Study on hot compressive deformation behaviors and corresponding industrial extrusion of as-homogenized Al–7.82Zn–1.96Mg–2.35Cu–0.11Zr alloy
Source abstract
Abstract
Hot compression tests of an as-homogenized Al–7.82Zn–1.96Mg–2.35Cu–0.11Zr alloy were carried out on a Gleeble-3500 thermo-simulation machine at temperatures varying from 300 to 460 °C and strain rates ranging from 0.001 to 10 s−1. The true stress–strain curves exhibited four cases which represented the competition between work hardening and dynamic softening under different deformation conditions. Arrhenius-type constitutive equation was established to describe flow behaviors and provide the basis for calculating the industrial extrusion parameters. In this study, microstructure evolution of the studied alloy under different deformation temperatures, strain rates, and strains was observed by optical microscopy, transmission electron microscopy, and electron backscatter diffraction. Dynamic recovery, continuous dynamic recrystallization, and discontinuous dynamic recrystallization occurred at high deformation temperatures and low strain rates. Based on processing map, the optimal processing domain was in the strain rate within the limits of 0.001–0.1 s−1 and deformation temperature ranges of 400–450 °C. The industrial extrusion process of the studied alloy was carried out on an extruder with capacity of 3500T, and the results of industrial extrusion were in accordance with the conclusions of hot compression tests. After T6 heat treatment, the studied alloy shows ultimate tensile strength of 700 MPa with elongation of 8.9%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Marlaud T, Deschamps A, Bley F, Lefebvre W, Baroux B (2010) Evolution of precipitate microstructures during the retrogression and re-ageing heat treatment of an Al–Zn–Mg–Cu alloy. Acta Mater 58:4814–482610.1016/j.actamat.2010.05.017 ↗
2. Song RG, Dietzel W, Zhang BJ, Liu WJ, Tseng MK, Atrens A (2004) Stress corrosion cracking and hydrogen embrittlement of an Al–Zn–Mg–Cu alloy. Acta Mater 52:4727–474310.1016/j.actamat.2004.06.023 ↗
3. Marlaud T, Deschamps A, Bley F, Lefebvre W, Baroux B (2010) Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys. Acta Mater 58:248–26010.1016/j.actamat.2009.09.003 ↗
4. Deschamps A, Fribourg G, Bréchet Y, Chemin JL, Hutchinson CR (2012) In situ evaluation of dynamic precipitation during plastic straining of an Al–Zn–Mg–Cu alloy. Acta Mater 60:1905–191610.1016/j.actamat.2012.01.002 ↗
5. Sha G, Wang YB, Liao XZ, Duan ZC, Ringer SP, Langdon TG (2009) Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy. Acta Mater 57:3123–313210.1016/j.actamat.2009.03.017 ↗
6. Liao HC, Wu YN, Zhou KX, Yang J (2015) Hot deformation behavior and processing map of Al–Si–Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation. Mater Des 65:1091–109910.1016/j.matdes.2014.08.021 ↗
7. Wu H, Wen SP, Huang H, Wu XL, Gao KY, Wang W, Nie ZR (2016) Hot deformation behavior and constitutive equation of a new type Al–Zn–Mg–Er–Zr alloy during isothermal compression. Mater Sci Eng A 651:415–42410.1016/j.msea.2015.10.122 ↗
8. Li B, Pan QL, Yin ZM (2014) Characterization of hot deformation behavior of as-homogenized Al–Cu–Li–Sc–Zr alloy using processing maps. Mater Sci Eng A 614:199–20610.1016/j.msea.2014.07.031 ↗
9. Moussa C, Bernacki M, Besnard R, Bozzolo N (2017) Statistical analysis of dislocations and dislocation boundaries from EBSD data. Ultramicroscopy 179:63–7210.1016/j.ultramic.2017.04.005 ↗
10. Prasad YVRK, Gegel HL, Doraivelu SM, Malas JC, Morgan JT, Lark KA, Barker DR (1984) Modeling of dynamic material behavior in hot deformation: forging of Ti-6242. Metall Mater Trans A 15A:1883–189210.1007/BF02664902 ↗
11. Liu WY, Zhao H, Li D, Zhang ZQ, Huang GJ, Liu Q (2014) Hot deformation behavior of AA7085 aluminum alloy during isothermal compression at elevated temperature. Mater Sci Eng A 596:176–18210.1016/j.msea.2013.12.012 ↗
12. Feng D, Zhang XM, Liu SD, Deng YL (2014) Constitutive equation and hot deformation behavior of homogenized Al–7.68Zn–2.12Mg–1.98Cu–0.12Zr alloy during compression at elevated temperature. Mater Sci Eng A 608:63–7210.1016/j.msea.2014.04.055 ↗
