A study of the hot formability of an Al-Cu-Mg-Zr alloy
Source abstract
Abstract
The high-temperature plasticity of a Zr-stabilised 2014 aluminium alloy was investigated in a wide range of temperatures and strain rates. The microstructure of representative torsioned samples was analysed by transmission electron microscopy, and the characteristics of particle and precipitate distribution were quantitatively estimated. The strain-rate dependence on stress and temperature was analysed by means of the conventional constitutive equations used for describing hot-working behaviour as well as a modified form of the sinh equation, where the stress was substituted by an effective stress, i.e., by the difference between the stress and a threshold stress. This temperature-dependent threshold stress was found to be a fraction of the Orowan stress generated by precipitates increasing from 62 to 94% as temperature decreased from 773 to 573 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. H. J. McQueen and J. J. Jonas, in “Metal Forming: Interrelation Between Theory and Practice,” edited by A. L. Hoffmanner (Plenum, New York, 1971) p. 393.10.1007/978-1-4615-1757-3_18 ↗
2. H. J. McQueen, E. Evangelista, N. Jin and M. E. Kassner, Metall. Mater. Trans. A 26A (1995) 1757.10.1007/BF02670763 ↗
3. H. J. McQueen, E. Evangelista and M. E. Kassner, Z. Metallkde. 82 (1995) 336.
4. E. Evangelista, F. Gabrielli, P. Mengucci and E. Quadrini, in “Strength of Metals and Alloys,” edited by P. O. Kettunen, T. K. Lepisto and M. E. Lehtonen (Pergamon Press, Oxford, UK, 1988) p. 977.
5. E. Evangelista, E. Dirusso, H. J. McQueen and P. Mengucci, in “Homogenization and Annealing of Aluminium and Copper Alloys,” edited by H. D. Merchant, J. Crane and E. H. Chia (The Minerals, Metals and Material Society, Warrendale, PA, 1988) p. 209.
6. H. J. McQueen, in “Hot Deformation of Aluminum Alloys,” edited by T. G. Langdon, H. D. Merchant, J. G. Morris and M. A. Zaidi (The Minerals, Metals and Material Society, Warrendale, PA, 1991 p. 31.
7. Idem., in “Hot Deformation of Aluminium Alloys,” edited by T. G. Langdon, H. D. Merchant, J. G. Morris and M. A. Zaidi (The Minerals, Metals and Material Society, Warrendale, PA, 1991) p. 105.
8. H. J. McQueen and J. J. Jonas, in “Microstructural Control in Aluminium Alloys,” edited by C. Q. Quen et al. (TMS-AIME, Warrendale, PA, 1986) p. 197.
9. E. Evangelista, H. J. McQueen and E. Cerri, in “Modelling of Plastic Deformation and its Engineering Applications,” edited by S. I. Andersen et al. (Risø National LaboratoryRoskilde, DK, 1992) p. 265.
10. L. Blaz and E. Evangelista, Mater. Sci. Eng. A207 (1996) 195.10.1016/0921-5093(95)10038-5 ↗
11. E. Cerri, E. Evangelista, A. Forcellese and H. J. McQueen, ibid. 197 (1995) 181.10.1016/0921-5093(94)09714-3 ↗
12. H. J. McQueen and J. J. Jonas, in “Plastic Deformation of Materials,” Vol.6, edited by R. J. Arsenault (Academic Press, New York, 1975) p. 393.10.1016/B978-0-12-341806-7.50014-3 ↗
13. E. Evangelista, A. Forcellese, F. Gabrielli and P. Mengucci, in “Hot Deformation of Aluminium Alloys,” edited by T. G. Langdon, H. D. Merchant, J. G. Morris and M. A. Zaidi (The Minerals, Metals and Material Society, Warrendale, PA, 1991) p. 121.
14. E. Cerri, E. Evangelista, A. Forcellese, P. Fiorini and J. Stobrawa, in “Strength of Metals and Alloys,” edited by H. Oikawa et al. (The Japan Institute of Metals, Tokyo, 1994) p.807.
15. H. J. McQueen and J. J. Jonas, Manufacturing Eng. Trans. 2 (1973) 209.
16. M. E. Kassner and M.-T. Perez-Prado, Prog. Mat. Sci. 45 (2000) 6.
17. E. Evangelista and S. Spigarelli, Metall. Trans. 33A (2002) 373.10.1007/s11661-002-0098-1 ↗
18. P. Olaffson and R. Sandstrom, Mat. Sci. Tech. 17 (2001) 655.10.1179/026708301101510528 ↗
19. F. A. Mohamed and T. G. Langdon, Metall. Trans. 5 (1974) 2339.10.1007/BF02644014 ↗
20. S. Mrowec, in “Defects and Diffusion in Solids” (Elsevier, Amsterdam, 1980) p. 397.
21. K.-T. Park, E. J. Lavernia and F. A. Mohamed, Acta Metall. Mater. 42 (1994) 667.10.1016/0956-7151(94)90264-X ↗
22. Y. Li, S. R. Nutt and F. A. Mohamed, Acta Mater. 45 (1997) 2607.10.1016/S1359-6454(96)00367-9 ↗
23. Y. Li and T. G. Langdon, Metall. Mater. Trans. 29A (1998) 2523.10.1007/s11661-998-0224-9 ↗
24. L. Kloc, S. Spigarelli, E. Cerri, E. Evangelista and T. G. Langdon, Acta Mater. 45 (1997) 529.10.1016/S1359-6454(96)00190-5 ↗
25. L. Kloc, E. Cerri, S. Spigarelli, E. Evangelista and T. G. Langdon, Mater. Sci. Eng. A 216 (1996) 161.10.1016/0921-5093(96)10404-4 ↗
26. K.-T. Park, E. J. Lavernia and F. A Mohamed, Acta Metall. Mater. 38 (1990) 2149.10.1016/0956-7151(90)90082-R ↗
27. K.-T. Park and F. A. Mohamed, Metall. Mater. Trans. 26A (1995) 3119.10.1007/BF02669441 ↗
28. Y. Li and F. A. Mohamed, Acta Mater. 45 (1997) 4797.10.1016/S1359-6454(97)00132-8 ↗
29. Y. Li and T. G. Langdon, Mater. Sci. Eng. A 245 (1998) 1.10.1016/S0921-5093(97)00712-0 ↗
30. Idem., Acta Mater. 46 (1998) 1143.10.1016/S1359-6454(97)00320-0 ↗
31. J. W. Martin, in “Micromechanisms in Particle-Hardened Alloys” (Cambridge University Press, Cambridge, 1980) p. 62.