Analysis and mechanism of adsorption of naphthenic mineral oil, water, formic acid, carbon dioxide, and methane on meta-aramid insulation paper
Source abstract
Abstract
Based on surface science, adsorption of mineral oil, water, gas products (typified by CO2 and CH4), and acids (typified by formic acid) on meta-aramid insulation paper has been investigated by molecular dynamics simulations. When the adsorption process finishes, the free volume fraction in the crystalline region is very small owing to the stable molecular arrangement of fiber. In addition, the number of pores on the surface of the meta-aramid fiber and the pore size are small, and the stable configuration of hydrogen bonds plays an important role, so it is difficult for the mineral oil and aging products to enter the meta-aramid crystalline region. The irregular arrangement of molecules in the amorphous region means that it is easier for the mineral oil and aging products to enter the amorphous region than the crystalline region, and the influence of these substances on the amorphous region is greater than that on the crystalline region. The order of the adsorption strengths of the four types of aging products on meta-aramid fiber is formic acid > water > CO2 > CH4. Therefore, it is necessary to monitor the acid and water contents in transformers with meta-aramid insulation paper as the solid insulation material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Power Transformer Diagnostics and Insulation · High voltage insulation and dielectric phenomena · Electrohydrodynamics and Fluid Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Emsley AM, Stevens GC (1994) Review of chemical indicators of degradation of cellulosic electrical paper insulation in oil-filled transformers. IEEE Sci Meas Technol 141:324–33410.1049/ip-smt:19949957 ↗
2. Ruijing L, Lijun Y, Hanbo Z, Wang K (2012) Reviews on oil-paper insulation thermal aging in power transformers. Trans China Electrotech Soc 27:1–12
3. Yingsa H, Jie L, Jianli Z (2016) Study on the change of temperature to oil–paper insulation characteristic gas in power transformer. Oil Gasfield Surf Eng 35:73–75
4. Koch M, Fischer M, Tenbohlen S (2007) The break-down voltage of insulation oil under the influences of humidity, acidity, particles and pressure. In: International conferences APTADM Wroclaw, Poland
5. Wang XL, Wang ZD (2008) Particle effect on break-down voltage of mineral and ester based transformer oils. Annual report conference on electrical insulation and dielectric phenomena (CEIDP), pp 598–602
6. Kasahara Y, Kato M, Watanabe S et al (2012) Consideration on the relationship between dielectric breakdown voltage and water content in fatty acid ester. J Am Oil Chem Soc 89:1223–122910.1007/s11746-012-2013-2 ↗
7. Fei Y, Chao T, Qian W, Xiong L, Yujing T (2018) Molecular dynamics simulations on the thermal decomposition of meta-aramid fibers. Polymers. https://doi.org/10.3390/polym1007069110.3390/polym10070691 ↗
8. Chao T, Huang B, Hao M, Zhi QX, Jian H, George C (2016) Progress of space charge research on oil-paper insulation using pulsed electroacoustic techniques. Energies. https://doi.org/10.3390/en901005310.3390/en9010053 ↗
9. Ruijin L, JieFeng L, Yangdong L, Lijun Y, Gao J (2015) Frequency domain dielectric characteristic parameters for quantitative assessment of moisture content of oil–paper insulation in power transformers. J Electr Eng 30:204–211
10. Guang NW (2014) High voltage engineering. Machine Press, Beijing
11. Zhong YM, Xi Y (1980) Fundamentals of dielectric theory. National Defense Industry Press, Beijing
12. Baochu Y, Xiaobo L, Yu S (2012) High voltage engineering. Chongqing University Press, Chongqing
13. Yin F, Tang C, Li X, Xiaobo W (2017) Effect of moisture on mechanical properties and thermal stability of meta-aramid fibre used in insulating paper. Polymers. https://doi.org/10.3390/polym910053710.3390/polym9100537 ↗
14. Żukowski P, Kołtunowicz TN, Kierczyński K, Subocz J, Marek S (2015) Formation of water nanodrops in cellulose impregnated with insulating oil. Cellulose 22:861–86610.1007/s10570-015-0543-0 ↗
15. Lundgaard LE, Hansen W, Linhjell D (2014) Aging of oil–impregnated paper in power transformers. IEEE Trans Power Deliv 19:230–23910.1109/TPWRD.2003.820175 ↗
16. Du Y, Zahn M, Lesieutre BC, Mamishev AV, Lindgren SR (1999) Moisture equilibrium in transformer paper-oil systems. IEEE Electr Insul Mag 15:11–2010.1109/57.744585 ↗
17. Lundgaard LE, Hansen W, Ingebrigtsen S (2008) Ageing of mineral oil impregnated cellulose by acid catalysis. IEEE Trans Dielectr Electr Insul 15:540–54610.1109/TDEI.2008.4483475 ↗
18. Da HD, Keng HY (2004) Modern material surface technology science. Metallurgical Industry Press, Beijing
