Synthesis and characterization of CuFeMnO4 prepared by co-precipitation method
Source abstract
Abstract
CuFeMnO4 spinel oxide was synthesized by co-precipitation method through calcination of the precipitate precursor at 500–900 °C. The reaction process was investigated by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The structure, valence state and magnetic properties of the powders obtained were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometer (VSM) further. The results revealed that the precipitate is composed of amorphous metal hydroxides and oxides, after which the spinel structure and several phases, such as CuO, Fe3O4 and Mn3O4, turned up in the calcined powders. As the calcining temperature raising, these phases began to transform into a single phase of CuFeMnO4. However, CuO phase segregated from the spinel structure with further calcining. The valence state of Mn ions in octahedral sites and Cu ions in tetrahedral sites were ascertained by XPS, which showed the reduction of Mn4+ and Cu+ during the calcining procedure. Besides, the magnetization of the samples increased obviously with the calcining temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Copper-based nanomaterials and applications · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Karan NS, Sarma DD, Kadam RM, Pradhan N (2010) Doping transition metal (Mn or Cu) ions in semiconductor nanocrystals. J Phys Chem Lett 1(19):2863–286610.1021/jz1012164 ↗
2. Kharisov BI, Dias HVR, Kharissova OV (2014) Mini-review: ferrite nanoparticles in the catalysis. Arab J Chem. http://dx.doi.org/10.1016/j.arabjc.2014.10.04910.1016/j.arabjc.2014.10.049 ↗
3. Long NV, Yang Y, Teranishi T, Cao MT, Cao Y, Nogami M (2015) Synthesis and magnetism of hierarchical iron oxide particles. Mater Design 86:797–80810.1016/j.matdes.2015.07.157 ↗
4. Quan J, Mei L, Ma Z, Huang J, Li D (2016) Cu1.5Mn1.5O4 spinel: a novel anode material for lithium-ion batteries. Rsc Adv 6(61):55786–5579110.1039/C6RA08308K ↗
5. Rogov A, Mugnier Y, Bonacina L (2015) Harmonic nanoparticles: noncentrosymmetric metal oxides for nonlinear optics. J Opt 17:033001. https://doi.org/10.1088/2040-8978/17/3/03300110.1088/2040-8978/17/3/033001 ↗
6. Hu J, Lo IM, Chen G (2005) Fast removal and recovery of Cr(VI) using surface-modified jacobsite (MnFe2O4) nanoparticles. Langmuir 21(24):11173–1117910.1021/la051076h ↗
7. Long NV, Yang Y, Teranishi T, Cao MT, Cao Y, Nogami M (2015) Related magnetic properties of CoFe2O4 cobalt ferrite particles synthesised by the polyol method with NaBH4 and heat treatment: new micro and nanoscale structures. Rsc Adv 5(70):56560–5656910.1039/C5RA10015A ↗
8. Randhawa BS, Dosanjh HS, Kaur M (2009) Preparation of spinel ferrites from citrate precursor route—a comparative study. Ceram Int 35(3):1045–104910.1016/j.ceramint.2008.04.031 ↗
9. Zhang G, Qu J, Liu H, Cooper AT, Wu R (2007) CuFe2O4/activated carbon composite: a novel magnetic adsorbent for the removal of acid orange II and catalytic regeneration. Chemosphere 68(6):1058–106610.1016/j.chemosphere.2007.01.081 ↗
10. Long N, Yang Y, Yuasa M, Thi C, Cao Y, Nann T, Nogami M (2013) Controlled synthesis and characterization of iron oxide nanostructures with potential applications for gas sensors and the environment. Rsc Adv 4(4):6383–6390
11. Zhang R, Liu J, Wang S et al (2011) Magnetic CuFe2O4 nanoparticles as an efficient catalyst for CO cross-coupling of phenols with aryl halides. Chemcatchem 3(1):146–14910.1002/cctc.201000254 ↗
12. Birajdar DS, Devatwal UN, Jadhav KM (2002) X-ray, IR and bulk magnetic properties of Cu1+xMnxFe2–2xO4 ferrite system. J Mater Sci 37(7):1443–1448. https://doi.org/10.1023/A:101450562025410.1023/A:1014505620254 ↗
13. Patil BL, Sawant SR, Patil SA, Patil RN (1993) The electrical properties of Ge4+ substituted copper ferrite. Czech J Phys 43(2):179–18510.1007/BF01589640 ↗
14. Patil BL, Sawant SR, Patil SA, Patil RN (1994) Electrical properties of Si4+ substituted copper ferrite. J Mater Sci 29(1):175–178. https://doi.org/10.1007/BF0035659010.1007/BF00356590 ↗
15. Patil BL, Sawant SR, Suryavanshi SS, Patil SA (1993) Conduction mechanism in Sn4+ substituted copper ferrite. B Mater Sci 16(4):267–27110.1007/BF02746036 ↗
16. Ayieko CO (2016) Optical characterization of TiO2-bound (CuFeMnO4) absorber paint for solar thermal applications. Am J Energy Res 4(1):11–15
