Excellent self-healing and antifogging coatings based on polyvinyl alcohol/hydrolyzed poly(styrene-co-maleic anhydride)
Source abstract
Abstract
To develop low-cost and high-performance self-healing antifogging coatings, polyvinyl alcohol/hydrolyzed poly(styrene-co-maleic anhydride) (PVA/H-PSMA) coatings were prepared from a mixed solution of polyvinyl alcohol (PVA) and hydrolyzed poly(styrene-co-maleic anhydride) (H-PSMA) via spin coating and annealing. The microstructure, antifogging behavior, and self-healing ability were investigated. High transparency and low surface roughness were observed when the PVA/H-PSMA film was coated on glass slides. The PVA/H-PSMA coatings showed excellent antifogging performance in a warm, humid environment. The coatings also performed well when transferred from a refrigerator to room temperature. The antifogging coatings showed desirable water resistance due to strong chemical bonding between PVA and H-PSMA, as well as excellent self-healing ability due to hydrogen bonding self-assembly in the PVA/H-PSMA structure. The coatings still exhibited excellent antifogging effects after 20 scratching-repairing cycles, illustrating their potential use in practical applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Li J, Zhu J, Gao X (2014) Bio-inspired high-performance antireflection and antifogging polymer films. Small 10:2578–258210.1002/smll.201303910 ↗
2. Yao B, Zhao H, Wang L, Liu Y, Zheng C, Li H, Sun C (2018) Synthesis of acrylate-based UV/thermal dual-cure coatings for antifogging. J Coat Technol Res 15:149–15810.1007/s11998-017-9966-x ↗
3. Han Z, Feng X, Guo Z, Niu S, Ren L (2018) Flourishing bioinspired antifogging materials with superwettability: progresses and challenges. Adv Mater 30:170465210.1002/adma.201704652 ↗
4. Wang F, Yang X, Zhang L, Xu W, Liu H (2017) Novel macromolecular emulsifiers as coatings with water-tolerant antifogging properties based on coumarin-containing copolymeric micelles. Macromol Mater Eng 302:170017310.1002/mame.201700173 ↗
5. Zhao J, Meyer A, Ma L, Ming W (2013) Acrylic coatings with surprising antifogging and frost-resisting properties. Chem Commun 49:11764–1176610.1039/c3cc46561f ↗
6. Zhao J, Ma L, Millians W, Wu T, Ming W (2016) Dual-functional antifogging/antimicrobial polymer coating. ACS Appl Mater Interfaces 8:8737–874210.1021/acsami.6b00748 ↗
7. Li C, Li X, Tao C, Ren L, Zhao Y, Bai S, Yuan X (2017) Amphiphilic antifogging/anti-icing coatings containing POSS-PDMAEMA-b-PSBMA. ACS Appl Mater Interfaces 9:22959–2296910.1021/acsami.7b05286 ↗
8. Tao C, Bai S, Li X, Li C, Ren L, Zhao Y, Yuan X (2018) Formation of zwitterionic coatings with an aqueous lubricating layer for antifogging/anti-icing applications. Prog Org Coat 115:56–6410.1016/j.porgcoat.2017.11.002 ↗
9. Zhang L, Qiao ZA, Zheng M, Huo Q, Sun J (2010) Rapid and substrate-independent layer-by-layer fabrication of antireflection- and antifogging-integrated coatings. J Mater Chem 20:6125–613010.1039/c0jm00792g ↗
10. Zhang T, Yu Q, Wang J, Wu T (2018) Design and fabrication of a renewable and highly transparent multilayer coating on poly (lactic acid) film capable of UV-shielding and antifogging. Ind Eng Chem Res 57:4577–458410.1021/acs.iecr.8b00120 ↗
11. Qian B, Ren JF, Song ZW, Zhou YC (2018) One pot graphene-based nanocontainers as effective anticorrosion agents in epoxy-based coatings. J Mater Sci 53:14204–14216. https://doi.org/10.1007/s10853-018-2615-710.1007/s10853-018-2615-7 ↗
12. Gharibi R, Yeganeh H, Abdali Z (2018) Preparation of antimicrobial wound dressings via thiolene photopolymerization reaction. J Mater Sci 53:1581–1595. https://doi.org/10.1007/s10853-017-1622-410.1007/s10853-017-1622-4 ↗
13. Wang Y, Li T, Li S, Sun J (2015) Antifogging and frost-resisting polyelectrolyte coatings capable of healing scratches and restoring transparency. Chem Mater 27:8058–806510.1021/acs.chemmater.5b03705 ↗
14. Xu F, Li X, Li Y, Sun J (2017) Oil-repellent antifogging films with water-enabled functional and structural healing ability. ACS Appl Mater Interfaces 9:27955–2796310.1021/acsami.7b08996 ↗
15. Li Y, Fang X, Wang Y, Ma B, Sun J (2016) Highly transparent and water-enabled healable antifogging and frost-resisting films based on poly(vinyl alcohol)-Nafion complexes. Chem Mater 28:6975–698410.1021/acs.chemmater.6b02684 ↗
16. Zhang X, He J (2015) Hydrogen-bonding-supported self-healing antifogging thin films. Sci Rep 5:922710.1038/srep09227 ↗
17. England MW, Urata C, Dunderdale GJ, Hozumi A (2016) Anti-fogging/self-healing properties of clay-containing transparent nanocomposite thin films. ACS Appl Mater Interfaces 8:4318–432210.1021/acsami.5b11961 ↗
