Laser ablation protection of polymer matrix composites by adhesive inorganic coatings
Source abstract
Abstract
Further utilization of polymer matrix composites (PMCs) in the aerospace industry is threatened by the development of laser weapons, resulting from weak oxidation resistance, low operation temperature and poor anti-laser ablation performance of the PMCs. Preparing an adhesive inorganic coating on the surface of components is an effective method to improve the laser irradiation resistance. Anti-laser ablation coatings composed of ZrO2 as pigment and sodium silicate as binder with different curing agents (including SiO2 and Na2SiF6) are fabricated on the PMCs substrate with brush painting. Influence of the different curing agents on anti-laser ablation of the coatings at the laser wavelength of 1064 nm is investigated. The rear surface temperature of substrate with coatings, containing SiO2 and Na2SiF6, decreases from 240 to 60 and 70 °C, respectively, when testing at 1000 W for 5 s. After irradiation test at 1000 W for 10 s, the coating with SiO2 as curing agent shows slight molten state on the surface, while the coating with Na2SiF6 is broke down, because coating containing SiO2 possesses more compact microstructure and fewer cracks than that with Na2SiF6.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Glass properties and applications · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Zhong ZL, Li MY, Liao ZD, Lu LL (2016) The impact of adhesive resin solution on carbon fibers cloth and jute-reinforced epoxy resin matrix composites. J Text Inst 107:1264–126710.1080/00405000.2015.1100818 ↗
2. Guo H, Huang YD, Liu L, Shi XH (2010) Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix composites. Mater Des 31:1186–119010.1016/j.matdes.2009.09.034 ↗
3. Li J, Guan ZW, Zhang YZ, Wang Y, Wang ZY (2014) Laser ablation resistance behavior of organosilicone composite coating on various substrates. Mater Sci Forum 789:461–46510.4028/www.scientific.net/MSF.789.461 ↗
4. Chen Z, Cheng H, Tao J, Wan S, Wu W (2009) Influence of irradiation time on laser ablation behavior of polycarbosilanes coating. J Polym Eng 29:385–393
5. Li J (2008) Interfacial studies on the O3 modified carbon fiber-reinforced polyamide 6 composites. Appl Surf Sci 255:2822–282410.1016/j.apsusc.2008.08.013 ↗
6. Arai M, Ochiai H, Suidzu T (2016) A novel low-thermal-conductivity plasma-sprayed thermal barrier coating controlled by large pores. Surf Coat Technol 285:120–12710.1016/j.surfcoat.2015.11.022 ↗
7. Qing YC, Su JB, Wen QL, Luo F, Zhu DM, Zhou WC (2015) Enhanced dielectric and electromagnetic interference shielding properties of FeSiAl/Al2O3 ceramics by plasma spraying. J Alloys Compd 651:259–26510.1016/j.jallcom.2015.08.107 ↗
8. Yang W, Xiong J, Guo ZX, Du H, Yang TN, Tang J, Wen B (2017) Structure and properties of PVD TiAlN and TiAlN/CrAlN coated Ti(C, N)-based cermets. Ceram Int 43:1911–191510.1016/j.ceramint.2016.10.151 ↗
9. Skordaris G, Bouzakis KD, Kotsanis T, Charalampous P, Bouzakis E, Lemmer O, Bolz S (2015) Film thickness effect on mechanical properties and milling performance of nano-structured multilayer PVD coated tools. Surf Coat Technol 307:452–46010.1016/j.surfcoat.2016.09.026 ↗
10. Sun N, Wang C, Jiao L, Zhang J, Zhang D (2017) Controllable coating of boron nitride on ceramic fibers by CVD at low temperature. Ceram Int 43:1509–151610.1016/j.ceramint.2016.10.123 ↗
