Microstructure of high velocity oxy-fuel sprayed Ti2AlC coatings
Source abstract
Abstract
The microstructure formation and phase transformations in Ti2AlC-rich coatings deposited by High Velocity Oxy-fuel spraying of Maxthal 211(A (R)) powders is presented. High resolution electron microscopy analysis, using both scanning and transmission electron microscopy with energy dispersive spectrometry and energy filtering, combined with X-ray diffraction reveals that the coatings consist of Ti2AlC grains surrounded by regions of very small TiC grains embedded in Ti (x) Al (y) . The composition of the Ti (x) Al (y) depends on its surrounding and varies with size and distribution of the adjacent TiC grains. Impact of spray parameters on coating microstructure is also discussed. Two spray parameters were varied; powder size distribution and flame power. They were found to greatly affect the coating microstructure. Increasing powder size and decreasing flame power increase the amount of Ti2AlC, but produces thinner coatings with lower cohesion. Larger powder size will also decrease oxygen incorporation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Barsoum MW (2000) Prog Solid State Chem 28:20110.1016/S0079-6786(00)00006-6 ↗
2. Sundberg M, Malmqvist G, Magnusson A, El-Raghy T (2004) Ceram Int 30:189910.1016/j.ceramint.2003.12.046 ↗
3. Byeon J, Liu J, Hopkins M, Fischer W, Garimella N, Park K, Brady M, Radovic M, El-Raghy T, Sohn Y (2007) Oxid Met 68:9710.1007/s11085-007-9063-0 ↗
4. Wang X, Zhou Y (2003) Oxid Met 59:30310.1023/A:1023092027697 ↗
5. Zhou W, Mei B, Zhu J, Hong X (2005) Mater Lett 59:13110.1016/j.matlet.2004.07.052 ↗
6. Wilhelmsson O, Palmquist J, Lewin E, Emmerlich J, Eklund P, Persson P, Högberg H, Li S, Ahuja R, Eriksson O, Hultman L, Jansson U (2006) J Cryst Growth 291:29010.1016/j.jcrysgro.2006.03.008 ↗
7. Rosén J, Ryves L, Persson POA, Bilek MMM (2007) J Appl Phys 101:05610110.1063/1.2709571 ↗
8. Mao Z, Ma J, Wang J, Sun B (2009) J Mater Sci 44:3265. doi: 10.007/s10853-00903438-310.1007/s10853-009-3438-3 ↗
9. Pasumarthi V, Chen Y, Bakshi SR, Agarwal A (2009) J Alloy Compd 484:11310.1016/j.jallcom.2009.04.079 ↗
10. Frodelius J, Sonestedt M, Björklund S, Palmquist JP, Stiller K, Högberg H, Hultman L (2008) Surf Coat Technol 202:597610.1016/j.surfcoat.2008.06.184 ↗
11. Davis J (2004) Handbook of thermal spray technology. ASM International, Ohio, USA
12. Kaufold RW, Rotolico AJ, Nerz J, Kushner BA (1991) In: Thermal spray research and applications: proceedings of the 3rd national thermal spray conference, Long Beach, California, May 1990, ASM International, pp 20–25
13. Mauer G, Vaßen R, Stöver D (2007) J Therm Spray Technol 16:41410.1007/s11666-007-9047-2 ↗
14. Thomas PJ, Midgley PA (2002) Top Catal 21:10910.1023/A:1021377125838 ↗
15. Hofer F, Warbichler P, Grogger W (1995) Ultramicroscopy 59:1510.1016/0304-3991(95)00015-S ↗
16. Hofer F, Warbichler P, Grogger W, Lang O (1995) Micron 26:37710.1016/0968-4328(95)00016-X ↗
17. Liu F, Josefsson H, Svensson JE, Johansson LG, Halvarsson M (2005) Mater High Temp 22:52110.3184/096034005782744119 ↗
18. Kothleitner G, Rogers M, Berendes A, Bock W, Kolbesen BO (2005) Appl Surf Sci 252:6610.1016/j.apsusc.2005.02.013 ↗
19. Brunauer S, Emmet PH, Teller E (1938) J Am Chem Soc 60:30910.1021/ja01269a023 ↗
20. Wang ZL, Van Heerden D, Josell D, Shapiro AJ (1997) J Res Natl Inst Stand Technol 102:110.6028/jres.102.002 ↗
21. Williams DB, Carter CB (1996) Transmission electron microscopy. Plenum Press, New York10.1007/978-1-4757-2519-3 ↗
22. Raghavan V (2005) J Phase Equilib Diffus 26:17110.1007/s11669-005-0137-x ↗
23. Zhang J, Wang JY, Zhou YC (2007) Acta Mater 55:438110.1016/j.actamat.2007.03.033 ↗
24. Wigren J, Hansson M, Gougeon P, Moreau C (1996) In: Berndt CB (ed) Thermal spray: practical solutions for engineering problems. ASM International, Materials Park, Ohio, USA