Production, properties and application prospects of bulk nanostructured materials
Source abstract
Abstract
Fundamental mechanisms of grain refinement during equal-channel angular pressing (ECAP) and multiple isothermal forging (MIF) are analyzed and compared. Based on this analysis, deformation methods of nanostructuring are classified into severe plastic deformation and mild plastic deformation methods. It is demonstrated that MIF is a versatile method allowing for a production of bulk and sheet nanostructured semi-products with grain size down to 50 nm and applicable to various metals and alloys. Novel mechanical properties of bulk nanostructured materials produced by this method are presented. The ways of their structural and functional applications are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Altan BS (ed) (2006) Severe plastic deformation: toward bulk production of nanostructured materials. Nova Science, New York
2. Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Prog Mater Sci 45:10310.1016/S0079-6425(99)00007-9 ↗
3. Valiev RZ, Langdon TG (2006) Progr Mater Sci 51:88110.1016/j.pmatsci.2006.02.003 ↗
4. Valiakhmetov OR, Galeev RM, Salishchev GA (1990) Phys Met Metallogr 72:204
5. Imayev RM, Imayev VM (1991) Scr Metall Mater 25:204110.1016/0956-716X(91)90271-2 ↗
6. Salishchev GA, Valiakhmetov OR, Galeev RM (1993) J Mater Sci 28:2898. doi:https://doi.org/10.1007/BF0035469210.1007/BF00354692 ↗
7. Imayev RM, Imayev VM, Salishchev GA (1992) J Mater Sci 27:4465. doi:https://doi.org/10.1007/BF0054158010.1007/BF00541580 ↗
8. Rybin VV (1986) Large plastic strains and fracture of metals. Metallurgiya Publishers, Moscow (in Russian)
9. Hansen N, Jensen DJ (1999) Philos Trans R Soc Lond A 357:144710.1098/rsta.1999.0384 ↗
10. Iwahashi Y, Horita Z, Nemoto M, Langdon TG (1998) Acta Mater 46:331710.1016/S1359-6454(97)00494-1 ↗
11. Gholinia A, Prangnell PB, Markushev MV (2000) Acta Mater 48:111510.1016/S1359-6454(99)00388-2 ↗
12. Driver JH (2004) Scr Mater 51:81910.1016/j.scriptamat.2004.05.014 ↗
13. Huang WH, Yu CY, Kao PW, Chang CP (2004) Mater Sci Eng A 366:22110.1016/j.msea.2003.08.033 ↗
14. Kaibyshev OA (1992) Superplasticity of alloys, intermetallics and ceramics. Springer-Verlag, Berlin10.1007/978-3-642-84673-1 ↗
15. Zherebtsov SV, Salishchev GA, Galeyev RM, Valiakhmetov OR, Mironov SY, Semiatin SL (2004) Scr Mater 51:114710.1016/j.scriptamat.2004.08.018 ↗
16. Poirier JP (1976) Plasticité à haute temperature des solids cristallins. Eyrolles, Paris
17. Galeev RM, Valiakhmetov OR, Salishchev GA (1990) Russian Metall 4:97
18. Salishchev G, Zaripova R, Galeev R, Valiakhmetov O (1995) NanoStr Mater 6:91310.1016/0965-9773(95)00208-1 ↗
19. Salishchev GA, Valiakhmetov OR, Galeev RM, Malysheva SP (1996) Russian Metall 4:86
20. Zherebtsov SV, Galeev RM, Salishchev GA, Myshlaev MM (1999) Phys Met Metallogr 87(4):66
21. Valitov VA, Salishchev GA, Mukhtarov ShKh (1994) Russian Metall 3:127
22. Valitov VA, Kaibyshev OA, Mukhtarov ShKh, Gajnutdinova NR (2001) In: Gottstein G, Molodov DA (eds) Recrystallization and grain growth, vol 1. Springer-Verlag, Berlin, p 563
23. Valitov VA, Mukhtarov ShKh, YuA Raskulova (2004) Phys Metals Metallogr 102(1):9710.1134/S0031918X06070143 ↗
24. Imayev R, Shagiev M, Salishchev G, Imayev V, Valitov V (1996) Scripta Mater 34:98510.1016/1359-6462(95)00604-4 ↗
25. Zherebtsov SV, Salishchev GA, Galeyev RM, Valiakhmetov OR, Mironov SY, Chen TF (2004) Scripta Mater 51:114710.1016/j.scriptamat.2004.08.018 ↗
26. Valiev RZ, Alexandrov IV (2007) Bulk nanostructured materials. Academkniga, Moscow
27. Salishchev GA, Galeev RM, Malysheva SP, Valiakhmetov OR (1997) Mater Sci Forum 243–245:585
28. Salishchev GA, Valiakhmetov OR, Galeyev RM, Froes FH (2004) In: Lutjering G, Albrecht O (eds) Ti-2003, science and technology, vol 2. Wiley-VCH Verlag, Weinheim, p 569
29. Lutfullin RR, Kaibyshev OA, Valiakhmetov OP, Mukhametrakhimov MKh, Safiullin RV, Mulyukov RR (2003) J Adv Mater 4:21 (in Russian)