Enhanced compressive response of hybrid Mg–CNT nano-composites
Source abstract
Abstract
Uniaxial compressive properties of hybrid Mg/Al–CNT nano-composites are studied in the present paper. Hybrid nano-composites were fabricated using powder metallurgy route followed by microwave assisted rapid sintering technique and hot extrusion. The hybrid Mg/Al–CNT nano-composites exhibited slightly smaller grain sizes compared to monolithic Mg and reasonable hybrid Al–CNT nano-particle distribution up to Al content of 1.00 wt%. Compared to pure Mg, the Mg/Al–CNT nano-composites exhibited higher compressive yield strength (0.2% CYS), ultimate compressive strength (UCS) and work of fracture (WOF) (up to +36%, +76%, +36%) compared to pure Mg but failure strain was compromised. Inclusive of crystallographic texture changes, the effect of hybrid Al–CNT nano-particle integration on the enhancement of compressive properties of Mg is investigated in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Clyne TW, Withers PJ (1993) An introduction to metal matrix composites. Cambridge University Press, Cambridge10.1017/CBO9780511623080 ↗
2. Goh CS, Gupta M, Wei J, Lee LC (2007) J Compos Mater 41:232510.1177/0021998307075445 ↗
3. Goh CS, Wei J, Gupta M (2007) Proceedings of the materials division 43310.1115/IMECE2006-13243 ↗
4. Hassan SF, Gupta M (2007) J Compos Mater 41:253310.1177/0021998307074187 ↗
5. Thakur SK, Kwee GT, Gupta M (2007) J Mater Sci 42:10040. doi:https://doi.org/10.1007/s10853-007-2004-010.1007/s10853-007-2004-0 ↗
6. Nguyen QB, Gupta M (2008) Compos Sci Technol 68:218510.1016/j.compscitech.2008.04.020 ↗
7. Habibi MK, Joshi SP, Gupta M (2010) Acta Mater. doi:https://doi.org/10.1016/j.actamat.2010.07.02810.1016/j.actamat.2010.07.028 ↗
8. Wong EW, Sheehan PE, Lieber CM (1997) Science 277:197110.1126/science.277.5334.1971 ↗
9. Yao Z, Zhu CC, Cheng M, Liu J (2001) Comput Mater Sci 22:18010.1016/S0927-0256(01)00187-2 ↗
10. Paramsothy M, Hassan SF, Srikanth N, Gupta M (2010) J Nanosci Nanotechnol 10:95610.1166/jnn.2010.1809 ↗
11. Li Q, Viereckl A, Rottmair CA, Singer RF (2009) Compos Sci Technol 69:119310.1016/j.compscitech.2009.02.020 ↗
12. George R, Kashyap KT, Rahul R, Yamdagni S (2005) Scr Mater 53:115910.1016/j.scriptamat.2005.07.022 ↗
13. Jiang L, Jonas JJ, Luo AA, Sachdev AK, Godet S (2007) Mater Sci Eng A 445–446:30210.1016/j.msea.2006.09.069 ↗
14. Brown DW, Agnew SR, Bourke MAM, Holden TM, Vogel SC, Tomé CN (2005) Mater Sci Eng A 399:110.1016/j.msea.2005.02.016 ↗
15. Staroselsky A, Anand L (2003) Int J Plast 19:184310.1016/S0749-6419(03)00039-1 ↗
16. Meyers MA, Vöhringer O, Lubarda VA (2001) Acta Mater 49:402510.1016/S1359-6454(01)00300-7 ↗
17. Koike J, Kobayashi T, Mukai T et al (2003) Acta Mater 51:205510.1016/S1359-6454(03)00005-3 ↗
18. Chang LL, Wang YN, Zhao X, Qi M (2009) Mater Charact 60:99110.1016/j.matchar.2009.04.001 ↗
19. Yoo MH (1981) Metall Trans A 12:40910.1007/BF02648537 ↗
20. Goh CS, Wei J, Lee LC, Gupta M (2006) Nanotechnology 17:710.1088/0957-4484/17/1/002 ↗
21. Habibi MK, Paramsothy M, Hamouda AMS, Gupta M (2010) Compos Sci Technol (in press)
22. Goh CS, Wei J, Lee LC, Gupta M (2008) Compos Sci Technol 68:143210.1016/j.compscitech.2007.10.057 ↗
23. Paramsothy M, Hassan SF, Srikanth N, Gupta M (2008) J Phy D 4110.1088/0022-3727/41/17/175402 ↗
24. Paramsothy M, Gupta M, Srikanth N (2008) J Compos Mater 42:129710.1177/0021998308092198 ↗
25. Barnett MR (2007) Mater Sci Eng A 464:110.1016/j.msea.2006.12.037 ↗
26. Salem AA, Kalidindi SR, Doherty RD (2003) Acta Mater 51:422510.1016/S1359-6454(03)00239-8 ↗
27. Salem AA, Kalidindi SR, Semiatin SL (2005) Acta Mater 53:349510.1016/j.actamat.2005.04.014 ↗
28. Han BQ, Dunand DC (2000) Mater Sci Eng A 277:29710.1016/S0921-5093(99)00074-X ↗
29. Zhong XL, Wong WLE, Gupta M (2007) Acta Mater 55:633810.1016/j.actamat.2007.07.039 ↗
30. Gupta M, Lai MO, Soo CY (1996) Mater Sci Eng A 210:11410.1016/0921-5093(95)10077-6 ↗
31. Courtney TH (2000) Mechanical behavior of materials. McGraw-Hill, Michigan
32. Száraz Z, Trojanová Z, Cabbibo M, Evangelista E (2007) Mater Sci Eng A 462:22510.1016/j.msea.2006.01.182 ↗
33. Hassan SF, Gupta M (2006) J Mater Sci 41:2229. doi:https://doi.org/10.1007/s10853-006-7178-310.1007/s10853-006-7178-3 ↗
34. Wong WLE, Gupta M (2007) Compos Sci Technol 67:154110.1016/j.compscitech.2006.07.015 ↗
35. Dai LH, Ling Z, Bai YL (2001) Compos Sci Technol 61:105710.1016/S0266-3538(00)00235-9 ↗
36. Barnett MR, Keshavarz Z, Beer AG, Atwell D (2004) Acta Mater 52:509310.1016/j.actamat.2004.07.015 ↗
37. Hall D, Bacon DJ (2002) Introduction to dislocation. Oxford Butterworth-Heinemann, Oxford
38. Kelly BT (1981) Physics of graphite. Applied Science Publishers, London
39. To CWS (2006) Finite Elem Anal Des 42:40410.1016/j.finel.2005.08.004 ↗
40. Kouzeli M, Mortensen A (2002) Acta Mater 50:3910.1016/S1359-6454(01)00327-5 ↗
41. Arsenault RJ, Shi N (1986) Mater Sci Eng 81:17510.1016/0025-5416(86)90261-2 ↗
42. Aikin RM Jr, Christodoulou L (1991) Scr Metall Mater 25:910.1016/0956-716X(91)90345-2 ↗
43. Karaman I, Sehitoglu H, Beaudoev AJ, Chumlyakov YI, Maier HJ, Tomé CN (2000) Acta Mater 48:203110.1016/S1359-6454(00)00051-3 ↗
44. Barnett MR (2007) Mater Sci Eng A 464:810.1016/j.msea.2007.02.109 ↗