13. Lin YC, Li LT, Fu YX, Jiang YQ (2011) Hot compressive deformation behavior of 7075 Al alloy under elevated temperature. J Mater Sci 47:1306–1318. https://doi.org/10.1007/s10853-011-5904-y10.1007/s10853-011-5904-y ↗
14. Yan J, Pan QL, Li AD, Song WB (2017) Flow behavior of Al–6.2Zn–0.70Mg–0.30Mn–0.17Zr alloy during hot compressive deformation based on Arrhenius and ANN models. Trans Nonferrous Met Soc China 27:638–64710.1016/S1003-6326(17)60071-2 ↗
15. Jabbari Taleghani MA, Ruiz Navas EM, Salehi M, Torralba JM (2012) Hot deformation behaviour and flow stress prediction of 7075 aluminium alloy powder compacts during compression at elevated temperatures. Mater Sci Eng A 534:624–63110.1016/j.msea.2011.12.019 ↗
16. Lin YC, Li QF, Xia YC, Li LT (2012) A phenomenological constitutive model for high temperature flow stress prediction of Al–Cu–Mg alloy. Mater Sci Eng A 534:654–66210.1016/j.msea.2011.12.023 ↗
17. Li DF, Zhang DZ, Liu SD, Shan ZJ, Zhang XM, Wang Q, Han SQ (2016) Dynamic recrystallization behavior of 7085 aluminum alloy during hot deformation. Trans Nonferrous Met Soc China 26:1491–149710.1016/S1003-6326(16)64254-1 ↗
18. Jiang H, Dong JX, Zhang MC, Yao ZH (2016) A study on the effect of strain rate on the dynamic recrystallization mechanism of alloy 617B. Metall Mater Trans A 47:5071–508710.1007/s11661-016-3664-7 ↗
19. Zhu RH, Liu Q, Li JF, Xiang S, Chen YL, Zhang XH (2015) Dynamic restoration mechanism and physically based constitutive model of 2050 Al–Li alloy during hot compression. J Alloys Compd 650:75–8510.1016/j.jallcom.2015.07.182 ↗
20. Zhu FJ, Wu HY, Lee S, Lin MC, Chen D (2015) Dynamic behavior of a 6069 Al alloy under hot compression. Mater Sci Eng A 640:385–39310.1016/j.msea.2015.06.026 ↗
21. Gourdet S, Montheillet F (2003) A model of continuous dynamic recrystallization. Acta Mater 51:2685–269910.1016/S1359-6454(03)00078-8 ↗
22. Lee BH, Reddy NS, Yeom JT, Lee CS (2007) Flow softening behavior during high temperature deformation of AZ31Mg alloy. J Mater Process Technol 187–188:766–769
23. Huang K, Logé RE (2016) A review of dynamic recrystallization phenomena in metallic materials. Mater Des 111:548–57410.1016/j.matdes.2016.09.012 ↗
24. Yang QY, Deng ZH, Zhang ZQ, Liu Q, Jia ZH, Huang GJ (2016) Effects of strain rate on flow stress behavior and dynamic recrystallization mechanism of Al–Zn–Mg–Cu aluminum alloy during hot deformation. Mater Sci Eng A 662:204–21310.1016/j.msea.2016.03.027 ↗
25. Yamagata H, Saito N, Otsuka M (2001) Nucleation of new grains during discontinuous dynamic recrystallization of 99.998 mass% Aluminum at 453 K. Scripta Mater 45:1055–106110.1016/S1359-6462(01)01139-3 ↗
26. A. International (2013) ASTM E112-13, Standard test methods for determining average grain size, West Conshohocken, PA
27. Ji GL, Li L, Qin FL, Zhu LY, Li Q (2017) Comparative study of phenomenological constitutive equations for an as-rolled M50NiL steel during hot deformation. J Alloys Compd 695:2389–239910.1016/j.jallcom.2016.11.131 ↗
28. Wang J, Zhao GQ, Chen L, Li JL (2016) A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature. Mater Des 90:91–10010.1016/j.matdes.2015.10.114 ↗
29. He A, Xie GL, Zhang HL, Wang XT (2013) A comparative study on Johnson-Cook, modified Johnson-Cook and Arrhenius-type constitutive models to predict the high temperature flow stress in 20CrMo alloy steel. Mater Des 52:677–68510.1016/j.matdes.2013.06.010 ↗
30. Chen L, Zhao GQ, Yu JQ, Zhang WD (2015) Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process. Mater Des 66:129–13610.1016/j.matdes.2014.10.045 ↗
31. Jiang FL, Zhang H, Su J, Sun YS (2015) Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression. Mater Sci Eng A 636:459–46910.1016/j.msea.2015.03.124 ↗
32. Zener C, Hollomon H (1944) Effect of strain rate upon plastic flow of steel. Appl Phys 15:22–3210.1063/1.1707363 ↗
33. Shi CJ, Mao WM, Chen XG (2013) Evolution of activation energy during hot deformation of AA7150 aluminum alloy. Mater Sci Eng A 571:83–9110.1016/j.msea.2013.01.080 ↗
34. Luo J, Li MQ, Ma DW (2012) The deformation behavior and processing maps in the isothermal compression of 7A09 aluminum alloy. Mater Sci Eng A 532:548–55710.1016/j.msea.2011.10.120 ↗
