Facile fabrication of mechanically stable non-iridescent structural color coatings
Source abstract
Abstract
The application of structural color materials is usually blocked by their iridescence, tendency to cracking and feeble mechanical properties. In this work, mechanically stable non-iridescent structural color coatings have been fabricated by the co-assembly of polydopamine-coated polystyrene nanoparticles (PS@PDA NPs) and chitosan (CS). The introduction of CS into the PS@PDA NPs assembly system greatly restrained the generation of cracks and enhanced the mechanical stability of the structural color coatings, which could be resisted finger wiping test and ultrasonic treatment. Importantly, these coatings applied not only onto smooth hard substrates that exhibited remarkable adhesion ability but also onto flexible cotton fabrics that presented robust mechanical stability and high color visibility. This work provides a facile strategy to fabricate mechanically stable non-iridescent structural color coatings with high color visibility for pervasive applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Polydiacetylene-based materials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Takeoka Y, Honda M, Seki T, Ishii M, Nakamura H (2009) Structural colored liquid membrane without angle dependence. ACS Appl Mater Interfaces 1(5):982–986. https://doi.org/10.1021/am900074v10.1021/am900074v ↗
2. Kinoshita S, Yoshioka S, Miyazaki J (2008) Physics of structural colors. Rep Progress Phys. https://doi.org/10.1088/0034-4885/71/7/07640110.1088/0034-4885/71/7/076401 ↗
3. Shang L, Zhang W, Xu K, Zhao Y (2019) Bio-inspired intelligent structural color materials. Mater Horizons. https://doi.org/10.1039/c9mh00101h10.1039/c9mh00101h ↗
4. Ge J, Yin Y (2011) Responsive photonic crystals. Angew Chem Int Ed Engl 50(7):1492–1522. https://doi.org/10.1002/anie.20090709110.1002/anie.200907091 ↗
5. Liu P, Bai L, Yang J, Gu H, Zhong Q, Xie Z, Gu Z (2019) Self-assembled colloidal arrays for structural color. Nanoscale Adv 1(5):1672–1685. https://doi.org/10.1039/c8na00328a10.1039/c8na00328a ↗
6. Cong H, Yu B, Tang J, Li Z, Liu X (2013) Current status and future developments in preparation and application of colloidal crystals. Chem Soc Rev 42(19):7774–7800. https://doi.org/10.1039/c3cs60078e10.1039/c3cs60078e ↗
7. Bai L, Mai VC, Lim Y, Hou S, Mohwald H, Duan H (2018) Large-scale noniridescent structural color printing enabled by infiltration-driven nonequilibrium colloidal assembly. Adv Mater. https://doi.org/10.1002/adma.20170566710.1002/adma.201705667 ↗
8. Hou J, Zhang H, Yang Q, Li M, Jiang L, Song Y (2015) Hydrophilic-hydrophobic patterned molecularly imprinted photonic crystal sensors for high-sensitive colorimetric detection of tetracycline. Small 11(23):2738–2742. https://doi.org/10.1002/smll.20140364010.1002/smll.201403640 ↗
9. Zhang Y, Han P, Zhou H, Wu N, Wei Y, Yao X, Zhou J, Song Y (2018) Highly brilliant noniridescent structural colors enabled by graphene nanosheets containing graphene quantum dots. Adv Funct Mater 28(29):15. https://doi.org/10.1002/adfm.20180258510.1002/adfm.201802585 ↗
10. Xiao M, Hu Z, Wang Z, Li Y, Tormo AD, Le Thomas N, Wang B, Gianneschi NC, Shawkey MD, Dhinojwala AJSa (2017) Bioinspired bright noniridescent photonic melanin supraballs. Sci Adv 3(9):e1701151. https://doi.org/10.1126/sciadv.170115110.1126/sciadv.1701151 ↗
11. Kuang M, Wang L, Song Y (2014) Controllable printing droplets for high-resolution patterns. Adv Mater 26(40):6950–6958. https://doi.org/10.1002/adma.20130541610.1002/adma.201305416 ↗
12. Zhang J, Zhu Z, Yu Z, Ling L, Wang C-F, Chen S (2019) Large-scale colloidal films with robust structural colors. Mater Horizons 6(1):90–96. https://doi.org/10.1039/c8mh00248g10.1039/c8mh00248g ↗
13. Yavuz G, Zille A, Seventekin N, Souto AP (2018) Structural coloration of chitosan coated cellulose fabrics by electrostatic self-assembled poly (styrene-methyl methacrylate-acrylic acid) photonic crystals. Carbohydr Polym 193:343–352. https://doi.org/10.1016/j.carbpol.2018.03.08410.1016/j.carbpol.2018.03.084 ↗
