Sol–gel-based coatings for oxidation protection of TiAl alloys
Source abstract
Abstract
The low density, high specific strength, and good creep properties make TiAl alloys being promising high-temperature structural materials in aerospace and automotive industries. However, the insufficient oxidation resistance limits their extensive practical applications . It is the intention of this review to illustrate the mechanism and development of sol–gel-based coatings, a surface modification approach for oxidation protection of TiAl alloys, but not to present a general review on the oxidation protection of TiAl alloys. The oxidation behavior and mechanism of TiAl alloys were addressed briefly. The discussion focused mainly on the sol–gel coatings preparation method and generation mechanism. Finally, the development trend of sol–gel-based coatings for high-temperature oxidation of TiAl alloys was prospected.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Clemens H, Kestler H (2000) Processing and applications of intermetallic γ-TiAl-based alloys. Adv Eng Mater 2:551–57010.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
2. Leyens C, Peters M (2006) Titanium and titanium alloys: fundamentals and applications. Wiley, New York
3. Clemens H, Mayer S (2013) Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys. Adv Eng Mater 15:191–21510.1002/adem.201200231 ↗
4. Pflumm R, Friedle S, Schuetze M (2015) Oxidation protection of gamma-TiAl-based alloys—a review. Intermetallics 56:1–1410.1016/j.intermet.2014.08.002 ↗
5. Appel F, Clemens H, Fischer F (2016) Modeling concepts for intermetallic titanium aluminides. Prog Mater Sci 81:55–12410.1016/j.pmatsci.2016.01.001 ↗
6. Bewlay BP, Nag S, Suzuki A, Weimer MJ (2016) TiAl alloys in commercial aircraft engines. Mater High Temp 33:549–55910.1080/09603409.2016.1183068 ↗
7. Schüetze M, Quadakkers WJ (2017) Future directions in the field of high-temperature corrosion research. Oxid Met 87:681–70410.1007/s11085-017-9719-3 ↗
8. Zeng SW, Zhao AM, Jiang HT, Luo L, He F, Li X, Ren YS (2018) Evolution of surface morphology of oxide formed during initial-stage oxidation of gamma-TiAl alloy using in situ environmental SEM. Oxid Met 90:649–65510.1007/s11085-018-9862-5 ↗
9. Qu SJ, Tang SQ, Feng AH, Feng C, Shen J, Chen DL (2018) Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy. Acta Mater 148:300–31010.1016/j.actamat.2018.02.013 ↗
10. Maurice V, Despert G, Zanna S, Josso P, Bacos MP, Marcus P (2007) XPS study of the initial stages of oxidation of α2-Ti3Al and γ-TiAl intermetallic alloys. Acta Mater 55:3315–332510.1016/j.actamat.2007.01.030 ↗
11. Wang L, Shang J-X, Wang F-H, Chen Y, Zhang Y (2013) Oxygen adsorption on γ-TiAl surfaces and the related surface phase diagrams: a density-functional theory study. Acta Mater 61:1726–173810.1016/j.actamat.2012.11.047 ↗
12. Dettenwanger F, Schumann E, RÜhle M, Rakowski J, Meier GH (1994) The effect of nitrogen on the oxidation of TiAl. MRS Online Proc Libr Arch 364:981–98610.1557/PROC-364-981 ↗
13. Rakowski J, Pettit F, Meier G, Dettenwanger F, Schumann E, Ruhle M (1995) The effect of nitrogen on the oxidation of γ-TiAl. Scr Metall Mater 33:997–100310.1016/0956-716X(95)00312-J ↗
14. Zheng N, Quadakkers WJ, Gil A, Nickel H (1995) Studies concerning the effect of nitrogen on the oxidation behavior of TiAl-based intermetallics at 900°C. Oxid Met 44:477–49910.1007/BF01051039 ↗
