Poling effects and piezoelectric properties of PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 piezoelectric ceramic composites
Source abstract
Abstract
PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 piezoelectric ceramic composites were fabricated using 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 (BNBT), Portland cement, and polyvinylidene fluoride (PVDF). The microstructure, acoustic impedance (Z c), dielectric properties, and influence of poling temperature and electrical poling field on the piezoelectric coefficient (d 33) and the total period of the poling process of composites with 50 vol% BNBT and 1–10 vol% PVDF were investigated. The results indicated that Z c, the dielectric constant, and the dielectric loss of the composites decrease as the PVDF content increases. The d 33 of the composites was found to enhance more clearly when the content of PVDF is more than 2 vol%. The d 33 results of the composites showed an optimum increase of 45% when 5 vol% PVDF was used (under an electrical poling field of 1.5 kV/mm and a poling temperature of 80°C). Moreover, these composites with PVDF were found to exhibit enhanced poling behavior in that the PVDF was able to reduce the total period of the poling process. Interestingly, the piezoelectric voltage coefficient (g 33) of the composite with 5 vol% PVDF content had the highest value of 33.59 mV·m/N. Therefore, it can be safely concluded that this new kind of PVDF-modified 0–3 connectivity cement-based/lead-free 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 piezoelectric ceramic composite has the potential to be used in concrete as a sensor for structural health monitoring applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Li Z, Zhang D, Wu K (2002) Cement-based 0–3 piezoelectric composite. J Am Ceram Soc 85:305–31310.1111/j.1151-2916.2002.tb00089.x ↗
2. Shifeng H, Jun C, Futian L, Lingchao L, Zhengmao Y, Xin C (2004) Poling process and piezoelectric properties of lead zirconate titanate/sulphoaluminate cement composites. J Mater Sci 39:6975–6979. doi: 10.1023/B:JMSC.0000047540.71855.3a10.1023/B:JMSC.0000047540.71855.3a ↗
3. Huang S, Chang J, Lu L, Liu F, Ye Z, Cheng X (2006) Preparation and polarization of 0–3 cement based piezoelectric composites. Mater Res Bull 41:291–29710.1016/j.materresbull.2005.08.026 ↗
4. Xin C, Shifeng H, Jun C, Zongjin L (2007) Piezoelectric, dielectric, and ferroelectric properties of 0–3 ceramic/cement composites. J Appl Phys 101(9):09411010.1063/1.2730559 ↗
5. Chaipanich A (2007) Dielectric and piezoelectric properties of PZT–cement composites. Curr Appl Phys 7:537–53910.1016/j.cap.2006.10.015 ↗
6. Chaipanich A, Jaitanong N, Tunkasiri T (2007) Fabrication and properties of PZT–ordinary Portland cement composites. Mater Lett 61:5206–520810.1016/j.matlet.2007.04.031 ↗
7. Jaitanong N, Chaipanich A (2008) Effect of poling temperature on piezoelectric properties of 0–3 PZT-Portland cement composites. Ferr Lett 35:17–2310.1080/07315170801992179 ↗
8. Gonga H, Li Z, Zhang Y, Fan R (2009) Piezoelectric and dielectric behavior of 0-3 cement-based composites mixed with carbon black. J Eur Ceram Soc 29:2013–201910.1016/j.jeurceramsoc.2008.11.014 ↗
9. Wang F, Wang H, Song Y, Sun H (2012) High piezoelectricity 0–3 cement-based piezoelectric composites. Mater Lett 76:208–21010.1016/j.matlet.2012.02.094 ↗
10. Pan HH, Lin DH, Yeh RH (2016) High piezoelectric and dielectric properties of 0–3 PZT/cement composites by temperature treatment. Cem Concr Compos 72:1–810.1016/j.cemconcomp.2016.05.025 ↗
11. Takenaka T, Nagata H (2005) Current status and prospects of lead-free piezoelectric ceramics. J Eur Ceram Soc 25:2693–270010.1016/j.jeurceramsoc.2005.03.125 ↗
12. Panda PK (2009) Review: environmental friendly lead-free piezoelectric materials. J Mater Sci 44:5049–5062. doi: 10.1007/s10853-009-3643-010.1007/s10853-009-3643-0 ↗
13. Rianyoi R, Potong R, Jaitanong N, Yimnirun R, Chaipanich A (2011) Dielectric, ferroelectric and piezoelectric properties of 0-3 barium titanate–Portland cement composites. Appl Phys A Mater Sci Process 104:661–66610.1007/s00339-011-6307-2 ↗
14. Potong R, Rianyoi R, Chaipanich A (2011) Dielectric properties of lead-free composites from 0–3 barium zirconate titanate-Portland cement composites. Ferr Lett 38:18–2310.1080/07315171.2011.570176 ↗
15. Potong R, Rianyoi R, Ngamjarurojana A, Chaipanich A (2012) Ferroelectric hysteresis properties of 0–3 lead-free barium zirconate-Portland cement composites. Ferr Lett 39:15–1910.1080/07315171.2012.707029 ↗
16. Rianyoi R, Potong R, Ngamjarurojana A, Chaipanich A (2013) Influence of barium titanate content and particle size on electromechanical coupling coefficient of lead-free piezoelectric ceramic–Portland cement composites. Ceram Int 39:S47–S5110.1016/j.ceramint.2012.10.033 ↗
