True stress-controlled ratcheting behavior of 304LN stainless steel
Source abstract
Abstract
Cyclic plastic deformation response of materials under asymmetric stress cycling is known as ratcheting. Combined effect of fatigue and permanent tensile strain accumulation results in early failure of materials during ratcheting. For this reason, ratcheting should be emphasized in the safety assessment and life estimation of engineering structures. Engineering and true stress-controlled ratcheting behavior of 304LN stainless steel has been carried out at room temperature. Effects of stress amplitude, mean stress, and their histories (i.e., step loading) on the ratcheting behavior are analyzed in this investigation. It is noticed that under true stress-controlled ratcheting experiments, ratcheting life increases in presence of mean stress, and hysteresis loop area and plastic strain energy decreases with the increasing mean stress. A comparison has also been drawn in between the true and engineering stress-controlled tests, and massive differences in ratcheting life and strain accumulation were found. Ratcheting strain accumulation ceases in descending step loading, is noticed in this work.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Coffin LF (1964) J Basic Eng 86:67310.1115/1.3655919 ↗
2. Radhakrishnan VM (1975) Nucl Eng Design 34(3):37910.1016/0029-5493(75)90057-6 ↗
3. Ide R, Yoshida F, Shiratori E (1978) Bull JSME 21(161):157610.1299/jsme1958.21.1576 ↗
4. Pilo D, Reik W, Mayer P, Macherauch E (1979) Fatigue Eng Mater Struct 1:28110.1111/j.1460-2695.1979.tb00384.x ↗
5. Yoshida F (1989) Rate-dependent behavior of SUS304 Stainless steel under uniaxial creep-ratcheting and biaxial cyclic loading at room temperature. ASME Pressure Vessels and Piping Conference, Honolulu, Hawii, pp 81–86
6. Yoshida F (1990) Int J Press Vessel Pip 44(2):20710.1016/0308-0161(90)90130-A ↗
7. Rugges MD, Krempl E (1990) J Mech Phys Solids 38:57510.1016/0022-5096(90)90015-V ↗
8. Paul SK, Sivaprasad S, Dhar S, Tarafder S (2011) Mater Sci Eng A 528(24):734110.1016/j.msea.2011.06.009 ↗
9. Kang G, Gao Q, Yang X (2002) Mech Mater 34:14510.1016/S0167-6636(01)00099-0 ↗
10. Kang G, Kan Q, Zhang J, Sun Y (2006) Int J Plasticity 22(5):85810.1016/j.ijplas.2005.05.006 ↗
11. Taleb L, Hauet A (2009) Int J Plasticity 25(7):135910.1016/j.ijplas.2008.09.004 ↗
12. Paul SK, Sivaprasad S, Dhar S, Tarafder S (2011) Mech Mater 43(11):70510.1016/j.mechmat.2011.07.011 ↗
13. Paul SK, Sivaprasad S, Dhar S, Tarafder S (2010) J Nucl Mater 401(1–3):1710.1016/j.jnucmat.2010.03.014 ↗
14. Hassan T, Kyriakides S (1992) J Plasticity 8:9110.1016/0749-6419(92)90040-J ↗
15. Park SJ, Kim KS, Kim HS (2007) Fatigue Fract Eng Mater Struct 30(11):107610.1111/j.1460-2695.2007.01177.x ↗
16. Kulkarni SC, Desai YM, Kant T, Reddy GR, Parulekar Y, Vaze KK (2003) Int J Press Vessel Pip 80: 17910.1016/S0308-0161(03)00029-2 ↗
17. Paul SK, Sivaprasad S, Dhar S, Tarafder S (2010) Int J Press Vessel Pip 87:46410.1016/j.ijpvp.2010.06.002 ↗
18. Paul SK, Sivaprasad S, Dhar S, Tarafder S (2010) Theor Appl Fract Mech 54:6310.1016/j.tafmec.2010.06.016 ↗
19. Jiang Y, Sehitoglu H (1994) J Plasticity 10:57910.1016/0749-6419(94)90015-9 ↗
20. Jiang Y, Sehitoglu H (1994) Int J Plasticity 10:84910.1016/0749-6419(94)90017-5 ↗
21. Besson J, Guillemer-Neel C (2003) Mech Mater 35:110.1016/S0167-6636(02)00169-2 ↗
22. Floreen S, Hayden HW (1970) Scripta Metall 4(2):8710.1016/0036-9748(70)90170-5 ↗
23. Han KS, Margolin H (1989) Mater Sci Eng A 112:13310.1016/0921-5093(89)90352-3 ↗
24. Xia Z, Kujawski D, Ellyin F (1996) Int J Fatigue 18(5):33510.1016/0142-1123(96)00088-6 ↗
25. JoDean M (1965) ASTM STP 378:45
26. Christ HJ, Wamukwamba CK, Mughrabi H (1999) In: Wu XR, Wang ZG (eds) Fatigue 99. Higher Education Press, Beijing, p 2165
27. Kliman V, Bily M (1980) Mater Sci Eng 44:7310.1016/0025-5416(80)90232-3 ↗
28. Turner APL, Martin TJ (1980) Metall Trans A 11:47510.1007/BF02654571 ↗
29. Lorenzo F, Laird C (1984) Mater Sci Eng 62:20510.1016/0025-5416(84)90223-4 ↗
30. Mughrabi H, Christ HJ (1997) ISIJ Int 37:115410.2355/isijinternational.37.1154 ↗
31. Eckert R, Laird C, Bassani J (1987) Mater Sci Eng 91:8110.1016/0025-5416(87)90285-0 ↗
32. Lukas P, Kunz L (1989) Int J Fatigue 11:5510.1016/0142-1123(89)90048-0 ↗
33. Glaser A, Eifler D, Macherauch E (1991) Matere Wiss Werkst Tech 22:26610.1002/mawe.19910220708 ↗
34. Holste C, Kleinert W, Gurth R, Mecke K (1994) Mater Sci Eng A 187:11310.1016/0921-5093(94)90338-7 ↗
35. Jiang Y, Zhang J (2008) Int J Plasticity 24(9):148110.1016/j.ijplas.2007.10.003 ↗
36. Chaboche JL, Dang Van K, Cordier G (1979) Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel. SMiRT’5, Div. L, Berlin, L 11/3
37. Bari S, Hassan T (2000) Int J Plasticity 16:38110.1016/S0749-6419(99)00059-5 ↗
38. Paul SK, Sivaprasad S, Dhar S, Tarafder M, Tarafder S (2010) Comp Mater Sci 48(3):66210.1016/j.commatsci.2010.02.037 ↗
39. Zhang J, Jiang Y (2008) Int J Plasticity 24(10):189010.1016/j.ijplas.2008.02.008 ↗
40. Miner MA (1945) J Appl Mech 67:A15910.1115/1.4009458 ↗