15. Lang C, Schütze M (1996) TEM investigations of the early stages of TiAl oxidation. Oxid Met 46:255–28510.1007/BF01050799 ↗
16. Lu W, Chen C, Xi Y, Guo C, Wang F, He L (2007) TEM investigation of the oxide scale of Ti–46.5Al–5Nb at 900 °C for 50 h. Intermetallics 15:824–83110.1016/j.intermet.2006.10.014 ↗
17. Beye RW, Gronsky R (1994) Novel phases in the oxidation of γ-titanium aluminum. Acta Metall Mater 42:1373–138110.1016/0956-7151(94)90155-4 ↗
18. Cheng YF, Dettenwanger F, Mayer J, Schumann E, Rühle M (1996) Identification of a new phase formed during the oxidation of γ-titanium aluminum. Scr Mater 34:707–71110.1016/1359-6462(95)00552-8 ↗
19. Shemet V, Karduck P, Hoven H, Grushko B, Fischer W, Quadakkers WJ (1997) Synthesis of the cubic Z-phase in the Ti-Al-O system by a powder metallurgical method. Intermetallics 5:271–28010.1016/S0966-9795(96)00091-X ↗
20. Dai JJ, Zhu JY, Chen CZ, Weng F (2016) High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review. J Alloys Compd 685:784–79810.1016/j.jallcom.2016.06.212 ↗
21. Wu X (2006) Review of alloy and process development of TiAl alloys. Intermetallics 14:1114–112210.1016/j.intermet.2005.10.019 ↗
22. Garip Y, Ozdemir O (2019) Comparative study of the oxidation and hot corrosion behaviors of TiAl–Cr intermetallic alloy produced by electric current activated sintering. J Alloys Compd 780:364–37710.1016/j.jallcom.2018.11.324 ↗
23. Naveed M, Renteria AF, Weiß S (2017) Role of alloying elements during thermocyclic oxidation of β/γ-TiAl alloys at high temperatures. J Alloys Compd 691:489–49710.1016/j.jallcom.2016.08.259 ↗
24. Zhang L, Xiao W-H, Jiang H-R (2006) Morphology and formation of high-temperature oxide films of Ti Al alloys. Chin J Nonferrous Met 16:899–903
25. Shida Y, Anada H (1996) The effect of various ternary additives on the oxidation behavior of TiAl in high-temperature air. Oxid Met 45:197–21910.1007/BF01046826 ↗
26. Taniguchi S, Shibata T (1996) Influence of additional elements on the oxidation behaviour of TiAl. Intermetallics 4(Supplement 1):S85–S9310.1016/0966-9795(96)00017-9 ↗
27. Lin JP, Zhao LL, Li GY, Zhang LQ, Song XP, Ye F, Chen GL (2011) Effect of Nb on oxidation behavior of high Nb containing TiAl alloys. Intermetallics 19:131–13610.1016/j.intermet.2010.08.029 ↗
28. Brotzu A, Felli F, Pilone D (2014) Effect of alloying elements on the behaviour of TiAl-based alloys. Intermetallics 54:176–18010.1016/j.intermet.2014.06.007 ↗
29. Durda E, Przybylski K (2016) Oxidation behavior of Ti–46Al–8Nb alloy with boron and carbon addition under thermal cycling conditions. Intermetallics 71:51–5610.1016/j.intermet.2015.12.015 ↗
30. Yoshihara M, Miura K (1995) Effects of Nb addition on oxidation behavior of TiAl. Intermetallics 3:357–36310.1016/0966-9795(95)94254-C ↗
31. Jiang H, Hirohasi M, Lu Y, Imanari H (2002) Effect of Nb on the high temperature oxidation of Ti–(0–50 at.%)Al. Scr Mater 46:639–64310.1016/S1359-6462(02)00042-8 ↗
32. Tetsui T, Ono S (1999) Endurance and composition and microstructure effects on endurance of TiAl used in turbochargers. Intermetallics 7:689–69710.1016/S0966-9795(98)00085-5 ↗
33. Copland EH, Gleeson B, Young DJ (1999) Formation of Z-Ti50Al30O20 in the sub-oxide zones of γ-TiAl-based alloys during oxidation at 1000 °C. Acta Mater 47:2937–294910.1016/S1359-6454(99)00169-X ↗