14. Liu G, Guo Y, Zhou L, Wu Y, Chen M, He Z (2019) Tough, structurally colored fabrics produced by photopolymerization. J Mater Sci 54(15):10929–10940. https://doi.org/10.1007/s10853-019-03594-610.1007/s10853-019-03594-6 ↗
15. Edagawa K, Kanoko S, Notomi M (2008) Photonic amorphous diamond structure with a 3D photonic band gap. Phys Rev Lett 100(1):013901. https://doi.org/10.1103/PhysRevLett.100.01390110.1103/PhysRevLett.100.013901 ↗
16. Harun-Ur-Rashid M, Bin Imran A, Seki T, Ishii M, Nakamura H, Takeoka Y (2010) Angle-independent structural color in colloidal amorphous arrays. ChemPhysChem 11(3):579–583. https://doi.org/10.1002/cphc.20090086910.1002/cphc.200900869 ↗
17. Kohri M, Nannichi Y, Taniguchi T, Kishikawa K (2015) Biomimetic non-iridescent structural color materials from polydopamine black particles that mimic melanin granules. J Mater Chem C 3(4):720–724. https://doi.org/10.1039/c4tc02383h10.1039/c4tc02383h ↗
18. Yi B, Shen H (2018) Structurally colored films with superhydrophobicity and wide viewing angles based on bumpy melanin-like particles. Appl Surf Sci 427:1129–1136. https://doi.org/10.1016/j.apsusc.2017.09.09110.1016/j.apsusc.2017.09.091 ↗
19. Kawamura A, Kohri M, Yoshioka S, Taniguchi T, Kishikawa K (2017) Structural color tuning: mixing melanin-like particles with different diameters to create neutral colors. Langmuir 33(15):3824–3830. https://doi.org/10.1021/acs.langmuir.7b0070710.1021/acs.langmuir.7b00707 ↗
20. Takeoka Y, Yoshioka S, Takano A, Arai S, Nueangnoraj K, Nishihara H, Teshima M, Ohtsuka Y, Seki T (2013) Production of colored pigments with amorphous arrays of black and white colloidal particles. Angew Chem Int Ed Engl 52(28):7261–7265. https://doi.org/10.1002/anie.20130132110.1002/anie.201301321 ↗
21. Zeng Q, Ding C, Li Q, Yuan W, Peng Y, Hu J, Zhang K-Q (2017) Rapid fabrication of robust, washable, self-healing superhydrophobic fabrics with non-iridescent structural color by facile spray coating. RSC Adv 7(14):8443–8452. https://doi.org/10.1039/c6ra26526j10.1039/c6ra26526j ↗
22. Song L, Chen X, Xie Y, Zhong L, Zhang X, Cheng Z (2019) Non-iridescent, crack-free, conductive structural colors enhanced by flexible nanosheets of reduced graphene oxide. Dyes Pigm 164:222–226. https://doi.org/10.1016/j.dyepig.2019.01.03710.1016/j.dyepig.2019.01.037 ↗
23. Liu P, Chen J, Zhang Z, Xie Z, Du X, Gu Z (2018) Bio-inspired robust non-iridescent structural color with self-adhesive amorphous colloidal particle arrays. Nanoscale 10(8):3673–3679. https://doi.org/10.1039/c7nr08056e10.1039/c7nr08056e ↗
24. Li Q, Zhang Y, Shi L, Qiu H, Zhang S, Qi N, Hu J, Yuan W, Zhang X, Zhang KQ (2018) Additive mixing and conformal coating of noniridescent structural colors with robust mechanical properties fabricated by atomization deposition. ACS Nano 12(4):3095–3102. https://doi.org/10.1021/acsnano.7b0825910.1021/acsnano.7b08259 ↗
25. Meng F, Umair MM, Iqbal K, Jin X, Zhang S, Tang B (2019) Rapid fabrication of noniridescent structural color coatings with high color visibility, good structural stability, and self-healing properties. ACS Appl Mater Interfaces 11(13):13022–13028. https://doi.org/10.1021/acsami.9b0152210.1021/acsami.9b01522 ↗
26. Zhang X, Wang F, Wang L, Lin Y, Zhu J (2016) Brilliant structurally colored films with invariable stop-band and enhanced mechanical robustness inspired by the cobbled road. ACS Appl Mater Interfaces 8(34):22585–22592. https://doi.org/10.1021/acsami.6b0757610.1021/acsami.6b07576 ↗
27. Chen M, Tian Y, Zhang J, Hong R, Chen L, Chen S, Son DY (2016) Fabrication of crack-free photonic crystal films via coordination of microsphere terminated dendrimers and their performance in invisible patterned photonic displays. J Mater Chem C 4(37):8765–8771. https://doi.org/10.1039/c6tc02697d10.1039/c6tc02697d ↗
28. Yi B, Shen H (2017) Facile fabrication of crack-free photonic crystals with enhanced color contrast and low angle dependence. J Mater Chem C 5(32):8194–8200. https://doi.org/10.1039/c7tc01549f10.1039/c7tc01549f ↗
