Special WC/Co orientation relationships at basal facets of WC grains in WC–Co alloys
Source abstract
Abstract
In WC–Co alloys prepared by liquid phase sintering WC grains are partly surrounded by the Co binder and are terminated by basal and prismatic facets. This work reports transmission electron microscopy (TEM) observations on basal WC/Co interfaces. Two kinds of preferred orientation relationships are found. The one most common corresponds to the joining of (0001)WC with (111)Co planes. It leads to a large parametric misfit of 15% and is observed for only small pools of Co, mainly located in corners formed by the contact between WC grains. The second type of interface corresponds to the joining of (0001)WC with (001)Co and is more rarely found. For random WC/Co orientation relationships a thin WC1−x cubic layer about two atomic rows is revealed at the interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Exner HE (1979) Int Metal Rev 24:14910.1179/095066079790136363 ↗
2. Sarin VK, Johannesson T (1975) Metal Sci 9:47210.1179/030634575790444531 ↗
3. Mohan K, Strutt PR (1996) Mat Sci Eng A 209:23710.1016/0921-5093(95)10101-2 ↗
4. Göthelid M, Haglund S, Ågren J (2000) Acta Mater 48:435710.1016/S1359-6454(00)00210-X ↗
5. Kim S, Han SH, Park JK, Kim HE (2003) Scripta Mater 48:63510.1016/S1359-6462(02)00464-5 ↗
6. Schubert WD, Bock A, Lux B (1995) Int J Refract Metal Hard Mater 13:28110.1016/0263-4368(95)92674-9 ↗
7. Christensen M, Wahnström G, Lay S, Allibert CH (2007) Acta Mater 55:151510.1016/j.actamat.2006.10.013 ↗
8. Wang Y, Heusch M, Lay S, Allibert CH (2002) Phys Stat Sol A 193:27110.1002/1521-396X(200209)193:2<271::AID-PSSA271>3.0.CO;2-O ↗
9. Stadelmann P (1987) Ultramicroscopy 21:13110.1016/0304-3991(87)90080-5 ↗
10. Bonnet R, Loubradou M (1997) Ultramicroscopy 69:24110.1016/S0304-3991(97)00048-X ↗
11. Villars P, Calvert LD (1985) Pearson’s handbook of crystallographic data for intermetallic phases. vol. 2. American Society for Metals, Metals Park
12. Maritzen W, Ettmayer P, Kny E (1985) Powder Metall Int 17(2):68
13. Lay S (2006) In: Proceedings of the Euro PM2006 Congress and Exhibition, Gand, October 2006, The European Powder Metallurgy Association, vol. 1 Hard Materials, p 55
14. Spence JCH (1988) Experimental high resolution electron microscopy. Oxford University Press, New York
15. Hirth JP, Lothe J (1968) Theory of dislocations. McGraw-Hill Book Company, New York, McGraw-Hill Series in Materials Science and Engineering
16. Bollmann W (1970) Crystal defects and crystalline interfaces. Springer-Verlag, Berlin10.1007/978-3-642-49173-3 ↗
17. Yamamoto T, Ikuhara T, Watanabe T, Sakuma T, Taniuchi Y, Okada K, Tanase T (2001) J Mater Sci 36:3885. doi:10.1023/A:101795370164110.1023/A:1017953701641 ↗
18. Delanoë A, Bacia M, Pauty E, Lay S, Allibert CH (2004) J Cryst Growth 270:21910.1016/j.jcrysgro.2004.05.101 ↗
19. Nagender Naidu SV, Sriramamurthy AM, Rama Rao P (1991) In: Nagender Naidu SV, Rama Rao P (eds) Phase diagrams of binary tungsten alloys, monograph series on alloy phase diagrams. The Indian Institute of Metals, Calcutta, p 37
20. Lay S, Hamar-Thibault S, Lackner A (2002) Int J Refract Metal Hard Mater 20:6110.1016/S0263-4368(01)00071-3 ↗