34. Dettenwanger F, Schumann E, Ruhle M, Rakowski J, Meier GH (1998) Microstructural study of oxidized γ-TiAl. Oxid Met 50:269–30710.1023/A:1018892422121 ↗
35. Kawaura H, Kawahara H, Nishino K, Saito T (2002) New surface treatment using shot blast for improving oxidation resistance of TiAl-base alloys. Mater Sci Eng A 329–331:589–59510.1016/S0921-5093(01)01585-4 ↗
36. Huang Y, Peng X, Dong Z, Cui Y (2018) Thermal growth of exclusive alumina scale on a TiAl based alloy: shot peening effect. Corros Sci 143:76–8310.1016/j.corsci.2018.08.024 ↗
37. Kanjer A, Optasanu V, Marco de Lucas MC, Heintz O, Geoffroy N, François M, Berger P, Montesin T, Lavisse L (2018) Improving the high temperature oxidation resistance of pure titanium by shot-peening treatments. Surf Coat Technol 343:93–10010.1016/j.surfcoat.2017.10.065 ↗
38. Taniguchi S, Shibata T, Murakami A, Chihara K (1994) Improvement in the oxidation resistance of TiAl by preoxidation in a Cr2O3 powder pack. Mater Trans JIM 35:616–62210.2320/matertrans1989.35.616 ↗
39. Taniguchi S, Shibata T, Sakon S (1992) Improvement in oxidation resistance of TiAl by preoxidation at 1200 K in a pack mixture of Cr2O3 and Cr powders. Zairyo-to-Kankyo 41:453–46010.3323/jcorr1991.41.453 ↗
40. Taniguchi S, Shibata A, Murakami A, Chihara K (1994) Improvement in the oxidation resistance of TiAl by preoxidation in a TiO2-powder pack. Oxid Met 42:17–2910.1007/BF01061922 ↗
41. Sun P, Zhang L, Zhang L, Lin J (2012) Improvement in the liquid zinc corrosion resistance of high Nb–TiAl alloys by pre-oxidation in a SiO 2-powder pack. Sci China Technol Sci 55:505–50910.1007/s11431-011-4700-x ↗
42. Suzuki T, Goto M, Yoshihara M, Tanaka R (1991) Improvement in oxidation resistance of the Ti-31 ∼ 39 mass% Al alloys by heat treatment under a low partial pressure oxygen atmosphere. Mater Trans JIM 32:1017–102310.2320/matertrans1989.32.1017 ↗
43. Xin L, Shao G, Wang F, Tsakiropoulos P, Li T (2003) Improving high-temperature oxidation resistance of TiAl-based alloys by MnCl2 surface treatment. Intermetallics 11:651–66010.1016/S0966-9795(03)00063-3 ↗
44. Gil A, Żurek Z, Stawiarski A, Dąbek J (2012) Improvement of oxidation resistance of TiAl–Nb alloy by dipping in F-containing resin. Adv Mater Res 347–353:3514–3517
45. Donchev A, Richter E, Schütze M, Yankov R (2008) Improving the oxidation resistance of TiAl-alloys with fluorine. J Alloys Compd 452:7–1010.1016/j.jallcom.2006.12.157 ↗
46. Friedle S, Nießen N, Braun R, Schütze M (2012) Thermal barrier coatings on γ-TiAl protected by the halogen effect. Surf Coat Technol 212:72–7810.1016/j.surfcoat.2012.09.021 ↗
47. Laska N, Friedle S, Braun R, Schütze M (2016) Lifetime of 7YSZ thermal barrier coatings deposited on fluorine-treated γ-TiAl-based TNM-B1 alloy. Mater Corros 67:1185–119410.1002/maco.201608918 ↗
48. Schütze M, Schumacher G, Dettenwanger F, Hornauer U, Richter E, Wieser E, Möller W (2002) The halogen effect in the oxidation of intermetallic titanium aluminides. Corros Sci 44:303–31810.1016/S0010-938X(01)00062-2 ↗
49. Friedle S, Pflumm R, Seyeux A, Marcus P, Schütze M (2018) ToF-SIMS study on the initial stages of the halogen effect in the oxidation of TiAl alloys. Oxid Met 89:123–13910.1007/s11085-017-9779-4 ↗
50. Donchev A, Gleeson B, Schütze M (2003) Thermodynamic considerations of the beneficial effect of halogens on the oxidation resistance of TiAl-based alloys. Intermetallics 11:387–39810.1016/S0966-9795(03)00003-7 ↗