18. Hu B, Chen L, Lan S, Ren P, Wu S, Liu X, Shi X, Li H, Du Y, Ding F (2018) Layer-by-layer assembly of polysaccharide films with self-healing and antifogging properties for food packaging applications. ACS Appl Nano Mater 1:3733–374010.1021/acsanm.8b01009 ↗
19. Manabe K, Matsuda M, Nakamura C, Takahashi K, Kyung K-H, Shiratori S (2017) Antifibrinogen, antireflective, antifogging surfaces with biocompatible nano-ordered hierarchical texture fabricated by layer-by-layer self-assembly. Chem Mater 29:4745–475310.1021/acs.chemmater.7b00465 ↗
20. Chevallier P, Turgeon S, Sarrabournet C, Turcotte R, Laroche G (2011) Characterization of multilayer anti-fog coatings. ACS Appl Mater Interfaces 3:750–75810.1021/am1010964 ↗
21. Lee H, Mensire R, Cohen RE, Rubner MF (2011) Strategies for hydrogen bonding based layer-by-layer assembly of poly(vinyl alcohol) with weak polyacids. Macromolecules 45:347–35510.1021/ma202092w ↗
22. Ricciardi R, Auriemma F, De Rosa C, Lauprêtre F (2004) X-ray diffraction analysis of poly(vinyl alcohol) hydrogels, obtained by freezing and thawing techniques. Macromolecules 37:1921–192710.1021/ma035663q ↗
23. Gui W, Yang Y, Zhu XJ (2016) High-efficiency recovery of rare earth ions by hydrolyzed poly(styrene-co-maleic anhydride). J Appl Polym Sci 133:4367610.1002/app.43676 ↗
24. Brown PS, Atkinson QDLA, Badyal JPS (2014) Ultrafast oleophobic-hydrophilic switching surfaces for antifogging, self-cleaning, and oil-water separation. ACS Appl Mater Interfaces 6:7504–751110.1021/am500882y ↗
25. Tang C, Ye S, Liu H (2007) Electrospinning of poly(styrene-co-maleic anhydride) (SMA) and water-swelling behavior of crosslinked/hydrolyzed SMA hydrogel nanofibers. Polymer 48:4482–449110.1016/j.polymer.2007.05.041 ↗
26. Kumari S, Nigam D, Agarwal D, Nigam I (2007) Synthesis and characterization of alkali-modified styrene-maleic anhydride copolymer for dispersion of TiO2. J Appl Polym Sci 103:3194–320510.1002/app.25131 ↗
27. Chen YN, Peng L, Liu T, Wang Y, Shi S, Wang H (2016) Poly(vinyl alcohol)-tannic acid hydrogels with excellent mechanical properties and shape memory behaviors. ACS Appl Mater Interfaces 8:27199–2720610.1021/acsami.6b08374 ↗
28. Mansur HS, Sadahira CM, Souza AN, Mansur AAP (2008) FTIR spectroscopy characterization of poly (vinyl alcohol) hydrogel with different hydrolysis degree and chemically crosslinked with glutaraldehyde. Mater Sci Eng, C 28:539–54810.1016/j.msec.2007.10.088 ↗
29. Pompe T, Zschoche S, Herold N, Salchert K, Gouzy MF, Sperling C, Werner C (2003) Maleic anhydride copolymers-A versatile platform for molecular biosurface engineering. Biomacromol 4:1072–107910.1021/bm034071c ↗
30. Al-Sabagh AM, El-Din MRN, Morsi RE, Elsabee MZ (2009) Styrene-maleic anhydride copolymer esters as flow improvers of waxy crude oil. J Dispersion Sci Technol 30:420–42610.1080/01932690802498294 ↗
31. Rhim JW, Park HB, Lee CS, Jun JH, Kim DS, Lee YM (2004) Crosslinked poly(vinyl alcohol) membranes containing sulfonic acid group: proton and methanol transport through membranes. J Membr Sci 238:143–15110.1016/j.memsci.2004.03.030 ↗
32. Chua CK, Leong KF, Tan KH, Wiria FE, Cheah CM (2004) Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects. J Mater Sci Mater Med 15:1113–112110.1023/B:JMSM.0000046393.81449.a5 ↗
33. Yang CC (2004) Chemical composition and XRD analyses for alkaline composite PVA polymer electrolyte. Mater Lett 58:33–3810.1016/S0167-577X(03)00409-9 ↗
34. Zare EN, Lakouraj MM, Moghadam PN, Hasanzadeh R (2015) Novel conducting nanocomposite based on polypyrrole and modified poly(styrene-alt-maleic anhydride) via emulsion polymerization: synthesis, characterization, antioxidant, and heavy metal sorbent activity. Polym Compos 36:138–14410.1002/pc.22922 ↗
35. Heydari M, Moghadam PN, Fareghi AR, Bahram M, Movagharnezhad N (2015) Synthesis of water-soluble conductive copolymer based on polyaniline. Polym Adv Technol 26:250–25410.1002/pat.3449 ↗
36. Dinunzio JC, Miller DA, Yang W (2008) Amorphous compositions using concentration enhancing polymers for improved bioavailability of itraconazole. Mol Pharm 5:968–98010.1021/mp800042d ↗
37. Roy PK, Rawat AS, Choudhary V, Rai PK (2004) Synthesis and analytical application of a chelating resin based on a crosslinked styrene/maleic acid copolymer for the extraction of trace-metal ions. J Appl Polym Sci 94:1771–177910.1002/app.21109 ↗
38. Ping ZH, Nguyen QT, Chen SM, Zhou JQ, Ding YD (2001) States of water in different hydrophilic polymers-DSC and FTIR studies. Polymer 42:8461–846710.1016/S0032-3861(01)00358-5 ↗