1016/j.jhazmat.2010.09.001 ↗
27. Sips R (2004) On the structure of a catalyst surface. J Chem Phys 16:1024–1026
28. Hokkanen S, Repo E, Song L, Sillanpää M (2015) Removal of arsenic(V) by magnetic nanoparticle activated microfibrillated cellulose. Chem Eng J 260:886–89410.1016/j.cej.2014.08.093 ↗
29. Pourjavadi A, Barzegar S, Mahdavinia GR (2006) MBA-crosslinked Na-Alg/CMC as a smart full-polysaccharide superabsorbent hydrogels. Carbohydr Polym 66:386–39510.1016/j.carbpol.2006.03.013 ↗
30. Ekici S (2011) Intelligent poly(N-isopropylacrylamide)-carboxymethyl cellulose full interpenetrating polymeric networks for protein adsorption studies. J Mater Sci 46:2843–2850. https://doi.org/10.1007/s10853-010-5158-010.1007/s10853-010-5158-0 ↗
31. Lu P, Xiao H, Zhang W, Gong G (2014) Reactive coating of soybean oil-based polymer on nanofibrillated cellulose film for water vapor barrier packaging. Carbohydr Polym 111:524–52910.1016/j.carbpol.2014.04.071 ↗
32. Sun R, Hughes S (1998) Fractional extraction and physico-chemical characterization of hemicelluloses and cellulose from sugar beet pulp. Carbohydr Polym 36:293–29910.1016/S0144-8617(97)00255-5 ↗
33. Li G, Yu N, Gao Y, Tao Q, Liu X (2016) Polymeric hollow spheres assembled from ALG-g-PNIPAM and β-cyclodextrin for controlled drug release. Int J Biol Macromol 82:381–38610.1016/j.ijbiomac.2015.11.010 ↗
34. Pan Y, Cai P, Farmahini-Farahani M, Li Y, Hou X, Xiao H (2016) Amino-functionalized alkaline clay with cationic star-shaped polymer as adsorbents for removal of Cr(VI) in aqueous solution. Appl Surf Sci 385:333–34010.1016/j.apsusc.2016.05.112 ↗
35. Royer B, Cardoso NF, Lima EC, Vaghetti JCP, Simon NM, Calvete T, Veses RC (2009) Applications of Brazilian pine-fruit shell in natural and carbonized forms as adsorbents to removal of methylene blue from aqueous solutions—kinetic and equilibrium study. J Hazard Mater 164:1213–122210.1016/j.jhazmat.2008.09.028 ↗
36. Yao Y, He B, Xu F, Chen X (2011) Equilibrium and kinetic studies of methyl orange adsorption on multiwalled carbon nanotubes. Chem Eng J 170:82–8910.1016/j.cej.2011.03.031 ↗
37. Zhou C, Wu Q, Lei T, Negulescu II (2014) Adsorption kinetic and equilibrium studies for methylene blue dye by partially hydrolyzed polyacrylamide/cellulose nanocrystal nanocomposite hydrogels. Chem Eng J 251:17–2410.1016/j.cej.2014.04.034 ↗
38. Repo E, Warchol JK, Kurniawan TA, Sillanpää MET (2010) Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: kinetic and equilibrium modeling. Chem Eng J 161:73–8210.1016/j.cej.2010.04.030 ↗
39. Ji W, Wang L, Qian H, Yao W (2014) Quantitative analysis of amoxicillin residues in foods by surface-enhanced raman spectroscopy. Spectrosc Lett 47:451–45710.1080/00387010.2013.807843 ↗
40. Piccin JS, Dotto GL, Pinto LAA (2011) Adsorption isotherms and thermochemical data of FD&C Red noã 40 binding by Chitosan. Braz J Chem Eng 28:295–30410.1590/S0104-66322011000200014 ↗
41. Garnier C, Finqueneisel G, Zimny T, Pokryszka Z, Lafortune S, Défossez PDC, Gaucher EC (2011) Selection of coals of different maturities for CO2 storage by modelling of CH4 and CO2 adsorption isotherms. Int J Coal Geol 87:80–8610.1016/j.coal.2011.05.001 ↗
42. Kara M, Yuzer H, Sabah E, Celik MS (2003) Adsorption of cobalt from aqueous solutions onto sepiolite. Water Res 37:224–23210.1016/S0043-1354(02)00265-8 ↗
43. Sparks DL (1989) Kinetics of soil chemical processes. Environ Soil Chem 62:149
44. Ho YS, Mckay G (1999) Pseudo-second order model for sorption processes. Process Biochem 34:451–46510.1016/S0032-9592(98)00112-5 ↗
45. Pang Y, Zeng G, Tang L, Zhang Y, Liu Y, Lei X, Li Z, Zhang J, Liu Z, Xiong Y (2011) Preparation and application of stability enhanced magnetic nanoparticles for rapid removal of Cr(VI). Chem Eng J 175:222–22710.1016/j.cej.2011.09.098 ↗
46. Manna B, Ghosh UC (2007) Adsorption of arsenic from aqueous solution on synthetic hydrous stannic oxide. J Hazard Mater 144:522–53110.1016/j.jhazmat.2006.10.066 ↗
47. Li Y, Xiao H, Chen M, Song Z, Zhao Y (2014) Absorbents based on maleic anhydride-modified cellulose fibers/diatomite for dye removal. J Mater Sci 49:6696–6704. https://doi.org/10.1007/s10853-014-8270-810.1007/s10853-014-8270-8 ↗
48. Wang J, Zhou X, Xiao H (2013) Structure and properties of cellulose/poly(N-isopropylacrylamide) hydrogels prepared by SIPN strategy. Carbohydr Polym 94:749–75410.1016/j.carbpol.2013.01.036 ↗
49. Chen S, Zhang J, Zhang C, Yue Q, Li Y, Li C (2010) Equilibrium and kinetic studies of methyl orange and methyl violet adsorption on activated carbon derived from Phragmites australis. Desalination 252:149–15610.1016/j.desal.2009.10.010 ↗
50. Tokuyama H, Yanagawa K, Sakohara S (2006) Temperature swing adsorption of heavy metals on novel phosphate-type adsorbents using thermosensitive gels and/or polymers. Sep Purif Technol 50:8–1410.1016/j.seppur.2005.11.001 ↗