51. Schütze M (2017) The role of surface protection for high-temperature performance of TiAl alloys. JOM 69:2602–260910.1007/s11837-017-2595-0 ↗
52. Mo M-H, Wu L-K, Cao H-Z, Lin J-P, Zheng G-Q (2016) Improvement of the high temperature oxidation resistance of Ti–50Al at 1000 °C by anodizing in ethylene glycol/BmimPF6 solution. Surf Coat Technol 286:215–22210.1016/j.surfcoat.2015.12.041 ↗
53. Mo M-H, Wu L-K, Cao H-Z, Lin J-P, Lu D-H, Zheng G-Q (2016) High temperature oxidation behavior and anti-oxidation mechanism of Ti–50Al anodized in ionic liquid. Surf Coat Technol 307:190–19910.1016/j.surfcoat.2016.08.084 ↗
54. Mo M-H, Wu L-K, Cao H-Z, Lin J-P, Zheng G-Q (2017) Halogen effect for improving high temperature oxidation resistance of Ti–50Al by anodization. Appl Surf Sci 407:246–25410.1016/j.apsusc.2017.02.194 ↗
55. Wu L-K, Xia J-J, Cao H-Z, Liu W-J, Hou G-Y, Tang Y-P, Zheng G-Q (2018) Improving the high-temperature oxidation resistance of TiAl alloy by anodizing in methanol/NaF solution. Oxid Met 90:617–63110.1007/s11085-018-9858-1 ↗
56. Xia J-J, Niu H-Z, Liu M, Cao H-Z, Zheng G-Q, Wu L-K (2019) Enhancement of high temperature oxidation resistance of Ti48Al5Nb alloy via anodic anodization in NH4F containing ethylene glycol. J Chin Soc Corros Prot 39:96–105
57. Bennett MJ, Tuson AT (1989) Improved high temperature oxidation behaviour of alloys by ion implantation. Mater Sci Eng A 116:79–8710.1016/0921-5093(89)90131-7 ↗
58. Stroosnijder MF (1998) Ion implantation for high temperature corrosion protection. Surf Coat Technol 100:196–20110.1016/S0257-8972(97)00613-0 ↗
59. Taniguchi S, Uesaki K, Zhu YC, Matsumoto Y, Shibata T (1999) Influence of implantation of Al, Si, Cr or Mo ions on the oxidation behaviour of TiAl under thermal cycle conditions. Mater Sci Eng A 266:267–27510.1016/S0921-5093(99)00042-8 ↗
60. Hornauer U, Richter E, Matz W, Reuther H, Mücklich A, Wieser E, Möller W, Schumacher G, Schütze M (2000) Microstructure and oxidation kinetics of intermetallic TiAl after Si- and Mo-ion implantation. Surf Coat Technol 128–129:418–42210.1016/S0257-8972(00)00644-7 ↗
61. Li XY, Taniguchi S, Zhu YC, Fujita K, Iwamoto N, Matsunaga Y, Nakagawa K (2001) Oxidation behavior of TiAl protected by Si + Nb combined ion implantation. Intermetallics 9:443–44910.1016/S0966-9795(01)00024-3 ↗
62. Taniguchi S, Zhu Y-C, Fujita K, Iwamoto N (2002) TEM observations of the initial oxidation stages of Nb-ion-implanted TiAl. Oxid Met 58:375–39010.1023/A:1020115006816 ↗
63. Li XY, Taniguchi S (2005) Oxidation behavior of a γ-TiAl-based alloy implanted by silicon and/or carbon. Mater Sci Eng A 398:268–27410.1016/j.msea.2005.03.025 ↗
64. Taniguchi S, Kuwayama T, Zhu YC, Matsumoto Y, Shibata T (2000) Influence of silicon ion implantation and post-implantation annealing on the oxidation behaviour of TiAl under thermal cycle conditions. Mater Sci Eng A 277:229–23610.1016/S0921-5093(99)00542-0 ↗
65. Yankov RA, Kolitsch A, von Borany J, Munnik F, Gemming S, Alexewicz A, Bracht H, Roesner H, Donchev A, Schuetze M (2014) Microstructural studies of fluorine-implanted titanium aluminides for enhanced environmental durability. Adv Eng Mater 16:52–5910.1002/adem.201300071 ↗
66. Kim JP, Jung HG, Kim KY (1999) Al + Y codeposition using EB-PVD method for improvement of high-temperature oxidation resistance of TiAl. Surf Coat Technol 112:91–9710.1016/S0257-8972(98)00787-7 ↗