17. Potong R, Rianyoi R, Ngamjarurojana A, Yimnirun R, Guo R, Bhalla AS, Chaipanich A (2013) Acoustic and piezoelectric properties of 0–3 barium zirconate titanate-Portland cement composites-effects of BZT content and particle size. Ferroelectrics 455:69–7610.1080/00150193.2013.843955 ↗
18. Rianyoi R, Potong R, Ngamjarurojana A, Chaipanich A (2016) Microstructure and electrical properties of 0–3 connectivity barium titanate–Portland cement composite with 40% barium titanate content. Ferr Lett 43(1–3):59–6410.1080/07315171.2016.1174006 ↗
19. Xu C, Lin D, Kwok KW (2008) Structure, electrical properties and depolarization temperature of (Bi0.5Na0.5)TiO3–BaTiO3 lead-free piezoelectric ceramics. Solid State Sci 10:934–94010.1016/j.solidstatesciences.2007.11.003 ↗
20. Swain S, Kar SK, Kumar P (2015) Dielectric, optical, piezoelectric and ferroelectric studies of NBT–BT ceramics near MPB. Ceram Int 41:10710–1071710.1016/j.ceramint.2015.05.005 ↗
21. Chu BJ, Chen DR, Li GR, Yin QR (2002) Electrical properties of Bi0.5Na0.5TiO3–BaTiO3 ceramics. J Eur Ceram Soc 22:2115–212110.1016/S0955-2219(02)00027-4 ↗
22. Balakt AM, Shaw CP, Qi Zhang (2017) Large pyroelectric properties at reduced depolarization temperature in A-site nonstoichiometry composition of lead-free 0.94NaxBiyTiO3–0.06BazTiO3 ceramics. J Mater Sci 52:7382–7393. doi: 10.1007/s10853-017-0973-110.1007/s10853-017-0973-1 ↗
23. Jaitanong N, Yimnirun R, Zeng HR, Li GR, Yin QR, Chaipanich A (2014) Piezoelectric properties of cement based/PVDF/PZT composites. Mater Lett 130:146–14910.1016/j.matlet.2014.05.040 ↗
24. Gregorio RJ, Cestari MJ (1994) Effect of crystallization temperature on the crystalline phase content and morphology of poly(vinylidene fluoride). J Polym Sci B Polym Phys 32:859–87010.1002/polb.1994.090320509 ↗
25. Kawai H (1969) The piezoelectricity of poly (vinylidene fluoride). Jpn J Appl Phys 8:975–97610.1143/JJAP.8.975 ↗
26. Kepler RG (1978) Piezoelectricity, pyroelectricity and ferroelectricity in organic materials. Ann Rev Phys Chem 29:497–51810.1146/annurev.pc.29.100178.002433 ↗
27. Sessler GM (1981) Piezoelectricity in polyvinylidenefluoride. J Acoust Soc Am 70(6):1596–160810.1121/1.387225 ↗
28. Chiolerio A, Lombardi M, Guerriero A et al (2013) Effect of the fabrication method on the functional properties of BaTiO3: PVDF nanocomposites. J Mater Sci 48:6943–6951. doi: 10.1007/s10853-013-7500-910.1007/s10853-013-7500-9 ↗
29. Dias JC, Correia DC, Lopes AC et al (2016) Development of poly(vinylidene fluoride)/ionic liquid electrospun fibers for tissue engineering applications. J Mater Sci 51:4442–4450. doi: 10.1007/s10853-016-9756-310.1007/s10853-016-9756-3 ↗
30. Wu CM, Chou MH (2016) Polymorphism, piezoelectricity and sound absorption of electrospun PVDF membranes with and without carbon nanotubes. Compos Sci Technol 127:127–13310.1016/j.compscitech.2016.03.001 ↗
31. Silva AJJ, Nascimento CR, da Costa MF (2016) Thermomechanical properties and long-term behavior evaluation of poly(vinylidene fluoride) (PVDF) exposed to bioethanol fuel under heating. J Mater Sci 51:9074–9094. doi: 10.1007/s10853-016-0159-210.1007/s10853-016-0159-2 ↗
32. Ma B, Yang J, Sun Q, Jakpa W, Hou X, Yang Y (2017) Influence of cellulose/[Bmim]Cl solution on the properties of fabricated NIPS PVDF membranes. J Mater Sci. doi: 10.1007/s10853-017-1150-210.1007/s10853-017-1150-2 ↗
33. Lang SB, Muensit S (2006) Review of some lesser-known applications of piezoelectric and pyroelectric polymers. Appl Phys A 85:125–13410.1007/s00339-006-3688-8 ↗
34. Mishra P, Kumar P (2013) Dielectric properties of 0.25(BZT–BCT)–0.75[(1 − x)PVDF–xCCTO] (x = 0.02, 0.04, 0.06, 0.08 and 0.1) composites for embedded capacitor applications. Compos Sci Technol 88:26–3210.1016/j.compscitech.2013.08.020 ↗
35. Tomer V, Randall CA, Polizos G, Kostelnick J, Manias E (2008) High- and low-field dielectric characteristics of dielectrophoretically aligned ceramic/polymer nanocomposites. J Appl Phys 103:03411510.1063/1.2838481 ↗
36. Misirlioglu B, Kesim MT, Alpay SP (2014) Strong dependence of dielectric properties on electrical boundary conditions and interfaces in ferroelectric superlattices. J Appl Phys Lett 104:02290610.1063/1.4862408 ↗
37. Mangeri J, Yomery E, Andrea J, Alpya SP, Nakhmanson S, Heinonen O (2017) Topological phase transformations and intrinsic size effects in ferroelectric nanoparticles. Nanoscale 9:1616–162410.1039/C6NR09111C ↗
38. Kumar A, Bhanu Prasad VV, James Raju KC, James AR (2015) Optimization of poling parameters of mechanically processed PLZT 8/60/40 ceramics based on dielectric and piezoelectric studies. Eur Phys J B 88:28710.1140/epjb/e2015-60414-9 ↗