The effect of strontium (Sr) on the ignition temperature of magnesium (Mg): a look at the pre-ignition stage of Mg–6 wt% Sr
Source abstract
Abstract
The effect of strontium (Sr) addition on the ignition and oxidation behavior of magnesium has been investigated. Continuous heating experiments carried out in dry air-flow reveal that the ignition temperature (Ti) is raised from 640 °C (of pure Mg) to up to 854 °C at 6 wt% Sr addition. The oxidation behavior of Sr containing alloys was investigated during (i) isothermal oxidation experiments above the liquidus temperature (~640 °C) and (ii) during pre-ignition heating to 700 °C. The change in the ignition temperature of various alloy compositions is related to the amount of Sr that can be segregated to the surface and to the activity of the elements in the surface in the stages prior to ignition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · High-Temperature Coating Behaviors · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Luo A, Pekguleryuz MO (1994) J Mater Sci 29:5259. doi: 10.1007/BF0117153410.1007/BF01171534 ↗
2. Kainer KU, Buch F (2003) The current state of technology and potential for further development of magnesium applications, magnesium alloys and technology. Wiley, Weinheim, p 1
3. Song G (2005) Adv Eng Mater 7:56310.1002/adem.200500013 ↗
4. You BS, Park WW, Chung IS (2000) Scripta Mater 42:108910.1016/S1359-6462(00)00344-4 ↗
5. Liu JR, Chen HK, Zhao L, Huang WD (2009) Corros Sci 51:12910.1016/j.corsci.2008.10.011 ↗
6. Shih TS, Liu JB, Wei PS (2007) Mater Chem Phys 104:49710.1016/j.matchemphys.2007.04.010 ↗
7. Czerwinski F (2002) Acta Mater 50:263910.1016/S1359-6454(02)00094-0 ↗
8. Tim M (2010) FAA overview on testing of magnesium alloys for use in an aircraft cabin, FAA 6th Triennial Cabin and Fire Safety Conference, Atlantic City
9. Alfons S (2010) Potential for magnesium in aircraft seats, FAA 6th Triennial Cabin and Fire Safety Conference, Atlantic City
10. Bruce G (2010). In: S. R. Agnew, N. R. Neelameggham, E. A. Nyberg, W. H. Sillekens (eds) Magnesium technology 2010, p 13
11. Czerwinski F (2004) Corros Sci 46:37710.1016/S0010-938X(03)00151-3 ↗
12. Foerster G (1998) Adv Mater Process 154(4):79
13. Pekguleryuz M (2006) Magnesium technology: Metallurgy, design, applications. In: Horst E. Friedrich, Barry L. Mordike (eds). Springer, Berlin, p 109–143
14. Zeng XQ, Wang QD, Lu YZ, Ding WJ, Lu C, Zhu YP, Zhai CQ, Xu XP (2000) Scripta Mater 43:40310.1016/S1359-6462(00)00440-1 ↗
15. Weimin Z, Yong S, Haipeng L, Chunyong L (2006) Mater Sci Eng B 127:10510.1016/j.mseb.2005.09.064 ↗
16. Vainio H, Rice JM (1997) J Occup Env Med 39(3):20310.1097/00043764-199703000-00008 ↗
17. Seong-Ho H, Jin-Kyu L, Hyung-Ho J, Seung-Boo J, Kim KS (2006) Rare Met 25:150
18. Sakamoto M, Akiyama S, Ogi K (1997) J Mater Sci Lett 16:104810.1023/A:1018526708423 ↗
19. Byung-Ho C, Bong-Sun Y, Won-Wook P, Yan-Bin H, Ik-Min P (2003) Met Mater Int 9(4):39510.1007/BF03027194 ↗
20. Ravi Kumar NV, Blandin JJ, Suéry M, Grosjean E (2003) Scripta Mater 49:22510.1016/S1359-6462(03)00263-X ↗
21. Prasad A, Shi Z, Atrens A (2012) Corros Sci 55:15310.1016/j.corsci.2011.10.014 ↗
22. Prasad A, Shi Z, Atrens A (2012) Adv Eng Mater 14:77210.1002/adem.201200124 ↗
23. Fan JF (2004) J Mater Sci 39:6375. doi: 10.1023/B:JMSC.0000043613.94027.0410.1023/B:JMSC.0000043613.94027.04 ↗
24. Fan JF (2005) Metall Mater Trans A 36A:23510.1007/s11661-005-0155-7 ↗
25. Fan JF, Yang GC, Zhou YH, Wei YH, Xu BS (2009) Metall Mater Trans A 40A:218410.1007/s11661-009-9874-5 ↗
26. Wagner C (1965) Corros Sci 5:75110.1016/S0010-938X(65)80003-8 ↗
27. Xiankuo M, Weimin Z, Jian D (2012) Adv Mat Res 418–420:383
28. Pekguleryuz MO, Avedesian MM (1992) In: Hehman F, Mordike BL (eds) Magnesium alloying—Some metallurgical aspects, magnesium alloys & their applications. DGM, Germany, p 213
29. Sahoo P, Debroy T, Mcnallan MJ (1988) Metall Trans B 19B:48310.1007/BF02657748 ↗