67. Jung HG, Wee DM, Oh MH, Kim KY (2001) An Al + Y coating process for improvement of the high-temperature oxidation resistance of a TiAl alloy. Oxid Met 55:189–20810.1023/A:1010399825117 ↗
68. Swadzba L, Maciejny A, Mendala B, Moskal G, Jarczyk G (2003) Structure and resistance to oxidation of an Al–Si diffusion coating deposited by Arc-PVD on a TiAlCrNb alloy. Surf Coat Technol 165:273–28010.1016/S0257-8972(02)00742-9 ↗
69. Goral M, Swadzba L, Moskal G, Hetmanczyk M, Tetsui T (2009) Si-modified aluminide coatings deposited on Ti46Al7Nb alloy by slurry method. Intermetallics 17:965–96710.1016/j.intermet.2009.04.006 ↗
70. Swadźba R, Swadźba L, Mendala B, Witala B, Tracz J, Marugi K, Pyclik Ł (2017) Characterization of Si-aluminide coating and oxide scale microstructure formed on γ-TiAl alloy during long-term oxidation at 950 & #xB0;C. Intermetallics 87:81–8910.1016/j.intermet.2017.04.015 ↗
71. Zhou C, Xu H, Gong S, Yang Y, Kim KY (2000) A study on aluminide and Cr-modified aluminide coatings on TiAl alloys by pack cementation method. Surf Coat Technol 132:117–12310.1016/S0257-8972(00)00911-7 ↗
72. Nishimoto T, Izumi T, Hayashi S, Narita T (2003) Two-step Cr and Al diffusion coating on TiAl at high temperatures. Intermetallics 11:225–23510.1016/S0966-9795(02)00233-9 ↗
73. Tang Z, Wang F, Wu W (1999) Effect of a sputtered TiAlCr coating on hot corrosion resistance of gamma-TiAl. Intermetallics 7:1271–127410.1016/S0966-9795(99)00044-8 ↗
74. Zhou C, Yang Y, Gong S, Xu H (2001) Effect of Ti–Al–Cr coatings on the high temperature oxidation behavior of TiAl alloys. Mater Sci Eng A 307:182–18710.1016/S0921-5093(00)01956-0 ↗
75. Lee JK, Oh MH, Wee DM (2002) Long-term oxidation properties of Al–Ti–Cr two-phase alloys as coating materials for TiAl alloys. Intermetallics 10:347–35210.1016/S0966-9795(02)00006-7 ↗
76. Ebach-Stahl A, Eilers C, Laska N, Braun R (2013) Cyclic oxidation behaviour of the titanium alloys Ti-6242 and Ti-17 with Ti–Al–Cr–Y coatings at 600 and 700 °C in air. Surf Coat Technol 223:24–3110.1016/j.surfcoat.2013.02.021 ↗
77. Dudziak T, Datta P, Du H, Ross I (2013) High temperature air oxidation resistance of TiAlCr-Y coated Ti45Al8Nb between 750 °C–950°C. Open Eng 3:722–73110.2478/s13531-013-0132-7 ↗
78. Sadeq FO, Sharifitabar M, Afarani MS (2018) Synthesis of Ti–Si–Al coatings on the surface of Ti–6Al–4V alloy via hot dip siliconizing route. Surf Coat Technol 337:349–35610.1016/j.surfcoat.2018.01.037 ↗
79. Dai JJ, Li SY, Zhang HX, Yu HJ, Chen CZ, Li Y (2018) Microstructure and high-temperature oxidation resistance of Ti–Al–Nb coatings on a Ti–6Al–4V alloy fabricated by laser surface alloying. Surf Coat Technol 344:479–48810.1016/j.surfcoat.2018.03.060 ↗
80. Tang ZL, Wang FH, Wu WT (1998) Effect of MCrAlY overlay coatings on oxidation resistance of TiAl intermetallics. Surf Coat Technol 99:248–25210.1016/S0257-8972(97)00563-X ↗
81. Padture NP, Gell M, Jordan EH (2002) Thermal barrier coatings for gas-turbine engine applications. Science 296:280–28410.1126/science.1068609 ↗
82. Cheng YX, Wang W, Zhu SL, Xin L, Wang FH (2010) Arc ion plated-Cr2O3 intermediate film as a diffusion barrier between NiCrAlY and γ-TiAl. Intermetallics 18:736–73910.1016/j.intermet.2009.10.009 ↗
83. Kim D, Seo D, Huang X, Yang Q, Kim Y-W (2012) Cyclic oxidation behavior of a beta gamma powder metallurgy TiAl–4Nb–3Mn alloy coated with a NiCrAlY coating. Surf Coat Technol 206:3048–305410.1016/j.surfcoat.2011.12.004 ↗
