Surface tension of liquid Al–Au binary alloys
Source abstract
Abstract
The surface tensions γ of liquid Al–Au binary alloys are measured contactlessly using the oscillation drop technique of electromagnetic levitation. Data are obtained in experiments performed on ground and in micro-gravity during a parabolic flight campaign. For all samples and for all compositions, the surface tension decreases linearly with temperature. At 1400 K, γ monotonously decreases with increasing Al concentration. Features of compound formation, such as a maximum in the isothermal surface tension, are not evident from the experimental data. The results are in good agreement with the Butler and the Chatain model both using the sub-regular solution approximation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Solidification and crystal growth phenomena · Thermodynamic and Structural Properties of Metals and Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Schmitz J, Brillo J, Egry I, Schmid-Fetzer R (2009) Surface tension of liquid Al–Cu binary alloys. Int J Mat Res 100:1529–153510.3139/146.110221 ↗
2. Brillo J, Plevachuk Y, Egry I (2010) Surface tension of liquid Al–Cu–Ag ternary alloys. J Mater Sci 45:5150–5157. doi: 10.1007/s10853-010-4512-610.1007/s10853-010-4512-6 ↗
3. Egry I, Brillo J, Holland-Moritz D, Plevachuk Y (2008) The surface tension of liquid aluminium-based alloys. Mat Sci Eng A 495:14–1810.1016/j.msea.2007.07.104 ↗
4. Kobatake H, Brillo J, Schmitz J, Pichon PY (2015) Surface tension of binary Al–Si liquid alloys. J Mater Sci 50:3351–3360. doi: 10.1007/s10853-015-8883-610.1007/s10853-015-8883-6 ↗
5. Brillo J, Chatain D, Egry I (2009) Surface tension of liquid binary alloys—theory versus experiment. Int J Mat Res 100:53–5810.3139/146.101787 ↗
6. Busse FH (1984) Oscillations of a rotating liquid drop. J Fluid Mech 142:1–810.1017/S0022112084000963 ↗
7. Plevachuk Y, Egry I, Brillo J, Holland-Moritz D, Kaban I (2007) Density and atomic volume in Al–Fe and Al–Ni binary alloys. Int J Mat Res 98:107–11110.3139/146.101447 ↗
8. Brillo J, Egry I, Westphal J (2008) Density and thermal expansion of liquid binary Al–Ag and Al–Cu alloys. Int J Mat Res 99:162–16710.3139/146.101623 ↗
9. Schick M, Brillo J, Egry I, Hallstedt B (2012) Viscosity of Al–Cu liquid alloys: measurement and thermodynamic description. J Mater Sci 47:8145–8152. doi: 10.1007/s10853-012-6710-x10.1007/s10853-012-6710-x ↗
10. Brillo J, Brooks R, Egry I, Quested P (2008) Density and viscosity of liquid ternary Al–Cu–Ag alloys. High Temp High Press 37:371–381
11. Kobatake H, Schmitz J, Brillo J (2014) Density and viscosity of ternary Al–Cu–Si liquid alloys. J Mater Sci 49:3541–3549. doi: 10.1007/s10853-014-8072-z10.1007/s10853-014-8072-z ↗
12. Peng HL, Voigtmann T, Kolland G, Kobatake H, Brillo J (2015) Structural and dynamical properties of liquid Al–Au alloys. Phys Rev B 92(18):184201–18420110.1103/PhysRevB.92.184201 ↗
13. Goumiri L, Joud JC, Desre P, Hicter JM (1979) Tensions superficielles d’alliages liquides binaires présentant un caractère d’immiscibilité: Al–Pb, Al–Bi, Al–Sn et Zn–Bi. Surf Sci 83:471–48610.1016/0039-6028(79)90057-8 ↗
