High surface area ordered mesoporous carbon for high-level removal of rhodamine B

We report the synthesis of ordered mesoporous carbons (OMCs) with high surface area by the variation of mass ratio of tetraethylorthosilicate (TEOS) to resol, followed by carbonization and removal of silica. The obtained OMCs were characterized by X-ray diffraction, transmission electron microscopy, scanning electron microscopy, N2 adsorption and desorption analysis, Zeta potential and Fourier transform infrared spectroscopy. Results reveal that the OMCs were transformed from ordered to disordered structure at high mass ratio of TEOS/resol. A typical sample of OMCs possesses very high specific surface area of 1906 m2 g−1 and large pore volume of 1.8 cm3 g−1. The OMCs as adsorbent show an ultrahigh-level adsorption capacity for the removal of toxic dye Rhodamine B (1028 mg g−1) in the short contact time (60 min). The adsorption follows pseudo second-order kinetics with rate constant 2.5 × 10−4 g mg−1 min−1, showing rapid adsorption properties. The OMCs can be reused; though the adsorption capacity seems to decrease somewhat after each cycle tested over 10 reuse cycles, it might be affected by the chemisorptions. The adsorption mechanism study reveals that the adsorption proceeds with hydrogen bonding between hydrogen atom of carboxylic group at OMCs and electronegative element (nitrogen) of RhB. It is concluded that the surface area and pore volume of the OMCs is tuned by the variation of mass ratio of TEOS to resol which is also demonstrated to have ultrahigh adsorption capacity for the model RhB dye.