84. Gong X, Chen RR, Yang YH, Wang Y, Ding HS, Guo JJ, Su YQ, Fu HZ (2018) Effect of Mo on microstructure and oxidation of NiCoCrAlY coatings on high Nb containing TiAl alloys. Appl Surf Sci 431:81–9210.1016/j.apsusc.2017.07.026 ↗
85. Ding Z, Miao Q, Liang W, Yang Z, Lin H (2018) Isothermal oxidation behavior of NiCoCrAlY/ZrO2 composite coating on γ-TiAl alloy. Mater Res Express 5:06652410.1088/2053-1591/aac996 ↗
86. Zhang K, Zhang T, Song L (2018) Oxidation behavior of a high-Nb-containing TiAl alloy with multilayered thermal barrier coatings. J Therm Spray Technol 27:999–101010.1007/s11666-018-0736-9 ↗
87. Wang DQ, Shi ZY, Teng YL (2005) Microstructure and oxidation of hot-dip aluminized titanium at high temperature. Appl Surf Sci 250:238–24610.1016/j.apsusc.2005.01.002 ↗
88. Zhang Z, Teng X, Mao Y, Cao C, Wang S, Wang L (2010) Improvement of oxidation resistance of γ-TiAl at 900 and 1000 °C through hot-dip aluminizing. Oxid Met 73:455–46610.1007/s11085-009-9187-5 ↗
89. Zhang ZG, Wang YJ, Xiao LJ, Zhang LQ, Su Y, Lin JS (2012) High-temperature oxidation of hot-dip aluminizing coatings on a Ti3Al–Nb alloy and the effects of element additions. Corros Sci 64:137–14410.1016/j.corsci.2012.07.009 ↗
90. Jeng S-C (2013) Oxidation behavior and microstructural evolution of hot-dipped aluminum coating on Ti–6Al–4V alloy at 800 °C. Surf Coat Technol 235:867–87410.1016/j.surfcoat.2013.09.023 ↗
91. Xiang ZD, Rose S, Datta PK (2002) Pack deposition of coherent aluminide coatings on γ-TiAl for enhancing its high temperature oxidation resistance. Surf Coat Technol 161:286–29210.1016/S0257-8972(02)00469-3 ↗
92. Goral M, Moskal G, Swadzba L (2009) Gas phase aluminizing of TiAl intermetallics. Intermetallics 17:669–67110.1016/j.intermet.2009.01.015 ↗
93. Chu MS, Wu SK (2003) The improvement of high temperature oxidation of Ti–50Al by sputtering Al film and subsequent interdiffusion treatment. Acta Mater 51:3109–312010.1016/S1359-6454(03)00123-X ↗
94. Chu MS, Wu SK (2004) Improvement in the oxidation resistance of α2-Ti3Al by sputtering Al film and subsequent interdiffusion treatment. Surf Coat Technol 179:257–26410.1016/S0257-8972(03)00819-3 ↗
95. Liu Z, Wang G (2005) Improvement of oxidation resistance of γ-TiAl at 800 and 900 °C in air by TiAl2 coatings. Mater Sci Eng A 397:50–5710.1016/j.msea.2005.01.027 ↗
96. Zhang Z, Peng Y, Mao Y, Hou C, Xu L (2011) Hot-dip aluminizing fabrication of TiAl3 coating on TA15 alloy and its high temperature oxidation behaviors. High Temp Mater PR-ISR 30:519–525
97. Lee JK, Oh MH, Lee HK, Wee DM (2004) Plasma-sprayed Al–21Ti–23Cr coating for oxidation protection of TiAl alloys. Surf Coat Technol 182:363–36910.1016/j.surfcoat.2003.08.063 ↗
98. Liang W, Zhao XG (2001) Improving the oxidation resistance of TiAl-based alloy by siliconizing. Scr Mater 44:1049–105410.1016/S1359-6462(01)00675-3 ↗
99. Li XY, Taniguchi S, Matsunaga Y, Nakagawa K, Fujita K (2003) Influence of siliconizing on the oxidation behavior of a γ-TiAl based alloy. Intermetallics 11:143–15010.1016/S0966-9795(02)00193-0 ↗
100. Gray S, Jacobs MH, Ponton CB, Voice W, Evans HE (2004) A method of heat-treatment of near γ-TiAl to enhance oxidation resistance by the formation of a Ti5Si3 layer. Mater Sci Eng A 384:77–8210.1016/S0921-5093(04)00868-8 ↗