Influence of lubricant filling on the dry sliding wear behaviors of hybrid PTFE/Nomex fabric composite
Source abstract
Abstract
To improve the antiwear property and load carrying capacity of hybrid PTFE/Nomex fabric/phenolic composites, graphene and graphene oxide (GO) had been synthesized and were employed as fillers, together with graphite. Sliding wear tests show that the wear rates of filler-reinforced PTFE/Nomex fabric composites were reduced greatly when compared to unfilled fabric composite. Besides, it was found that the 2 wt% GO filled PTFE/Nomex fabric composites exhibited the optimal tribological properties. It was proposed that the self-lubrication of GO, the favorable interface stability of the composite, and the uniform transfer film on the counterpart pin contributed together to the reinforced tribological property of GO filled PTFE/Nomex fabric composite. We also investigated the influence of filler content, applied load, sliding speed, and tensile and bonding strength on the tribological properties of PTFE/Nomex fabric composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Sarasini F, Tirillò J, Valente M, Valente T, Cioffi S, Iannace S, Sorrentino L (2013) Effect of basalt fiber hybridization on the impact behavior under low impact velocity of glass/basalt woven fabric/epoxy resin composites. Composites A 47:109–12310.1016/j.compositesa.2012.11.021 ↗
2. Thanomsilp C, Hogg PJ (2009) Penetration impact resistance of hybrid composites based on commingled yarn fabrics. Compos Sci Technol 63:467–48210.1016/S0266-3538(02)00233-6 ↗
3. Wan YZ, Huang Y, He F, Li QY, Lian JJ (2007) Tribological properties of three-dimensional braided carbon/Kevlar/epoxy hybrid composites under dry and lubricated conditions. Mater Sci Eng A 452–453:202–20910.1016/j.msea.2006.11.090 ↗
4. Xiang DH, Shu WC, Li K (2008) Friction and wear behavior of a new 40Cr steel–PTFE fabric composite under heavy loads. Mater Sci Eng A 483–484:365–36810.1016/j.msea.2006.08.147 ↗
5. Villar-Rodil S, Paredes JI, Martínez-Alonso A, Tascón JMD (2001) Atomic force microscopy and infrared spectroscopy studies of the thermal degradation of Nomex aramid fibers. Chem Mater 13:4297–430410.1021/cm001219f ↗
6. Khedkar J, Negulescu I, Meletis EI (2002) Sliding wear behavior of PTFE composites. Wear 252:361–36910.1016/S0043-1648(01)00859-6 ↗
7. Aderikha VN, Shapovalov VA (2011) Mechanical and tribological behavior of PTFE–polyoxadiazole fiber composites. Effect of filler treatment. Wear 271:970–97610.1016/j.wear.2011.04.011 ↗
8. Leal AA, Deitzel JM, McKnight SH, Gillespie JW Jr (2009) Interfacial behavior of high performance organic fibers. Polymer 50:1228–123510.1016/j.polymer.2009.01.018 ↗
9. Shivamurthy B, Bhat KU, Anandhan S (2013) Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites. Mater Des 44:136–14310.1016/j.matdes.2012.07.059 ↗
10. Sharma M, Bijwe J (2012) Surface designing of carbon fabric polymer composites with nano and micron sized PTFE particles. J Mater Sci 47:4928–4935. doi: 10.1007/s10853-012-6367-510.1007/s10853-012-6367-5 ↗
11. Liu P, Huang T, Lu RG, Li TS (2012) Tribological properties of modified carbon fabric/polytetrafluoroethylene composites. Wear 289:17–2510.1016/j.wear.2012.04.021 ↗
12. Sharma M, Bijwe J (2012) Influence of molecular weight on performance properties of polyethersulphone and its composites with carbon fabric. Wear 274–275:388–39410.1016/j.wear.2011.10.004 ↗
