Effect of surface and bulk palladium doping on the catalytic activity of La2Sn2O7 pyrochlore oxides for diesel soot oxidation
Source abstract
Abstract
The soot combustion on Pd-doped La2Sn2O7 pyrochlore oxides was studied. Palladium promoter was doped into the pyrochlore system via two ways: bulk substitution (La2Sn1.9Pd0.1O7) and surface impregnation (Pd/La2Sn2O7). The catalysts were characterized by XRD, BET, SEM, HRTEM, PL, XPS and H2-TPR measurements. Pd modifications increased the concentration of surface oxygen vacancy, especially Pd/La2Sn2O7. The different morphologies of palladium promoters were revealed in the two palladium-doped catalysts. Palladium was present primarily in the form of a lattice Pd2+ in the bulk-doping sample, with trace of metal palladium deposited on the surface. As for the surface-doping sample, PdO was the predominant form, accompanied with some of highly dispersed metallic palladium. Due to the adhesion of massive surface palladium species on Pd/La2Sn2O7, a strong metal oxide interaction occurred in the interface between Pd species and La2Sn2O7. The activity evaluation results show that Pd/La2Sn2O7 possesses the highest performance, exhibiting the lowest activation energy (98.83 kJ/mol) for soot combustion. Surface Pd/PdO redox couples as well as Pd–O–Sn interface species were identified to be the active phases for the superior catalytic behavior of Pd/La2Sn2O7. A possible oxidation mechanism for the reactions has been speculated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear materials and radiation effects · Radioactive element chemistry and processing · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Castoldi L, Matarrese R, Lietti L, Forzatti P (2009) Intrinsic reactivity of alkaline and alkaline-earth metal oxide catalysts for oxidation of soot. Appl Catal B Environ 90(1–2):278–285. https://doi.org/10.1016/j.apcatb.2009.03.02210.1016/j.apcatb.2009.03.022 ↗
2. Andana T, Piumetti M, Bensaid S, Veyre L, Thieuleux C, Russo N, Fino D, Quadrelli EA, Pirone R (2017) CuO nanoparticles supported by ceria for NOx-assisted soot oxidation: insight into catalytic activity and sintering. Appl Catal B Environ 216:41–58. https://doi.org/10.1016/j.apcatb.2017.05.06110.1016/j.apcatb.2017.05.061 ↗
3. Białobok B, Trawczyński J, Rzadki T, Miśta W, Zawadzki M (2007) Catalytic combustion of soot over alkali doped SrTiO3. Catal Today 119(1–4):278–285. https://doi.org/10.1016/j.cattod.2006.08.02410.1016/j.cattod.2006.08.024 ↗
4. Fino D, Bensaid S, Piumetti M, Russo N (2016) A review on the catalytic combustion of soot in diesel particulate filters for automotive applications: from powder catalysts to structured reactors. Appl Catal A Gen 509:75–96. https://doi.org/10.1016/j.apcata.2015.10.01610.1016/j.apcata.2015.10.016 ↗
5. Oi-Uchisawa J, Wang S, Nanba T, Ohi A, Obuchi A (2003) Improvement of Pt catalyst for soot oxidation using mixed oxide as a support. Appl Catal B Environ 44(3):207–215. https://doi.org/10.1016/s0926-3373(03)00055-910.1016/s0926-3373(03)00055-9 ↗