30. Yamauchi H (1985) Phy Rev B 31:766810.1103/PhysRevB.31.7688 ↗
31. Kiejna A, Wojciechowski F (1983) J Phys C Solid Slate Phys 16:688310.1088/0022-3719/16/35/018 ↗
32. Kiejna A (1990) J Phys: Condens Matter 2:633110.1088/0953-8984/2/29/012 ↗
33. Ogino K, Nogi K, Yamase O (1983) Transactions ISIJ 23:23510.2355/isijinternational1966.23.234 ↗
34. Khanna KN (1981) Phys Stat Sol (b) 106:48510.1002/pssb.2221050206 ↗
35. Gopala Rao RV, Bandyopadhyay U (1995) J Mater Sci 30:1065. doi: 10.1007/BF0117844610.1007/BF01178446 ↗
36. Kubota Y, Escano MCS, Nakanishi H, Kasai H (2008) J Alloys Compd 458:15110.1016/j.jallcom.2007.04.097 ↗
37. Madjet ME, Hervieux PA, Gross DHE, Schapiro O (1997) Z Phys D 39:30910.1007/s004600050141 ↗
38. Hjelmberg H (1979) Surf Sci 81:53910.1016/0039-6028(79)90119-5 ↗
39. Daniuk S, Jarlborg T, Kontrym-Sznajd G, Majsnerowski J, Stachowiak H (1989) J Phys: Condens Matter l:839710.1088/0953-8984/1/44/011 ↗
40. Fang CM, Kools F, Metselaar R, de With G, de Groot RA (2003) J Phys: Condens Matter 15:622910.1088/0953-8984/15/36/311 ↗
41. Koch E (1996) Phys Rev Lett 76:267810.1103/PhysRevLett.76.2678 ↗
42. Kubichek L, Mal’tsev MB (1959) Otdel Tekh Nauk Met I Toplivo 3:144
43. Turkdogan ET (1980) Physical chemistry of high temperature technology. Academic Press Inc, New York
44. Pekguleryuz M, Vermette P (2004) Strontium for melt oxidation reduction of magnesium and a method for adding strontium to magnesium. US Patent Application 20040159188
45. Nayeb-Hashemi AA, Clark JB (1986) Bull Alloy Phase Diagr 72:14910.1007/BF02881554 ↗
46. Bale C, Belisle E, Chartrand P, Decterov S, Eriksson G, Hack K, Jung I-H, Kang Y-B, Melancon J, Pelton A, Robelin C, Petersen S (2009) Calphad 33(2):29510.1016/j.calphad.2008.09.009 ↗
47. Medved J, Mrvar P, Voncina M (2009) Oxid Met 71:25710.1007/s11085-009-9141-6 ↗
48. Kim YM, Yim CD, Kim HS, You BS (2011) Scripta Mater 65:95810.1016/j.scriptamat.2011.08.019 ↗
49. Aydin DS, Bayindir Z, Hoseini M, Pekguleryuz MO (2013) J Alloy Comp 569:3510.1016/j.jallcom.2013.03.130 ↗
50. Tim M (2011) International Aircraft Materials Fire Test Working Group Meeting, FAA Technical Center
51. Liu M, Shih DS, Parish C, Atrens A (2012) Corros Sci 54:13910.1016/j.corsci.2011.09.004 ↗
52. Takeno T, Yuasa S (1980) Combust Sci Technol 21(3–4):10910.1080/00102208008946924 ↗
53. Abbud-Madrid A (1990) Dissertation, Princeton University
54. Tolpygo VK, Clarke DR (1998) Acta Mater 46(14):515310.1016/S1359-6454(98)00133-5 ↗
55. Clarke DR (2002) Curr Opin Solid State Mater Sci 6:23710.1016/S1359-0286(02)00074-8 ↗
56. Lin PY, Zhou H, Li W, Li WP, Sun N, Yang R (2008) Corros Sci 50:266910.1016/j.corsci.2008.06.025 ↗
57. Kofstad P (1988) High temperature corrosion. Elsevier Applied Science, New York
58. de Noirfontaine MN, Baldinozzi G, Barthe′s-Labrousse MG, Kusinski J, Boe¨mare G, Herinx M, Feuerbacher M (2010) Oxid Met 73:21910.1007/s11085-009-9176-8 ↗
59. Van Dovern H, Verhoeven Th JA (1980) J Electron Spectrosc Relat Phenom 21:26510.1016/0368-2048(80)85055-9 ↗
60. Vasquez RP (1991) J Electron Spectrosc Relat Phenom 56:21710.1016/0368-2048(91)85005-E ↗
61. Bobryshev BL, Aleksandrova YP (1988) Metallov Term Obr Metal 3:41
62. Rahmel A, Spencer PJ (1991) Oxid Metal 35(1/2):5310.1007/BF00666500 ↗
63. Kofstad P (1976) Reactions at surfaces and interfaces—gas–metal interactions at high temperatures, 8th International symposium on the reactivity of solids. Chalmers University of Technology, Goteborg, p 15
64. Van Orman JA, Katherine LC (2010) Rev Mineral Geochem 72:75710.2138/rmg.2010.72.17 ↗
65. Kumar A, Rafiquea SM, Jha N (2006) Phys B 373:16910.1016/j.physb.2005.11.142 ↗
66. Chunhua X, Wei G (2000) Mater Res Innov 3:23110.1007/s100190050008 ↗
67. ASM Handbook (1990) Corrosion: Fundamentals, Testing and Protection 13A. In: Stephen DC, Bernard SC, Jr (eds)
68. Meier GH, Petit FS (1992) Mater Sci Technol 8(4):33110.1179/026708392790170865 ↗
69. Keene BJ (1988) Int Mater Rev 33(1):110.1179/095066088790324139 ↗