13. Zhang XR, Pei XQ, Zhang JP, Wang QH (2009) Effects of carbon fiber surface treatment on the friction and wear behavior of 2D woven carbon fabric/phenolic composites. Colloids Surf A 339:7–1210.1016/j.colsurfa.2009.01.005 ↗
14. Zhang HJ, Zhang ZZ, Guo F (2010) A study on the sliding wear of hybrid PTFE/Kevlar fabric/phenolic composites filled with nanoparticles of TiO2 and SiO2. Tribol Trans 53:678–68310.1080/10402001003672228 ↗
15. Zhang HJ, Zhang ZZ, Guo F (2012) Tribological behaviors of hybrid PTFE/Nomex fabric/phenolic composite reinforced with multiwalled carbon nanotubes. J Appl Polym Sci 124:235–24110.1002/app.33594 ↗
16. Shen XJ, Pei XQ, Fu SY, Friedrich K (2013) Significantly modified tribological performance of epoxy nanocomposites at very low graphene oxide content. Polymer 54:1234–124210.1016/j.polymer.2012.12.064 ↗
17. Ren GN, Zhang ZZ, Zhu XT, Ge B, Guo F, Men XH, Liu WM (2013) Influence of functional graphene as filler on the tribological behaviors of Nomex fabric/phenolic composite. Composites A 49:157–16410.1016/j.compositesa.2013.03.001 ↗
18. Compton OC, Nguyen ST (2010) Graphene oxide, highly reduced graphene oxide, and graphene: versatile building blocks for carbon-based materials. Small 6:711–72310.1002/smll.200901934 ↗
19. Wan CY, Chen BQ (2012) Reinforcement and interphase of polymer/graphene oxide nanocomposites. J Mater Chem 22:3637–364610.1039/c2jm15062j ↗
20. Hummers WS, Offeman RE (1958) Preparation of graphitic oxide. J Am Chem Soc 80:133910.1021/ja01539a017 ↗
21. Xu YX, Bai H, Lu GW, Li C, Shi GQ (2008) Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets. J Am Chem Soc 130:5856–585710.1021/ja800745y ↗
22. Guo F, Zhang ZZ, Zhang HJ, Liu WM (2009) Effect of air plasma treatment on mechanical and tribological properties of PBO fabric composites. Composites A 40:1305–131010.1016/j.compositesa.2009.06.001 ↗
23. Hsiao MC, Liao SH, Yen MY, Liu PI, Pu NW, Wang CA, Ma CC (2010) Preparation of covalently functionalized graphene using residual oxygen-containing functional groups. ASC Appl Mater interfaces 2(11):3092–309910.1021/am100597d ↗
24. Gao HJ, Zhang SH, Lu F, Jia H, Zheng LQ (2012) Aqueous dispersion of graphene sheets stabilized by ionic liquid-based polyether. Colloid Polym Sci 290:1785–179110.1007/s00396-012-2720-0 ↗
25. Gonçalves G, Marques PAAP, Barros-Timmons A, Bdkin I, Singh MK, Emami N, Grácio J (2010) Graphene oxide modified with PMMA via ATRP as a reinforcement filler. J Mater Chem 20:9927–993410.1039/c0jm01674h ↗
26. Liu P, Lu RG, Wang HY, Huang T, Li TS (2012) The mechanical and tribological properties of aramid (Twaron) fabric/polytetrafluoroethylene composites. J Macromol Sci Phys 51:1693–170410.1080/00222348.2012.657582 ↗
27. Zhang XR, Pei XQ, Wang QH (2011) Study on the friction and wear behavior of surface-modified carbon nanotube filled carbon fabric composites. Polym Adv Technol 22:2157–216510.1002/pat.1739 ↗
28. Li YQ, Wang QH, Wang TM, Pan GQ (2012) Preparation and tribological properties of graphene oxide/nitrile rubber nanocomposites. J Mater Sci 47:730–738. doi: 10.1007/s10853-011-5846-410.1007/s10853-011-5846-4 ↗
29. Su FH, Zhang ZZ, Guo F, Song HJ, Liu WM (2006) Tribological properties of the composites made of pure and plasma treated-Nomex fabrics. Wear 261:293–30010.1016/j.wear.2005.10.010 ↗