14. Pamies PA, Cordovilla CG, Louis E (1984) The measurement of surface tension of liquid aluminum by means of the maximum bubble pressure method: the effect of surface oxidation. Scr Metall 18:869–87210.1016/0036-9748(84)90251-5 ↗
15. Laty P, Joud JC, Desre P (1977) Tension superficielle d’alliages liquides aluminium-cuivre. Surf Sci 69:508–52010.1016/0039-6028(77)90130-3 ↗
16. Eustathopoulos N, Nicholas MG, Drevet B (1999) Wettability at high temperatures. Pergamon Materials Series, New York
17. Watolin NA, Esin OA, Uchow WF, Dubinin EL (1969) Trudy Inst Met Swardlowsk 18:73–85
18. Yatsenko SP, Konomenko VI, Sukhman AL (1972) Experimental studies of the temperature dependence of the surface tension and density of tin, indium, aluminum, and gallium. Tepl Vysok Temp 10:66–71
19. Lang G (1974) Einfluß von Zusatzelementen auf die Oberflächenspannung von Reinstaluminium. Aluminium 50:731–734
20. Eremenko WN, Nichenko WI, Naidich JW (1961) Izw Akad Nauk OTN 3:150–154
21. Mills KC (2002) Recommended values of thermophysical properties for selected commercial alloys. Woodhead Publishing Ltd., Cambridge, UK10.1533/9781845690144 ↗
22. Ricci E, Novakovic R (2001) Wetting and surface tension measurements on gold alloys. Gold Bull 34:41–4910.1007/BF03214811 ↗
23. Krause W, Sauerwald F, Michalke M (1929) Die Oberflächenspannung von Gold, Zink, Gold-Kupfer-, Silber-Kupfer- und Eisenlegierungen. Z. Anorg. Chem. 181:353–37110.1002/zaac.19291810133 ↗
24. Naidich YV, Perevertailo VM, Obushchak LP (1975) Density and surface tension of alloys of the systems Au–Si and Au–Ge. Sov Powder Met 14:403–40410.1007/BF00807814 ↗
25. Nogi K, Oishi K, Ogino K (1989) Wettability of solid oxides by liquid pure metals. Trans Jpn Inst Met 30:137–145
26. Egry I, Lohöfer G, Jacobs G (1995) Surface tension of liquid metals: results from measurements on ground and in space. Phys Rev Lett 75:4043–404610.1103/PhysRevLett.75.4043 ↗
27. Karpel A, Gur G, Atzmon Z, Kaplan WD (2007) TEM microstructural analysis of As-Bonded Al–Au wire-bonds. J Mater Sci 42:2334–2346. doi: 10.1007/s10853-007-1592-z10.1007/s10853-007-1592-z ↗
28. Karpel A, Gur G, Atzmon Z, Kaplan WD (2007) Microstructural evolution of gold–aluminum wire-bonds. J Mater Sci 42:2347–2357.doi: 10.1007/s10853-007-1593-y10.1007/s10853-007-1593-y ↗
29. Li M, Li C, Wang F, Luo D, Zhang W (2004) Thermodynamic assessment of the AlAu system. J Alloys Compd 385:199–20610.1016/j.jallcom.2004.05.007 ↗
30. Massalski TB, Diagram Binary Alloy Phase (1996) ASM. Materials Park, Ohio
31. Sommer F (1982) Association model for the description of the thermodynamic functions of liquid alloys. 1. Basic concepts. Z Metallkd 73:72–76
32. Sommer F (1982) Association model for the description of the thermodynamic functions of liquid alloys. 2. Numerical treatment and results. Z Metallkd 73:77–86
33. Butler JAV (1932) The thermodynamics of the surfaces of solutions. Proc R Soc Lond A 135:348–37510.1098/rspa.1932.0040 ↗
34. Wynblatt P, Saúl A, Chatain D (1998) The effects of prewetting and wetting transitions on the surface energy of liquid binary alloys. Acta Mater 46:2337–234710.1016/S1359-6454(98)80015-3 ↗
