Negative thermal expansion artificial material from iron-nickel alloys by oxide co-extrusion with reductive sintering
Source abstract
Abstract
Objects with a fine-scale design of bimetallic beams can display negative thermal expansion. Based on a unit cell design for a negative expansion, produced by Optimal Design methods, we fabricate a thermoelastic “artificial material” using coextrusion of iron and nickel oxides, followed by reductive sintering. A bulk sample with 162 unit cells from Fe-60Ni and Fe-36Ni alloys displayed a thermal expansion coefficient of −3.0 × 10−6/°C, in agreement with the optimal design prediction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Expansion and Ionic Conductivity · Thermodynamic and Structural Properties of Metals and Alloys · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. H. M. Kagaya and T. Soma Solid State Commun. 85 (1993) 617.10.1016/0038-1098(93)90320-M ↗
2. T. Suzuki, A. Fijita, T. Chiang and K. Fukamichi Mater. Sci. Engng. A 181/182 (1994) 954.10.1016/0921-5093(94)90777-3 ↗
3. G. Ernst, C. Broholm, G. R. Kowach and A. P. Ramirez Nature 396 (1998) 147.10.1038/24115 ↗
4. A. W. Sleight Ann. Rev. Mater. Sci. 281 (1998) 29.10.1146/annurev.matsci.28.1.29 ↗
5. N. J. Capiati J. Polym. Sci. Polym. Phys. Ed. 151 (1997) 1427.
6. C. L. Choy, F. C. Chen and E. L. Ong Polymer 20 (1979) 1191.10.1016/0032-3861(79)90142-3 ↗
7. M. De F. F. Pinheiro, D. J. Radcliffe and H. M. Rosenberg, in Proc. of the Int. Cryog. Eng. Conf., 7th London (1978) p. 494.
8. G. Hausch, R. Bacher and J. Hartmann Physica B 161 (1998) 22.10.1016/0921-4526(89)90094-X ↗
9. J. S. Moya, A. G. Verduch and M. Hortal Trans. J. Brit. Ceram. Soc. 73 (1974) 177.
10. D. A. Woodcock, P. Lightfoot and R. I. Smith Mater. Res. Soc. Symp. Proc. 547 (1999) 191.10.1557/PROC-547-191 ↗
11. G. L. Belenkii, E. Yu. Salaev, N. A. Suleimanov, N. A. Abdullaev and V. Ya. Shteishraiber Solid State Commun. 53 (1985) 967.10.1016/0038-1098(85)90470-3 ↗
12. O. Sigmund and S. Torquato J. Mech. Phys. Solids 45 (1997) 1037.10.1016/S0022-5096(96)00114-7 ↗
13. Bing-Chung Chen, “Optimal Design of Material Microstructure and Optimization of Structural Topology for Design-Dependent Loads,” Ph.D. Thesis, Mechanical Engineering, University of Michigan, 2000.
14. Bing-Chung Chen, Emilio C. N. Silva and N. Kikuchi Intern. J. Numer. Meth. Engng. 52 (2001) 23.10.1002/nme.271 ↗
15. M. P. BendsØe and N. Kikuchi Comp. Meth. Appl. Mech. Engng. 71 (1988) 197.10.1016/0045-7825(88)90086-2 ↗
16. Y. Tanji J. Phys. Soc. Japan 31 (1975) 1366.10.1143/JPSJ.31.1366 ↗
17. C. Van Hoy, A. Barda, M. Griffith and J. W. Halloran J. Amer. Ceram. Soc. 81 (1998) 152.10.1111/j.1151-2916.1998.tb02307.x ↗
18. A. T. Crumm and J. W. Halloran ibid. 81 (1998) 1053.10.1111/j.1151-2916.1998.tb02448.x ↗
19. A. T. Crumm, “MicroFabrication by Coextrusion,” Ph.D. Dissertation University of Michigan, 2000.