Chromium vaporization of the ferritic steel Crofer22APU and ODS Cr5Fe1Y2O3 alloy
Source abstract
Abstract
The chromium vaporization rate of the Crofer22APU steel as compared to Cr5Fe1Y2O3 alloy was studied under humidified air at 800 °C over a period of up to 1300 h by using the transpiration method. Under oxidizing atmosphere, the Crofer22APU steel forms a (Cr,Mn)3O4 spinel layer on the surface, which hinders chromium release at 800 °C by about a factor of 3 as compared to Cr5Fe1Y2O3 alloy forming a pure chromia scale. The impact of minor alloying additives in the Crofer22APU ferritic steel on the chromium vaporization was considered. The steel with the lowest amount of Al and Si in the matrix exhibits a low chromium vaporization rate over 1300 h. The microstructure and composition of the oxide scales and surfaces formed were investigated using high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry. The results obtained give insight into the chromium vaporization mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Quadakkers WJ, Piron-Abellan J, Shemet V, Singheiser L (2003) Mater high temp 20(2):115
2. Piron-Abellan J, Shemet V, Tietz F, Singheiser L, Quadakkers WJ (2001) In: Yokokawa H, Singhal SC (eds) Proceedings of the 7th international symposium on solid oxide fuel cells (SOFC VII), Tsukuba, Japan, June 2001, The Electrochemical Society Proceedings, Pennington, NJ, 2001 PV. 2001–16, p 811
3. Huczkowski P, Christiansen N, Shemet V, Singheiser L, Quadakkers WJ (2004) In: Mogensen M (ed) Proceedings of the 6th European solid oxide fuel cell forum, Lucerne, Switzerland, July 2004, European Fuel Cell Forum, Oberrohrdorf, 2004 3:1594
4. Huczkowski P, Christiansen N, Shemet V, Piron-Abellan J, Singheiser L, Quadakkers WJ (2004) Mater Corr 55(11):82510.1002/maco.200303798 ↗
5. Xie JJ, Yoo Y, Davidson I, Ghosh D (2004) In: Mogensen M (ed) Proceedings of the 6th European solid oxide fuel cell forum, Lucerne, Switzerland, July 2004, European Fuel Cell Forum, Oberrohrdorf, 2004 3:1602
6. Yang Z, Hardy JS, Walker MS, Xia G, Simner SP, Stevenson JW (2004a) J Electrochem Soc 151(11):A182510.1149/1.1797031 ↗
7. Yang Z, Walker MS, Singh P, Stevenson JW, Norby T (2004b) J Electrochem Soc 151(12):B66910.1149/1.1810393 ↗
8. Yang Z, Xia G, Singh P, Stevenson JW (2005) Solid State Ionics 176:149510.1016/j.ssi.2005.03.019 ↗
9. Sakai N, Horita T, Xiong YP, Yamaji K, Kishimoto H, Brito ME, Yokokawa H, Maruyama T (2005) Solid State Ionics 176:68110.1016/j.ssi.2004.11.012 ↗
10. Gindorf C, Singheiser L, Hilpert K (2001) Steel Res 72(11/12):52810.1002/srin.200100163 ↗
11. Hilpert K, Das D, Miller M, Peck DH, Weiss R (1996) J Electrochem Soc 143:364210.1149/1.1837264 ↗
12. Konycheva E, Penkalla H, Wessel E, Seeling U, Singheiser L, Hilpert K (2001) In: Singhal SC, Mizusaki J (eds) Proceedings of the 9th international symposium on solid oxide fuel cells (SOFC IX), Quebec, Canada, May 2005, The Electrochemical Society Proceedings, Pennington, NJ, 2001, PV 2005–07, p 1874
13. Merten U, Bell WE (1967) The characterization of high-temperature vapors. John Wiley and Sons, New York, London, Sydney, 1967, p 98
14. Becker JS (2002) Spectrochimica Acta B 57:180510.1016/S0584-8547(02)00213-6 ↗
15. Kofstad P (1988) High temperature corrosion. Elsevier Applied Science Publishers Ltd, London and New York p 558
16. Hagel WS (1963) Trans ASM 56:583
17. Konysheva E, Penkalla H, Wessel E, Mertens J, Seeling U, Singheiser L, Hilpert K (2006) J Electrochem Soc 153:A76510.1149/1.2172563 ↗
18. Knacke O, Stranski IN (1956) Prog Metal Phys 6:18110.1016/0502-8205(56)90007-7 ↗
19. Somorjai GA, Lester JE (1967) Prog Solid State Chem 4:110.1016/0079-6786(67)90004-0 ↗