A study of two refractories as mould materials for investment casting TiAl based alloys
Source abstract
Abstract
Interfacial reactions between Ti-46Al (at.%) casting and ceramic shell mould made of ZrO2 and Al2O3 were studied using a range of techniques. On the surface of the TiAl casting, a reaction layer as thick as 230 μm was found in the case of the zirconia mould, whereas there was no visible reaction layer for the alumina mould. Electron probe microanalysis indicated that elements of the two kinds of shell moulds diffused into the alloy melt during casting but to different extents. Metallographic analysis, microhardness measurements and composition analysis showed that alumina was stable and suitable for use as shell moulds when casting TiAl based alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. D. E. LARSEN, L. CHRISTODOULOU, S. L. KAMPE and P. SADLER, Mater. Sci. Eng. A 144 (1991) 45.10.1016/0921-5093(91)90208-5 ↗
2. Y. W. KIM, JOM July (1989) 24.10.1007/BF03220267 ↗
3. D. M. DIMIDUK, in Gamma Titanium Aluminides, edited by Y.-W. KIM, R. WAGNER and M. Yamaguchi (TMS, Warrendale, PA, 1995) p 3.
4. C. M. AUSTIN and T. J. KELLY, in Gamma Titanium Aluminides, edited by Y.-W. Kim, R. Wagner and M. Yamaguchi (TMS, Warrendale, PA, 1995) 21.
5. F. H. FROES, C. SURYANARAYANA and D. ELIEZER, J. Mater. Sci. 27 (1992) 5113.10.1007/BF02403806 ↗
6. SRIVATS V. RAM and J. R. BARRETT, in Titanium’95: Science and Technology, edited by P. A. Blenkinsop, W. J. Evans and H. M. Flower (IOM, London, 1996) 88.
7. J. P. KUANG, R. A. HARDING and J. CAMPBELL, Mater. Sci. Technol. 16 (2000) 1007.10.1179/026708300101508964 ↗
8. J. F. WANG, J. N. WANG and J. YANG, Spec. Cast. & Nonferrous Alloys 5 (2002) 40.
9. M. G. KIM, T. K. KIM, T. W. HONG, S. K. KIM and Y. J. KIM, J. Kor. Inst. Met. & Mater. 40 (2001) 429.
10. Q. JIA, Y. Y. CUI and R. YANG, Mater. Sci. Forum 426–432 (2003) 1643.10.4028/www.scientific.net/MSF.426-432.1643 ↗
11. Q. JIA, Y. Y. CUI and R. YANG, Idem Inter. J. Cast Metals Res. 17 (2004) 23.10.1179/136404604225014800 ↗
12. A. R. MIEDEMA, P. F. DE CHÂTEL and F. R. DE BOER, Physics B 100 (1980) 1.10.1016/0378-4363(80)90054-6 ↗
13. A. K. NIESSEN, F. R. DE BOER, R. BOOM, P. F. DE CHÂTEL and W. C. M. MATTENS, Calphad 7 (1983) 51.10.1016/0364-5916(83)90030-5 ↗
14. Q. JIA, PhD Thesis, Institute of Metal Research, CAS, Shenyang, 2004.
15. A. JAY and K. MISRA, Metall. Trans. A 22 (1991) 715.10.1007/BF02670294 ↗
16. R. E. TRESSLER, T. L. MOORE and R. L. CRANE, J. Mater. Sci. 8 (1973) 151.10.1007/BF00550662 ↗
17. J. H. SELVERIAN, F. S. OHUCHI, M. BORTZ and M. R. NOTIS, J. Mater. Sci. 26 (1991) 6300.10.1007/BF02387808 ↗
18. Y. KOBAYASHI and F. TSUKIHASHI, High Temp. Mater. Processes 19 (2000) 211.10.1515/HTMP.2000.19.3-4.211 ↗