6. Venkataswamy P, Jampaiah D, Rao KN, Reddy BM (2014) Nanostructured Ce0.7Mn0.3O2−δ and Ce0.7Fe0.3O2−δ solid solutions for diesel soot oxidation. Appl Catal A Gen 488:1–10. https://doi.org/10.1016/j.apcata.2014.09.01410.1016/j.apcata.2014.09.014 ↗
7. Wagloehner S, Nitzer-Noski M, Kureti S (2015) Oxidation of soot on manganese oxide catalysts. Chem Eng J 259:492–504. https://doi.org/10.1016/j.cej.2014.08.02110.1016/j.cej.2014.08.021 ↗
8. Uner D, Demirkol MK, Dernaika B (2005) A novel catalyst for diesel soot oxidation. Appl Catal B Environ 61(3–4):334–345. https://doi.org/10.1016/j.apcatb.2005.05.01110.1016/j.apcatb.2005.05.011 ↗
9. Kimura R, Elangovan SP, Ogura M, Ushiyama H, Okubo T (2011) Alkali carbonate stabilized on aluminosilicate via solid ion exchange as a catalyst for diesel soot combustion. J Phys Chem C 115(30):14892–14898. https://doi.org/10.1021/jp203466410.1021/jp2034664 ↗
10. Liu S, Wu X, Weng D, Ran R (2015) Ceria-based catalysts for soot oxidation: a review. J Rare Earth 33(6):567–590. https://doi.org/10.1016/s1002-0721(14)60457-910.1016/s1002-0721(14)60457-9 ↗
11. Neyertz CA, Banús ED, Miró EE, Querini CA (2014) Potassium-promoted Ce0.65Zr0.35O2 monolithic catalysts for diesel soot combustion. Chem Eng J 248:394–405. https://doi.org/10.1016/j.cej.2014.03.04810.1016/j.cej.2014.03.048 ↗
12. Liang D, Liu H, Liu N, Ling L, Han Y, Zhang L, Zhang C (2016) Structural, magnetic and electrical properties in the pyrochlore oxide Bi2−xCaxIr2O7−δ. Ceram Int 42(3):4562–4566. https://doi.org/10.1016/j.ceramint.2015.11.14910.1016/j.ceramint.2015.11.149 ↗
13. Jitta RR, Gundeboina R, Veldurthi NK, Guje R, Muga V (2015) Defect pyrochlore oxides: as photocatalyst materials for environmental and energy applications—a review. J Chem Technol Biotechnol 90(11):1937–1948. https://doi.org/10.1002/jctb.474510.1002/jctb.4745 ↗
14. Tian J, Peng H, Xu X, Liu W, Ma Y, Wang X, Yang X (2015) High surface area La2Sn2O7 pyrochlore as a novel, active and stable support for Pd for CO oxidation. Catal Sci Technol 5(4):2270–2281. https://doi.org/10.1039/c4cy01553c10.1039/c4cy01553c ↗
15. Gaur S, Pakhare D, Wu H, Haynes DJ, Spivey JJ (2012) CO2 reforming of CH4 over Ru-substituted pyrochlore catalysts: effects of temperature and reactant feed ratio. Energy Fuels 26(4):1989–1998. https://doi.org/10.1021/ef300158y10.1021/ef300158y ↗
16. Ma Y, Wang X, You X, Liu J, Tian J, Xu X, Peng H, Liu W, Li C, Zhou W, Yuan P, Chen X (2014) Nickel-supported on La2Sn2O7 and La2Zr2O7 pyrochlores for methane steam reforming: insight into the difference between tin and zirconium in the B site of the compound. ChemCatChem 6(12):3366–3376. https://doi.org/10.1002/cctc.20140255110.1002/cctc.201402551 ↗
17. Kurnatowska M, Kepinski L, Mista W (2012) Structure evolution of nanocrystalline Ce1−xPdxO2−y mixed oxide in oxidizing and reducing atmosphere: reduction-induced activity in low-temperature CO oxidation. Appl Catal B Environ 117–118:135–147. https://doi.org/10.1016/j.apcatb.2011.12.03410.1016/j.apcatb.2011.12.034 ↗
18. Luo M-F, Pu Z-Y, He M, Jin J, Jin L-Y (2006) Characterization of PdO/Ce0.8Y0.2O1.9 catalysts for carbon monoxide and methane oxidation. J Mol Catal A Chem 260(1–2):152–156. https://doi.org/10.1016/j.molcata.2006.07.02010.1016/j.molcata.2006.07.020 ↗