35. Antion C, Chatain D (2007) Liquid surface and liquid/liquid interface energies of binary subregular alloys and wetting transitions. Surf Sci 10:2232–224410.1016/j.susc.2007.03.026 ↗
36. Bhatia AB, Singh RN (1982) Short range order and concentration fluctuations in regular and compound forming alloys. Phys Chem Liq 11:285–31310.1080/00319108208080752 ↗
37. Novakovic R, Tanaka T, Muolo ML, Lee J, Passerone A (2005) Bulk and surface properties of liquid Ag–X (X = Ti, Hf) compound forming alloys. Surf Sci 591:56–6910.1016/j.susc.2005.06.022 ↗
38. Egry I (2004) Surface tension of compound forming liquid binary alloys: a simple model. J Mater Sci 39:6365–6366. doi: 10.1023/B:JMSC.0000043610.33135.f410.1023/B:JMSC.0000043610.33135.f4 ↗
39. Brillo J (2016) Thermophysical properties of multicomponent liquid alloys. De Gruyter Studium, Berlin10.1515/9783110468991 ↗
40. Hoar TP, Melford DA (1957) The surface tension of binary liquid mixtures: lead + tin and lead + indium alloys. Trans Farad Soc 53:315–32610.1039/tf9575300315 ↗
41. Tanaka T, Iida T (1994) Application of a thermodynamic database to calculation of surface tension for iron base liquid alloys. Steel Res 65:21–2810.1002/srin.199400921 ↗
42. Tanaka T, Hack K, Iida T, Hara S (1996) Application of thermodynamic databases to the evaluation of surface tensions of molten alloys, salt mixtures and oxide mixtures. Z Metallkd 87:380–389
43. Kaptay G (2015) Partial surface tension of components of a solution. Langmuir 31:5796–580410.1021/acs.langmuir.5b00217 ↗
44. Brillo J, Egry I, Ho I (2006) Density and thermal expansion of liquid Ag–Cu and Ag–Au alloys. Int J Thermophys 27:494–50610.1007/s10765-005-0011-4 ↗
45. Kaptay G (2008) A unified model for the cohesive enthalpy, critical temperature, surface tension and volume thermal expansion coefficient of liquid metals of bcc, fcc and hcp crystals. Mat Sci Eng A 495:19–2610.1016/j.msea.2007.10.112 ↗
46. Miracle DB, Sanders WS, Senkov ON (2003) The influence of efficient atomic packing on the constitution of metallic glasses. Philos Mag 83:2409–242810.1080/1478643031000098828 ↗
47. Miracle DB, Louzguine-Luzgin D, Louzguina-Luzgina L, Inoue A (2010) An assessment of binary metallic glasses: correlations between structure, glass forming ability and stability. Int Mater Rev 55:218–25610.1179/095066010X12646898728200 ↗
48. Speiser R, Poirier DR, Yeum K (1987) Surface tension of binary liquid alloys. Scr Metal 21:687–69210.1016/0036-9748(87)90385-1 ↗
49. Murakami T, Ono S, Tamura M, Kurata M (1951) On the theory of surface tension of regular solution. J Phys Soc Jpn 6:309–31210.1143/JPSJ.6.309 ↗
50. Ono S, Kondo S (1960) Molecular theory of surface tension in liquids. Handbuch der Physik. Springer, Berlin, pp 134–280
51. Dörfler HD (2001) Grenzflächen und kolloid-disperse Systeme. Springer, Berlin
52. Brillo J, Egry I (2003) Density determination of liquid copper, nickel, and their alloys. Int J Thermophys 24:1155–117010.1023/A:1025021521945 ↗
53. Brillo J, Egry I, Giffard HS, Patti A (2004) Density and thermal expansion of liquid Au–Cu alloys. Int J Thermophys 25:1881–188810.1007/s10765-004-7742-5 ↗
54. Brillo J, Lohöfer G, Schmidt-Hohagen F, Schneider S, Egry I (2006) Thermophysical property measurements of liquid metals by electromagnetic levitation. Int J Mater Prod Technol 26:247–27310.1504/IJMPT.2006.009469 ↗