35. Jiao L, Wang XL, Li H, Zhao YT, Yang YG, Chen JC (2016) High strain rate superplasticity of in situ Al3Zr/6063Al composites. Rare Metal Mater Eng 45:2798–280310.1016/S1875-5372(17)30043-7 ↗
36. Hu H, Wu XZ, Jia ZH, Wang R, Li WG, Liu Q (2016) The structural stability, mechanical properties and stacking fault energy of Al3Zr precipitates in Al–Cu–Zr alloys: HRTEM observations and first-principles calculations. J Alloys Compd 681:96–10810.1016/j.jallcom.2016.04.178 ↗
37. Lv XZ, Zhang JX (2016) Three-dimensional geometry of “square-like” dislocation network in nickel-base single crystal superalloy. J Alloys Compd 688:449–45510.1016/j.jallcom.2016.07.068 ↗
38. Pantleon W, Hansen N (2001) Dislocation boundaries—the distribution function of disorientation angles. Acta Mater 49:1479–149310.1016/S1359-6454(01)00027-1 ↗
39. Hughes DA, Hansen N, Bammann DJ (2003) Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations. Scripta Mater 48:147–15310.1016/S1359-6462(02)00358-5 ↗
40. Liu Y, Geng C, Lin QQ, Xiao YF, Xu JR, Kang W (2017) Study on hot deformation behavior and intrinsic workability of 6063 aluminum alloys using 3D processing map. J Alloys Compd 713:212–22110.1016/j.jallcom.2017.06.066 ↗
41. Wu H, Wen SP, Huang H, Gao KY, Wu XL, Wang W, Nie ZR (2016) Hot deformation behavior and processing map of a new type Al–Zn–Mg–Er–Zr alloy. J Alloys Compd 685:869–88010.1016/j.jallcom.2016.06.254 ↗
42. Li Y, Liu Z, Lin L, Peng J, Ning A (2010) Deformation behavior of an Al–Cu–Mg–Mn–Zr alloy during hot compression. J Mater Sci 46:3708–3715. https://doi.org/10.1007/s10853-010-5143-710.1007/s10853-010-5143-7 ↗
43. Bhimavarapu SB, Maheshwari AK, Bhargava D, Narayan SP (2010) Compressive deformation behavior of Al 2024 alloy using 2D and 4D processing maps. J Mater Sci 46:3191–3199. https://doi.org/10.1007/s10853-010-5203-z10.1007/s10853-010-5203-z ↗
44. Lin YC, Li LT, Xia YC, Jiang YQ (2013) Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy. J Alloys Compd 550:438–44510.1016/j.jallcom.2012.10.114 ↗
45. Anitha Lakshmi A, SrinivasaRao Ch, Gangadhar J, Srinivasu C, Singh SK (2017) Review of processing maps and development of qualitative processing maps. Mater Today Proc 4:946–95610.1016/j.matpr.2017.01.106 ↗
46. Sheppard T (1999) Extrusion of aluminium alloys. Kluwer Academic Publishers, Dordrecht10.1007/978-1-4757-3001-2 ↗
47. Slooff FA, Zhou J, Duszczyk J, Katgerman L (2011) Prediction of pressure required to extrude a wrought magnesium alloy using optimized strain-dependent constitutive parameters. J Mater Process Technol 211:1241–124610.1016/j.jmatprotec.2011.02.004 ↗
48. Stuwe HP (1998) Examples of strain localisation. Springer, Vienna, pp 1–20
49. Lange G (1971) Der Wärmehaushalt beim Strangpressen. Z Metallkd 62:571–579
50. Liu LL, Pan QL, Wang XD, Xiong SW (2018) The effects of aging treatments on mechanical property and corrosion behavior of spray formed 7055 aluminium alloy. J Alloys Compd 735:261–27610.1016/j.jallcom.2017.11.070 ↗
51. A. International (2013) ASTM B221M-13, Standard specification for aluminum and aluminum-alloy extruded bars. Rods, Wire, Profiles, and Tubes (Metric), West Conshohocken, PA
52. Liu B, Lei Q, Xie LQ, Wang MP, Li Z (2016) Microstructure and mechanical properties of high product of strength and elongation Al–Zn–Mg–Cu–Zr alloys fabricated by spray deposition. Mater Des 96:217–22310.1016/j.matdes.2016.02.011 ↗
53. Wen K, Fan YQ, Wang GJ, Jin LB, Li XW, Li ZH, Zhang YA, Xiong BQ (2016) Aging behavior and precipitate characterization of a high Zn-containing Al–Zn–Mg–Cu alloy with various tempers. Mater Des 101:16–2310.1016/j.matdes.2016.03.150 ↗
54. Mazzer EM, Afonso CRM, Galano M, Kiminami CS, Bolfarini C (2013) Microstructure evolution and mechanical properties of Al–Zn–Mg–Cu alloy reprocessed by spray-forming and heat treated at peak aged condition. J Alloys Compd 579:169–17310.1016/j.jallcom.2013.06.055 ↗
55. Teng GB, Liu CY, Ma ZY, Zhou WB, Wei LL, Chen Y, Li J, Mo YF (2018) Effects of minor Sc addition on the microstructure and mechanical properties of 7055 Al alloy during aging. Mater Sci Eng A 713:61–6610.1016/j.msea.2017.12.067 ↗