journal article·2011-07Open access

Dynamic constitutive behavior of Hastelloy X under thermo-mechanical loads

Sandeep Abotula, Arun Shukla, Ravi Chona

Journal of Materials Science· Volume 46· Issue 14

Abstract

An experimental investigation has been conducted to study the dynamic constitutive behavior of Hastelloy X (AMS 5754) at room and elevated temperatures under varying rates of loading. A split Hopkinson pressure bar (SHPB) apparatus was used in conjunction with an induction coil heating system for applying dynamic loads at elevated temperatures. Experiments were carried out at different temperatures ranging from room temperature (25 °C) to 1,100 °C at an average strain rate of 5000/s. Room temperature experiments were carried out at varying strain rates from 1000 to 4000/s. The results show that as the strain rate increases from quasi-static to 4000/s, the yield strength increases by approximately 50%. Also, under dynamic loading, the yield stress decreases with temperature up to 700 °C, after which it shows a peak at 900 °C before beginning to decrease again as the temperature is further increased. The Johnson–Cook model was used to predict the dynamic plastic response under varying rates of loading and at different temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Energetic Materials and Combustion · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Lai GY (1978) Metall Mater Trans A 9:82710.1007/BF02649792 ↗
2. Yasuo K, Kiyoshi F, Kazuhiko K, Yoshiaki M (1988) Metall Mater Trans A 19:126910.1007/BF02662588 ↗
3. An unknown copy (1998) Mil-Handbook-5H
4. Swindeman RW, Brinkman CR (1981) In: Technical report, ASME PVP conference, Denver, CO
5. Aghaie-Khafri M, Golarzi N (2007) Mater Sci Eng A 486:64110.1016/j.msea.2007.11.059 ↗
6. Zhao JC, Larsen M, Ravikumar V (2000) Mater Sci Eng A 293:11210.1016/S0921-5093(00)01049-2 ↗
7. Hong HU, Kim IS, Choi BG, Jeong C, Jo Y (2008) Mater Lett 62:435110.1016/j.matlet.2008.07.032 ↗
8. Krompholz K, Grosser ED, Ewert K (2004) Materialwiss Werkstofftech 13:23610.1002/mawe.19820130704 ↗
9. Rowley MA, Thornton EA (1996) J Eng Mater Technol 118:1910.1115/1.2805928 ↗
10. Kolsky H (1949) Proc Phys Soc 62:67610.1088/0370-1301/62/11/302 ↗
11. Milani AS, Dabboussi W, Nemes JA, Abeyaratne RC (2009) Int J Impact Eng 36:29410.1016/j.ijimpeng.2008.02.003 ↗
12. Johnson GR, Cook WH (1983) In: Proceedings of seventh international symposium on ballistics, The Hague, The Netherlands, pp 541–547
13. Hou QY, Wang JT (2010) Comput Mater Sci. doi: 10.1016/j.commatsci.2010.07.01810.1016/j.commatsci.2010.07.018 ↗
14. Bettge D, Osterle W, Ziebs J (1995) Scr Metall Mater 32:160110.1016/0956-716X(95)00243-O ↗
15. Sajjadi SA, Zebarjad SM (2006) J Achiev Mater Manuf Eng 18:227
16. Sajjadi SA, Zebarjad SM (2006) J Achiev Mater Manuf Eng 28:34
17. Sieborger D, Knake H, Glatzel G (2001) Mater Sci Eng A 298:2610.1016/S0921-5093(00)01318-6 ↗
18. Sajjadi SA, Nategh S, Isac M, Zebarjad SM (2004) J Mater Process Technol 155–156:190010.1016/j.jmatprotec.2004.04.273 ↗
19. Matthews SJ, Greentown, Klein HJ, Hodge FG (1978) US Patent 4129464
20. Petronic S, Milosavljevic A (2007) FME Trans 35:189
21. Claudson TT, Westerman RE (1965) An evaluation of the corrosion resistance of several high temperature alloys for nuclear applications. Metallurgy Research Section, Reactor and Materials Technology Department. AEC Research and Development Report, Atomic Energy Commission10.2172/4576573 ↗
22. Samantaray D, Mandal S, Bhaduri AK (2009) Comput Mater Sci 47:56810.1016/j.commatsci.2009.09.025 ↗