19. Slavinskaya EM, Gulyaev RV, Zadesenets AV, Stonkus OA, Zaikovskii VI, Shubin YV, Korenev SV, Boronin AI (2015) Low-temperature CO oxidation by Pd/CeO2 catalysts synthesized using the coprecipitation method. Appl Catal B Environ 166–167:91–103. https://doi.org/10.1016/j.apcatb.2014.11.01510.1016/j.apcatb.2014.11.015 ↗
20. Guo X, Meng M, Dai F, Li Q, Zhang Z, Jiang Z, Zhang S, Huang Y (2013) NOx-assisted soot combustion over dually substituted perovskite catalysts La1−xKxCo1−yPdyO3−δ. Appl Catal B Environ 142–143:278–289. https://doi.org/10.1016/j.apcatb.2013.05.03610.1016/j.apcatb.2013.05.036 ↗
21. Fang F, Feng N, Wang L, Meng J, Liu G, Zhao P, Gao P, Ding J, Wan H, Guan G (2018) Fabrication of perovskite-type macro/mesoporous La1−xKxFeO3−δ nanotubes as an efficient catalyst for soot combustion. Appl Catal B Environ 236:184–194. https://doi.org/10.1016/j.apcatb.2018.05.03010.1016/j.apcatb.2018.05.030 ↗
22. Satsuma A, Osaki K, Yanagihara M, Ohyama J, Shimizu K (2013) Activity controlling factors for low-temperature oxidation of CO over supported Pd catalysts. Appl Catal B Environ 132–133:511–518. https://doi.org/10.1016/j.apcatb.2012.12.02510.1016/j.apcatb.2012.12.025 ↗
23. Li Q, Xin Y, Zhang Z, Cao X (2018) Electron donation mechanism of superior Cs-supported oxides for catalytic soot combustion. Chem Eng J 337:654–660. https://doi.org/10.1016/j.cej.2017.12.14610.1016/j.cej.2017.12.146 ↗
24. Feng N, Meng J, Wu Y, Chen C, Wang L, Gao L, Wan H, Guan G (2016) KNO3 supported on three-dimensionally ordered macroporous La0.8Ce0.2Mn1−xFexO3 for soot removal. Catal Sci Technol 6(9):2930–2941. https://doi.org/10.1039/c5cy02025e10.1039/c5cy02025e ↗
25. Wang H, Liu Z, Ma Y, Julian K, Ji S, Linkov V, Wang R (2013) Synthesis of carbon-supported PdSn–SnO2 nanoparticles with different degrees of interfacial contact and enhanced catalytic activities for formic acid oxidation. Phys Chem Chem Phys 15(33):13999–14005. https://doi.org/10.1039/c3cp52101j10.1039/c3cp52101j ↗
26. Zhong L, Cai W, Yu Y, Zhong Q (2015) Insights into synergistic effect of chromium oxides and ceria supported on Ti-PILC for NO oxidation and their surface species study. Appl Surf Sci 325:52–63. https://doi.org/10.1016/j.apsusc.2014.11.02410.1016/j.apsusc.2014.11.024 ↗
27. Zhong L, Cai W, Zhong Q (2014) Evaluation of cerium modification over Cr/Ti-PILC for NO catalytic oxidation and their mechanism study. RSC Adv 4(82):43529–43537. https://doi.org/10.1039/c4ra05471g10.1039/c4ra05471g ↗
28. Huang F, Chen J, Hu W, Li G, Wu Y, Yuan S, Zhong L, Chen Y (2017) Pd or PdO: catalytic active site of methane oxidation operated close to stoichiometric air-to-fuel for natural gas vehicles. Appl Catal B Environ 219:73–81. https://doi.org/10.1016/j.apcatb.2017.07.03710.1016/j.apcatb.2017.07.037 ↗
29. Yan J, Wu G, Guan N, Li L, Li Z, Cao X (2013) Understanding the effect of surface/bulk defects on the photocatalytic activity of TiO2: anatase versus rutile. Phys Chem Chem Phys 15(26):10978–10988. https://doi.org/10.1039/c3cp50927c10.1039/c3cp50927c ↗
