The effect of phase transformation on the thermal expansion property in Al/ZrW2O8 composites
Source abstract
Abstract
This article studied the effect of phase transformation on the thermal expansion property in Al/ZrW2O8 composites. The Al/ZrW2O8 composites of low-thermal expansion were fabricated by a squeeze casting method. The coefficient of thermal expansion (CTE) of as-made composites was discovered sharply increased at around 130 °C. The X-ray diffraction (XRD) spectra showed the existence of high-pressure γ-phase in the as-made composites. This high-pressure γ-phase was considered to be induced by the compressive residual stress originated from the thermal mismatch between Al matrix and ZrW2O8 particles. The in situ high-temperature XRD and the differential scanning calorimetry technique were used to study this thermally expanded abruption phenomenon. It was found that the phase transformation from high-pressure γ-phase to the low-pressure phases (α/β phase) in the composites should be responsible for fluctuation in the CTE of composites. Furthermore, using a proper heat treatment to eliminate the high-pressure phase in the composite, the Al/ZrW2O8 composites of low and uniform CTE (from 20 to 200 °C) could be achieved. And when temperature increased again, the thermal mismatch stresses between the metal matrix and ceramic particles in the composite were not large enough to re-induce the α-γ transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Expansion and Ionic Conductivity · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Yoda S, Kurihara N, Wakashima K, Umekawa S (1978) Metall Trans A 9A:122910.1007/BF02652246 ↗
2. Neite G, Mielke S (1991) Mater Sci Eng A148:8510.1016/0921-5093(91)90868-N ↗
3. Vaidya RJ, Chawla KK (1994) Compos Sci Technol 50:1310.1016/0266-3538(94)90122-8 ↗
4. Hall IW, Patterson WG (1991) Scripta Metall Mater 25:80510.1016/0956-716X(91)90229-T ↗
5. Stefanik P, Sebo P (1994) Theor Appl Fract Mech 20:4110.1016/0167-8442(94)90026-4 ↗
6. Rézai-Aria F, Liechti T, Gagnon G (1993) Scripta Metall Mater 28:58710.1016/0956-716X(93)90201-3 ↗
7. Miller W, Smith CW, Mackenzie DS, Evans KE (2009) J Mater Sci 44:5441. doi: 10.1007/s10853-009-3692-410.1007/s10853-009-3692-4 ↗
8. Evans JSO, Hu Z, Jorgensen JD et al (1997) Science 275(3):6110.1126/science.275.5296.61 ↗
9. Evans JSO, Hu Z, Jorgensen JD, Argyriou DN, Short S, Sleight AW (1997) Science 275:6110.1126/science.275.5296.61 ↗
10. Matsumoto A, Kobayashi K, Nishio T, Ozaki K (2003) Mater Sci Forum 426–432:227910.4028/www.scientific.net/MSF.426-432.2279 ↗
11. Yilmaz S (2002) Compos Sci Technol 62:183510.1016/S0266-3538(02)00104-5 ↗
12. Wu Y, Liu Q, Wang H (2011) J Compos Mater 0021998311420603 [first published on September 21, 2011]
13. Balch DK, Dunand DC (2004) Metall Mater Trans A 35A:115910.1007/s11661-004-1019-2 ↗
14. Hashimoto T, Katsube T, Morito Y (2000) Solid State Commun 116:12910.1016/S0038-1098(00)00302-1 ↗
15. Holzer H, Dunand DC (1999) J Mater Res 14(3):78010.1557/JMR.1999.0104 ↗
16. Gallardo-Amores JM, Amador U, Moran E, Alario-Franco MA (2000) J Inter Inorg Mater 2:12310.1016/S1466-6049(00)00004-0 ↗
17. Chen N, Zhang H, Mingyuan G, Jin Y (2009) J Mater Process Technol 209:147110.1016/j.jmatprotec.2008.03.054 ↗
18. Turner PS (1946) J Res NBS 37:239
19. Vaidy RU, Chawla KK (1994) J Compos Sci Technol 50:1310.1016/0266-3538(94)90122-8 ↗
20. Clyne TW, Withers PJ (1993) An introduction to metal matrix composites. Cambridge University Press, New York10.1017/CBO9780511623080 ↗