55. Brillo J, Fritze H, Lohöfer G, Schulz M, Stenzel C (2012) Materials research in microgravity 2012 proceeding of a symposium held at the 141st TMS 2012 annual meeting and exhibition, Orlando, Floria, NASA/CP-2012-217466
56. Krishnan S, Hansen GP, Hauge RH (1990) Spectral emissivities and optical-properties of electromagnetically levitated liquid-metals as functions of temperature and wavelength. High Temp Sci 29:17–52
57. Cummings DL, Blackburn DA (1991) Oscillations of magnetically levitated aspherical droplets. J Fluid Mech 224:395–41610.1017/S0022112091001817 ↗
58. Levin ES, Ayushima GD, Geld PV, Ryss MA, Seryi VF (1971) In: Eremenko VN (ed) Fiz. Khim. Poverkh Yavleni, vol 120. Naukova Dumka, Kiev, pp 153–156 (in Russian). Cited in Keene BJ (1993) Review of data for the surface tension of pure metals. Int Mater Rev 38:157–192
59. Naidich YV, Eremenko VN (1961) Large drop method for the high-temperature of determination of the surface tensions and densities of molten metals. Fiz Met Metalloved 11:883–888
60. Paramonov VA, Karamydhev EP, Ukhov VF (1977) Colloq. On physics and chemistry of surface melts. In: Fiz. Khim. Poverkh Rasp. Tbilisi, Metsniyerba, p 155 (in Russian). Cited in Keene BJ (1993) Review of data for the surface tension of pure metals. Int Mater Rev 38:157–192
61. Bykova NA, Schevchenko VG (1974) Density and surface tension of copper aluminum, gallium, indium and tin, Physicochemical investigations of liquid metals and alloys. Severdlovsk 29:42
62. Davies VL, Wesr JM (1963–1964) Influence of small additions of sodium on the surface tension of aluminum and aluminum-silicon alloys. J Inst Met 92:208–210
63. Saravanan RA, Molina JM, Narciso J, Carcia Cordovilla C, Louis E (2001) Effect of nitrogen on the surface tension of pure aluminum at high temperature. Scr Mater 44:965–97010.1016/S1359-6462(00)00688-6 ↗
64. Popel SI, Kozhurkov VN, Zhukov AA (1975) Izv Akad Nauk SSSR Met 5:69 (in Russian). Cited in Popel SI, Zakharova TV, Kozhevnikova VA (1976) Density, surface tension and adhesion to iron of Pb-Sn melts. Prot Met 12:423–425
65. Pelzel E (1948) Surface tension of liquid metals and alloys, I–II. Berg Hüttenmänn Monatsh 93:247–254
66. Molina JM, Voytovych R, Louis E, Eustathopoulos N (2007) The surface tension of liquid aluminium in high vacuum: the role of surface condition. Int J Adh Adhes 27:394–40110.1016/j.ijadhadh.2006.09.006 ↗
67. Adachi M, Schick M, Brillo J, Egry I, Watanabe M (2010) Surface tension and density measurement of liquid SiCu binary alloys. J Mater Sci 45:2002–2008. doi: 10.1007/s10853-009-4149-510.1007/s10853-009-4149-5 ↗
68. Gruner S, Köhler M, Hoyer W (2009) Surface tension and mass density of liquid Ge–Cu alloys. J Alloys Compd 472:335–33810.1016/j.jallcom.2009.04.005 ↗
69. Amore S, Ricci E, Lanata T, Novakovic R (2008) Surface tension and wetting behaviour of molten Cu–Sn alloys. J Alloys Compd 452:161–16610.1016/j.jallcom.2007.01.178 ↗
70. Moser Z, Gasior W, Pstrus J (2001) Surface tension measurements of of the Bi–Sn and Sn–Bi–Ag liquid alloys. J Electr Mat 30:1104–111110.1007/s11664-001-0136-6 ↗