30. Chang H, Chen X, Li J, Ma L, Wang C, Liu C, Schwank JW, Hao J (2013) Improvement of activity and SO2 tolerance of Sn-modified MnOx–CeO2 catalysts for NH3-SCR at low temperatures. Environ Sci Technol 47(10):5294–5301. https://doi.org/10.1021/es304732h10.1021/es304732h ↗
31. Zhang P, Li R, Huang Y, Chen Q (2014) A novel approach for the in situ synthesis of Pt-Pd nanoalloys supported on Fe3O4@C core-shell nanoparticles with enhanced catalytic activity for reduction reactions. ACS Appl Mater Interfaces 6(4):2671–2678. https://doi.org/10.1021/am405167h10.1021/am405167h ↗
32. Colussi S, Trovarelli A, Vesselli E, Baraldi A, Comelli G, Groppi G, Llorca J (2010) Structure and morphology of Pd/Al2O3 and Pd/CeO2/Al2O3 combustion catalysts in Pd-PdO transformation hysteresis. Appl Catal A Gen 390(1–2):1–10. https://doi.org/10.1016/j.apcata.2010.09.03310.1016/j.apcata.2010.09.033 ↗
33. Dacquin J, Dujardin C, Granger P (2008) Surface reconstruction of supported Pd on LaCoO3: consequences on the catalytic properties in the decomposition of N2O. J Catal 253(1):37–49. https://doi.org/10.1016/j.jcat.2007.10.02310.1016/j.jcat.2007.10.023 ↗
34. Gulyaev RV, Slavinskaya EM, Novopashin SA, Smovzh DV, Zaikovskii AV, Osadchii DY, Bulavchenko OA, Korenev SV, Boronin AI (2014) Highly active PdCeOx composite catalysts for low-temperature CO oxidation, prepared by plasma-arc synthesis. Appl Catal B Environ 147:132–143. https://doi.org/10.1016/j.apcatb.2013.08.04310.1016/j.apcatb.2013.08.043 ↗
35. Xu X, Liu F, Tian J, Peng H, Liu W, Fang X, Zhang N, Wang X (2017) Modifying the surface of gamma-Al2O3 with Y2Sn2O7 pyrochlore: monolayer dispersion behaviour of composite oxides. ChemPhysChem 18(12):1533–1540. https://doi.org/10.1002/cphc.20170002910.1002/cphc.201700029 ↗
36. Zhao D, Gao Z, Xian H, Xing L, Yang Y, Tian Y, Ding T, Jiang Z, Zhang J, Zheng L, Li X (2018) Addition of Pd on La0.7Sr0.3CoO3 perovskite to enhance catalytic removal of NOx. Ind Eng Chem Res 57(2):521–531. https://doi.org/10.1021/acs.iecr.7b0439910.1021/acs.iecr.7b04399 ↗
37. Megarajan SK, Rayalu S, Nishibori M, Teraoka Y, Labhsetwar N (2014) Effects of surface and bulk silver on PrMnO3+δ perovskite for CO and soot oxidation: experimental evidence for the chemical state of silver. ACS Catal 5(1):301–309. https://doi.org/10.1021/cs500880w10.1021/cs500880w ↗
38. Zhou K, Chen H, Tian Q, Hao Z, Shen D, Xu X (2002) Pd-containing perovskite-type oxides used for three-way catalysts. J Mol Catal A Chem 189(2):225–23210.1016/S1381-1169(02)00177-2 ↗
39. Lopez-Gonzalez D, Couble J, Aouine M, Massin L, Mascunan P, Díez-Ramírez J, Klotz M, Tardivat C, Vernoux P (2016) Effect of the reduction step on the catalytic performance of Pd-CeMO2 based catalysts (M = Gd, Zr) for propane combustion. Topic Catal 59(17–18):1638–1650. https://doi.org/10.1007/s11244-016-0683-y10.1007/s11244-016-0683-y ↗
40. Wang Q, Li Z, Zhao B, Li G, Zhou R (2011) Effect of synthesis method on the properties of ceria-zirconia modified alumina and the catalytic performance of its supported Pd-only three-way catalyst. J Mol Catal A Chem 344(1):132–13710.1016/j.molcata.2011.05.011 ↗