17. Long NV, Yang Y, Teranishi T, Thi CM, Cao Y, Nogami M (2015) Biomedical applications of advanced multifunctional magnetic nanoparticles. J Nanosci Nanotechnol 15(12):1009110.1166/jnn.2015.11691 ↗
18. Orel ZC (1999) Characterisation of high-temperature-resistant spectrally selective paints for solar absorbers. Sol Energy Mater Sol Cells 57(3):291–30110.1016/S0927-0248(98)00181-0 ↗
19. Tanaka Y, Takeguchi T, Kikuchi R, Eguchi K (2004) Steam reforming of dimethyl ether over composite catalysts of alumina and Cu–Mn–Fe spinel oxide. In: Meeting Abstracts—205th Meeting of The Electrochemical Society, MA 2004 01, p 668
20. Fan Y, Siriwardane R, Tian H (2015) Trimetallic oxygen carriers CuFeMnO4, CuFeMn2O4, and CuFe0.5Mn1.5O4 for chemical looping combustion. Energy Fuel 29(10):150909010850007
21. Kaluža L, Šurca-Vuk A, Orel B, Dražič G, Pelicon P (2001) Structural and IR spectroscopic analysis of sol–gel processed CuFeMnO4 spinel and CuFeMnO4/silica films for solar absorbers. J Sol–Gel Sci Technol 20(1):61–8310.1023/A:1008728717617 ↗
22. Gingasu D, Mindru I, Patron L et al (2012) Synthesis of CuGa2O4 nanoparticles by precursor and self-propagating combustion methods. Ceram Int 38(8):6739–675110.1016/j.ceramint.2012.05.067 ↗
23. Hernandez-Moreno MJ, Ulibarri MA, Rendon JL, Serna CJ (1985) IR characteristics of hydrotalcite-like compounds. Phys Chem Miner 12(1):34–3810.1007/BF00348744 ↗
24. Köseoğlu Y (2013) Structural, magnetic, electrical and dielectric properties of MnxNi1−xFe2O4 spinel nanoferrites prepared by PEG assisted hydrothermal method. Ceram Int 39(4):4221–423010.1016/j.ceramint.2012.11.004 ↗
25. Sang-Koo K, Ken Apos K et al (2005) Inhibition of conversion process from Fe(OH)3 to β-FeOOH and α-Fe2O3 by the addition of silicate ions. ISIJ Int 45(1):77–8110.2355/isijinternational.45.77 ↗
26. Patterson AL (1939) The Scherrer formula for X-ray particle size determination. Phys Rev 56(10):978–98210.1103/PhysRev.56.978 ↗
27. Paufler P (2010) R. A. Young (ed) The Rietveld method. International Union of Crystallography. Oxford University Press 1993. 298 p. Price £ 45.00. ISBN 0–19–855577–6. Cryst Res Technol 30(4):494
28. Lenglet M, D’Huysser A, Kasperek J, Bonnelle JP, Dūrr J (1985) Caracterisation des etats d’oxydation du cuiver et du manganese dans quelques manganites par analyse des spectres XPS, d’emission X et des seuils d’absorption X. Mater Res Bull 20(7):745–75710.1016/0025-5408(85)90053-4 ↗
29. Bayón R, Vicente GS, Maffiotte C, Morales Á (2008) Characterization of copper–manganese–oxide thin films deposited by dip-coating. Sol Energy Mater Sol Cells 92(10):1211–121610.1016/j.solmat.2008.04.011 ↗
30. Gillot B, Buguet S, Kester E, Baubet C, Tailhades P (1999) Cation valencies and distribution in the spinels CoxCuyMnzFeuO4+δ (δ ≥ 0) thin films studied by X-ray photoelectron spectroscopy. Thin Solid Films 357(2):223–23110.1016/S0040-6090(99)00402-2 ↗
31. Geng QF, Zhao X, Gao XH, Liu G (2011) Sol–gel combustion-derived CoCuMnOx spinels as pigment for spectrally selective paints. J Am Ceram Soc 94(3):827–83210.1111/j.1551-2916.2010.04182.x ↗
32. Ma P, Geng Q, Gao X, Yang S, Gang L (2016) Aqueous solution-chemical derived spinel Cu1.5Mn1.5O4 thin film for solar absorber application. Mater Lett 179:170–17410.1016/j.matlet.2016.05.090 ↗
33. Papavasiliou J, Avgouropoulos G, Ioannides T (2007) Combined steam reforming of methanol over Cu–Mn spinel oxide catalysts. J Catal 251(1):7–2010.1016/j.jcat.2007.07.025 ↗
34. Terayama K, Ikeda M (2007) Study on thermal decomposition of MnO2 and Mn2O3 by thermal analysis. Mater Trans 24(11):754–758
35. Yamashita T, Hayes P (2008) Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials. Appl Surf Sci 254(8):2441–244910.1016/j.apsusc.2007.09.063 ↗
36. Li F, Liu X, Yang Q, Liu J, Evans DG, Duan X (2005) Synthesis and characterization of Ni1−xZnxFe2O4 spinel ferrites from tailored layered double hydroxide precursors. Mater Res Bull 40(8):1244–125510.1016/j.materresbull.2005.04.011 ↗
37. Kumar L, Kar M (2011) Influence of Al3+ ion concentration on the crystal structure and magnetic anisotropy of nanocrystalline spinel cobalt ferrite. J Magn Magn Mater 323(15):2042–204810.1016/j.jmmm.2011.03.010 ↗
38. Thang PD, Rijnders G, Blank DHA (2005) Spinel cobalt ferrite by complexometric synthesis. J Magn Magn Mater 295(3):251–25610.1016/j.jmmm.2005.01.011 ↗