11. Toller L, Liu C, Holmström E, Larsson T, Norgren S (2017) Investigation of cemented carbides with alternative binders after CVD coating. Int J Refract Met Hard 62:225–22910.1016/j.ijrmhm.2016.07.005 ↗
12. Yim YJ, Rhee KY, Park SJ (2015) Influence of electroless nickel-plating on fracture toughness of pitch-based carbon fibre reinforced composites. Compos Part B Eng 76:286–29110.1016/j.compositesb.2015.01.052 ↗
13. Liu Z, He F, Gao F, Ren B, Huang Y (2016) Fabrication and electromagnetic properties of novel FeNi alloy-coated flake graphite prepared by electrolessplating. J Alloys Compd 656:51–5710.1016/j.jallcom.2015.09.202 ↗
14. Park SJ, Ko TJ, Yoon J, Moon MW, Oh KH, Han JH (2017) Copper circuit patterning on polymer using selective surface modification and electroless plating. Appl Surf Sci 396:1678–168410.1016/j.apsusc.2016.12.007 ↗
15. Zhang J, Bu X, Ma B, Jiao H, Cheng X, Wang Z (2017) Research on the mechanical stability of high laser resistant coatings on lithium triborate crystal. Appl Opt 57:117–12210.1364/AO.56.00C117 ↗
16. Zou Y, Zhao LL, You LJ, Chen XY, Song LX (2016) Preparation and numerical simulation investigation of high reflectance anti-laser-ablation coating. J Inorg Mater 31:869–87510.15541/jim20150633 ↗
17. Langlet M, Burgos M, Coutier C, Jimenez C, Morant M Manso (2001) Low temperature preparation of high refractive index and mechanically resistant sol–gel TiO2 films for multilayer antireflective coating applications. Sol Gel Sci Technol 2:695–705
18. Sta I, Jlassi M, Hajji M, Boujmil MF, Jerbi R, Kandyla M, Kompitsas M, Ezzaouia H (2014) Structural and optical properties of TiO2 thin film prepared by spin coating. J Sol Gel Sci Technol 72:421–42710.1007/s10971-014-3452-z ↗
19. Kumar SP, Takamori S, Araki H, Kuroda S (2015) Flame retardancy of clay–sodium silicate composite coatings on wood for construction purposes. RSC Adv 5:34109–3411610.1039/C5RA04682C ↗
20. Huang W, Cheng H, Zhang C, Zhou Y, Cao X (2015) Thermal ablation of stabilized zirconia/metal coated polyimide matrix composites via plasma spray process. Plasma Chem Plasma Process 35:587–60310.1007/s11090-015-9612-2 ↗
21. Balagna C, Perero S, Ferraris S, Miola M, Fucale G, Manfredotti C, Battiato A, Santella D, Verne E, Vittone E, Ferraris M (2012) Antibacterial coating on polymer for space application. Mater Chem Phys 135:714–72210.1016/j.matchemphys.2012.05.049 ↗
22. Wuu DS, Lo WC, Chiang CC, Lin HB, Chang LS, Horng RH, Huang CL, Gao YJ (2005) Water and oxygen permeation of silicon nitride films prepared by plasma-enhanced chemical vapor deposition. Surf Coat Technol 198:114–11710.1016/j.surfcoat.2004.10.034 ↗
23. Liu N, Wang YJ, Zhou M, Jing XF, Wang YZ, Cui Y, Jin YX (2010) Laser resistance of Ta2O5/SiO2 and ZrO2/SiO2 optical coatings under 2 μm femtosecond pulsed irradiation. Chin Phys Lett 27:07421510.1088/0256-307X/27/7/074215 ↗
24. Yan ZY, Ma Z, Liu L, Zhu SZ, Gao LH (2014) The ablation behavior of ZrB2/Cu composite irradiated by high-intensity continuous laser. J Eur Ceram Soc 34:2203–220910.1016/j.jeurceramsoc.2014.02.006 ↗
25. Li X, Liu XF, Zhao YA, Shao JD, Fan ZX (2010) Laser-conditioning mechanism of ZrO2/SiO2 HR films with fitting damage probability curves of laser-induced damage. Chin Opt Lett 8:598–60010.3788/COL20100806.0598 ↗