29. Rinaudo M (2006) Chitin and chitosan: Properties and applications. Prog Polym Sci 31(7):603–632. https://doi.org/10.1016/j.progpolymsci.2006.06.00110.1016/j.progpolymsci.2006.06.001 ↗
30. Huang G, Yin Y, Pan Z, Chen M, Zhang L, Liu Y, Zhang Y, Gao J (2014) Fabrication of 3D photonic crystals from chitosan that are responsive to organic solvents. Biomacromol 15(12):4396–4402. https://doi.org/10.1021/bm501374t10.1021/bm501374t ↗
31. Du X, Li T, Li L, Zhang Z, Wu T (2015) Water as a colorful ink: transparent, rewritable photonic coatings based on colloidal crystals embedded in chitosan hydrogel. J Mater Chem C 3(15):3542–3546. https://doi.org/10.1039/c5tc00217f10.1039/c5tc00217f ↗
32. Duan J, Liang X, Cao Y, Wang S, Zhang L (2015) High strength chitosan hydrogels with biocompatibility via new avenue based on constructing nanofibrous architecture. Macromolecules 48(8):2706–2714. https://doi.org/10.1021/acs.macromol.5b0011710.1021/acs.macromol.5b00117 ↗
33. Dash M, Chiellini F, Ottenbrite RM, Chiellini E (2011) Chitosan—a versatile semi-synthetic polymer in biomedical applications. Prog Polym Sci 36(8):981–1014. https://doi.org/10.1016/j.progpolymsci.2011.02.00110.1016/j.progpolymsci.2011.02.001 ↗
34. Aider M (2010) Chitosan application for active bio-based films production and potential in the food industry: review. LWT—Food Sci Technol 43(6):837–842. https://doi.org/10.1016/j.lwt.2010.01.02110.1016/j.lwt.2010.01.021 ↗
35. Gan D, Xu T, Xing W, Ge X, Fang L, Wang K, Ren F, Lu X (2019) Mussel-Inspired contact-active antibacterial hydrogel with high cell affinity, toughness, and recoverability. Adv Func Mater 29(1):1805964. https://doi.org/10.1002/adfm.20180596410.1002/adfm.201805964 ↗
36. Liu H, Li W, Wen W, Luo B, Liu M, Ding S, Zhou C (2017) Mechanical properties and osteogenic activity of poly(l-lactide) fibrous membrane synergistically enhanced by chitosan nanofibers and polydopamine layer. Mater Sci Eng C Mater Biol Appl 81:280–290. https://doi.org/10.1016/j.msec.2017.08.01010.1016/j.msec.2017.08.010 ↗
37. Wang J, Gong C, Wen S, Liu H, Qin C, Xiong C, Dong L (2019) A facile approach of fabricating proton exchange membranes by incorporating polydopamine-functionalized carbon nanotubes into chitosan. Int J Hydrogen Energy 44(13):6909–6918. https://doi.org/10.1016/j.ijhydene.2019.01.19410.1016/j.ijhydene.2019.01.194 ↗
38. Chen G, Yi B, Huang Y, Liang Q, Shen H (2019) Development of bright and low angle dependence structural colors from order-disorder hierarchical photonic structure. Dyes Pigm 161:464–469. https://doi.org/10.1016/j.dyepig.2018.09.03910.1016/j.dyepig.2018.09.039 ↗
39. Chen C, Zhu Y, Bao H, Yang X, Li C (2010) Physically controlled cross-linking in gelated crystalline colloidal array photonic crystals. ACS Appl Mater Interfaces 2(5):1499–1504. https://doi.org/10.1021/am100130n10.1021/am100130n ↗
40. Yu B, Liu J, Liu S, Zhou F (2010) Pdop layer exhibiting zwitterionicity: a simple electrochemical interface for governing ion permeability. Chem Commun (Camb) 46(32):5900–5902. https://doi.org/10.1039/c0cc00596g10.1039/c0cc00596g ↗
41. Wu J, Zhao S, Xu S, Pang X, Cai G, Wang J (2018) Acidity-triggered charge-reversible multilayers for construction of adaptive surfaces with switchable bactericidal and bacteria-repelling functions. J Mater Chem B 6(45):7462–7470. https://doi.org/10.1039/c8tb02093k10.1039/c8tb02093k ↗
42. De Giglio E, Trapani A, Cafagna D, Sabbatini L, Cometa S (2011) Dopamine-loaded chitosan nanoparticles: formulation and analytical characterization. Anal Bioanal Chem 400(7):1997–2002. https://doi.org/10.1007/s00216-011-4962-y10.1007/s00216-011-4962-y ↗
43. Wang Y, Fu Y, Li J, Mu Y, Zhang X, Zhang K, Liang M, Feng C, Chen X (2018) Multifunctional chitosan/dopamine/diatom-biosilica composite beads for rapid blood coagulation. Carbohydr Polym 200:6–14. https://doi.org/10.1016/j.carbpol.2018.07.06510.1016/j.carbpol.2018.07.065 ↗
44. Wan Y, Lu X, Dalai S, Zhang J (2009) Thermophysical properties of polycaprolactone/chitosan blend membranes. Thermochim Acta 487(1–2):33–38. https://doi.org/10.1016/j.tca.2009.01.00710.1016/j.tca.2009.01.007 ↗