19. Anand A, Patey GN (2018) Mechanism of urea crystal dissolution in water from molecular dynamics simulation. J Phys Chem B 122:1213–122210.1021/acs.jpcb.7b07096 ↗
20. Wangguan M, Sandberg WC (2007) Non-equilibrium all-atom molecular dynamics simulations of free and tethered DNA molecules in nanochannel shear flows. Nanotechnology. https://doi.org/10.1088/0957-4484/18/13/13570210.1088/0957-4484/18/13/135702 ↗
21. Tao Y, Xue Q, Liu Z et al (2014) Tunable hydrogen separation in porous graphene membrane: first-principle and molecular dynamic simulation. ACS Appl Mater Interfaces. https://doi.org/10.1021/am405888710.1021/am4058887 ↗
22. Coasne B, Galarneau A, Pellenq RJ, Francesco D (2013) Adsorption, intrusion and freezing in porous silica: the view from the nanoscale. Soc Rev, Chem. https://doi.org/10.1039/c2cs35384a10.1039/c2cs35384a ↗
23. English NJ, Waldron CJ (2015) Perspectives on external electric fields in molecular simulation: progress, prospects and challenges. Phys Chem Chem Phys 17:12407–1244010.1039/C5CP00629E ↗
24. Heinz H, Ramezani-Dakhel H (2016) Simulations of inorganic–bioorganic interfaces to discover new materials: insights, comparisons to experiment, challenges, and opportunities. Chem Soc Rev 45:412–44810.1039/C5CS00890E ↗
25. Altintas C, Keskin S (2017) Molecular simulations of MOF membranes for separation of ethane/ethene and ethane/methane mixtures. RSC Adv. https://doi.org/10.1039/c7ra11562h10.1039/c7ra11562h ↗
26. Oommen TV (2002) Vegetable oils for liquid-filled transformers. IEEE Electr Insul Mag 18:6–1110.1109/57.981322 ↗
27. Xiaobo W, Chao T, Bo H, Jian H (2018) Review of research progress on the electrical properties and modification of mineral insulating oils used in power transformers. Energies. https://doi.org/10.3390/en1103048710.3390/en11030487 ↗
28. Fenglin L, Wei X (2004) Characteristic comparison between paraffine-base and naphthene-base transformer oils. Transformer 41:6–8
29. Yangsa H, Jie L, Jianli Z (2017) Study on the change of temperature to oil–paper insulation characteristic gas in power transformer. High Volt Eng 43:247–255
30. Ruijin L, Mengzhao Z, Lijun Y, Jiaming Z, Caixin S (2011) Analysis of interaction between transformer oil and cellulose insulation paper using molecular simulation method. High Volt Eng 37:268–275
31. Peng X, Jing G, Wen GL (2004) High technology fiber. Chemical Industry Press, Beijing
32. Kakida H, Chatani Y, Tadokoro H (1976) Crystal structure of poly(m-phenylene isophthalamide). J Polym Sci Pol Phys 14:427–43510.1002/pol.1976.180140305 ↗
33. Vrushali W, Elza C, Roxana S (2014) Molecular basis of crystal morphology-dependent adhesion behavior of mefenamic acid during tableting. Pharm Res 31:160–17210.1007/s11095-013-1149-6 ↗
34. Hugosson HW, Eriksson O, Jansson U, Ruban AV, Souvatzis P, Abrikosov IA (2004) Surface energies and work functions of the transition metal carbides. Surf Sci 557:243–25410.1016/j.susc.2004.03.050 ↗
35. Qijun L, Zhengtang L, Liping F (2009) First-principles study of electronic structure, surface energy, work function of Si(111) surface. J Grad Sun Yat-sen Univ (Nat Sci Med) 30:71–77
36. Xu L, Chao T, Qian W, Xiao PL, Jian H (2017) Molecular simulation research on the micro effect mechanism of interfacial properties of nano SiO2/meta-aramid fiber. Int J Heat Mass Transf 35:123–129
37. Chao T, Xu L, Zhiwei L, Jian H (2017) Interfacial hydrogen bonds and their influence mechanism on increasing the thermal stability of nano-SiO2-modified meta-aramid fibres. Polymers. https://doi.org/10.3390/polym910050410.3390/polym9100504 ↗
38. Chao T, Xu L, Fei Y, Jian H (2017) The performance improvement of aramid insulation paper by nano-SiO2 modification. IEEE Trans Dielectr Electr Insul 24:2049–240010.1109/TDEI.2017.006530 ↗
39. Hirschfelder J, Stevenson D, Eyring H (1937) A theory of liquid structure. J Chem Phys 5:896–91210.1063/1.1749960 ↗
40. Frenkel J (1946) Kinetic theory of liquids. Clarendon Press, Oxford
41. Doolittle AK (1951) Studies in newtonian flow. I. The dependence of the viscosity of liquids on temperature. J Appl Phys 22:1031–103510.1063/1.1700096 ↗
42. Bondi A (1954) Free volumes and free rotation in simple liquids and liquid saturated hydrocarbons. J Chem Phys 58:929–93910.1021/j150521a001 ↗
43. Cohen MH, Turnbull D (1959) Molecular transport in liquids and glasses. J Chem Phys 31:1164–116910.1063/1.1730566 ↗
44. Hangquan L, Chen Z (2007) Polymer physics. Chemical Industry Press, Beijing
45. Sufeng Z (2010) Correlation between the interface and structure characteristics of meta-aramid fiber and the properties for sheetmaking. Ph D Thesis, Shaanxi University
46. Yali Gu (2007) Research on power transformer aging analysis and character, Master Thesis, Chongqing University