Low-temperature processing of porous SiC ceramics

Porous silicon carbide ceramics were fabricated from SiC, polysiloxane, and polymer microbead (as a pore former) at a temperature as low as 800 °C by a simple pressing and heat-treatment process. The effects of polysiloxane and template contents on the porosity and strength of the ceramics were investigated. During heat treatment, the polysiloxane transformed to an amorphous SiOC phase, which acted as the bonding material between SiC particles, and the polymer microbeads decomposed into gases and left pores. The porosity of porous SiC ceramics could be controlled within a range of 26–56 % with the present set of processing variables. The porous SiC ceramics showed a maximal porosity of 56 % when 10 μm SiC particles and 16 % polysiloxane were used with 20 % polymer microbeads. Flexural strength generally increased with increasing polysiloxane content and decreased with increasing polymer microbead content. Typical flexural strength of the porous SiC ceramics was 53 MPa at 42 % porosity.