41. Franchini CA, Cesar DV, Schmal M (2010) The interaction of oxides of the Pd/Ce/Zr/Al2O3 catalysts prepared by impregnation over alumina and promoting effects on surface properties. Catal Lett 137(1–2):45–54. https://doi.org/10.1007/s10562-010-0338-810.1007/s10562-010-0338-8 ↗
42. Mulla S, Chen N, Cumaranatunge L, Blau G, Zemlyanov D, Delgass W, Epling W, Ribeiro F (2006) Reaction of NO and O2 to NO2 on Pt: kinetics and catalyst deactivation. J Catal 241(2):389–399. https://doi.org/10.1016/j.jcat.2006.05.01610.1016/j.jcat.2006.05.016 ↗
43. Hwang J, Rao RR, Giordano L, Katayama Y, Yu Y, Shao-Horn Y (2017) Perovskites in catalysis and electrocatalysis. Science 358(6364):751–75610.1126/science.aam7092 ↗
44. Zhang Z, Zhang Y, Wang Z, Gao X (2010) Catalytic performance and mechanism of potassium-promoted Mg–Al hydrotalcite mixed oxides for soot combustion with O2. J Catal 271(1):12–21. https://doi.org/10.1016/j.jcat.2010.01.02210.1016/j.jcat.2010.01.022 ↗
45. Modeshia DR, Walton RI (2010) ChemInform Abstract: Solvothermal synthesis of perovskites and pyrochlores: crystallization of functional oxides under mild conditions. Chem Soc Rev 39(11):4303–432510.1039/b904702f ↗
46. Liu S, Wu X, Liu W, Chen W, Ran R, Li M, Weng D (2016) Soot oxidation over CeO2 and Ag/CeO2: factors determining the catalyst activity and stability during reaction. J Catal 337:188–19810.1016/j.jcat.2016.01.019 ↗
47. Zhan Z, Song L, Liu X, Jiao J, Li J, Hong H (2014) Effects of synthesis methods on the performance of Pt + Rh/Ce0.6Zr0.4O2 three-way catalysts. J Environ Sci 26(3):683–69310.1016/S1001-0742(13)60444-1 ↗
48. Dutta G, Waghmare UV, Baidya T, Hegde MS (2007) Hydrogen spillover on CeO2/Pt: enhanced storage of active hydrogen. Chem Mater 19(26):6430–643610.1021/cm071330m ↗
49. Zhu J, Li H, Zhong L, Xiao P, Xu X, Yang X, Zhao Z, Li J (2014) Perovskite oxides: preparation, characterizations, and applications in heterogeneous catalysis. ACS Catal 4:2917–294010.1021/cs500606g ↗
50. Russo N, Furfori S, Fino D, Saracco G, Specchia V (2008) Lanthanum cobaltite catalysts for diesel soot combustion. Appl Catal B Environ 83(1):85–9510.1016/j.apcatb.2008.02.006 ↗
51. Durgasri DN, Vinodkumar T, Lin F, Alxneit I, Reddy BM (2014) Gadolinium doped cerium oxide for soot oxidation: influence of interfacial metal-support interactions. Appl Surf Sci 314:592–598. https://doi.org/10.1016/j.apsusc.2014.07.03610.1016/j.apsusc.2014.07.036 ↗
52. Wei Y, Liu J, Zhao Z, Duan A, Jiang G (2012) The catalysts of three-dimensionally ordered macroporous Ce1−xZrxO2-supported gold nanoparticles for soot combustion: the metal-support interaction. J Catal 287:13–29. https://doi.org/10.1016/j.jcat.2011.11.00610.1016/j.jcat.2011.11.006 ↗
53. Andana T, Piumetti M, Bensaid S, Veyre L, Thieuleux C, Russo N, Fino D, Quadrelli EA, Pirone R (2018) Nanostructured equimolar ceria-praseodymia for NOx-assisted soot oxidation: insight into Pr dominance over Pt nanoparticles and metal-support interaction. Appl Catal B Environ 226:147–161. https://doi.org/10.1016/j.apcatb.2017.12.04810.1016/j.apcatb.2017.12.048 ↗