BREAKUP EVOLUTION AND SPRAY CHARACTERISTICS OF TWIN-FLUID ATOMIZERS WITH VARIOUS GAS-TO-LIQUID RATIOS
Source abstract
Abstract
This study investigates the jet breakup behavior of twin-fluid atomizers under different gas-to-liquid mass rate ratios (GLRs). Optical visualization experiments were performed to observe the multiphase flow and identify jet breakup patterns. The results indicate that in twin-fluid atomizers, the jet mainly exhibits three different patterns under different GLRs: liquid column, film collapse, and film split patterns. The transitions are influenced by both the GLRs and length of the mixing port. Furthermore, for short and medium atomizers, the dimensionless breakup length initially decreases with increasing GLRs, then slightly increases, and finally decreases again. Therefore, a critical mixing port length exists, beyond which atomization performance does not improve significantly. In addition, the jets emerging from the short and medium atomizers exhibit clear asymmetrical characteristics when the GLRs are within the range of 0.01-0.02. The breakup process on the air supply side is faster than that on the opposite side, resulting in small droplet sizes, high droplet number densities, and great jet velocities on the air supply side. Among the three types of atomizers, the medium atomizer with a length-to-diameter ratio of approximately three presents the broadest distribution of the film split pattern, in which the liquid jet quickly breaks up into ligaments and droplets.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fluid Dynamics and Heat Transfer · Electrohydrodynamics and Fluid Dynamics · Plant Surface Properties and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Akinyemi, O.S. and Jiang, L., Development and Combustion Characterization of a Novel Twin-Fluid Fuel Injector in a Swirl-Stabilized Gas Turbine Burner Operating on Straight Vegetable Oil, Exp. Therm. Fluid Sci., vol. 102, pp. 279-290, 2019.10.1016/j.expthermflusci.2018.11.014 ↗
2. Aubignat, E., Planche, M.P., Billieres, D., Allimant, A., Girardot, L., Bailly, Y., and Montavon, G., Optimization of the Injection with a Twin-Fluid Atomizer for Suspension Plasma Spray Process Using Three Non-Intrusive Diagnostic Tools, J. Vis., vol. 19, pp. 21â36, 2016.10.1007/s12650-015-0281-2 ↗
3. Barreras, F., Lozano, A., Barroso, J., and Lincheta, E., Experimental Characterization of Industrial Twin-Fluid Atomizers, Atomiz. Sprays, vol. 16, no. 2, 2006.10.1615/AtomizSpr.v16.i2.10 ↗
4. Battistoni, M., Xue, Q.L., and Som, S., Large-Eddy Simulation (LES) of Spray Transients: Start and End of Injection Phenomena, Oil Gas Sci. Technol. - Rev. IFP Energ. Nouv., vol. 71, no. 1, 2016.10.2516/ogst/2015024 ↗
5. Bollen, J., van der Zwaan, B., Brink, C., and Eerens, H., Local Air Pollution and Global Climate Change: A Combined Cost-Benefit Analysis, Resour. Energy Econ., vol. 31, no. 3, pp. 161-181, 2009.10.1016/j.reseneeco.2009.03.001 ↗
6. Chen, B., Gao, D., Li, Y., Chen, C., Wang, Z., Zhong, Q., Wu, S., and Zhao, J., Experimental Analysis of Spray Behavior and Lubrication Performance under Twin-Fluid Atomization, J. Manuf. Process., vol. 61, pp. 561-573, 2021.10.1016/j.jmapro.2020.11.029 ↗
7. Choi, Y.H., Jang, Y.J., Park, H., Kim, W.Y., Lee, Y.H., Choi, S.H., and Lee, J.S., Carbon Dioxide Fischer-Tropsch Synthesis: A New Path to Carbon-Neutral Fuels, Appl. Catal. B: Environ., vol. 202, pp. 605-610, 2017.10.1016/j.apcatb.2016.09.072 ↗
8. Chong, C.T. and Hochgreb, S., Effect of Atomizing Air Flow on Spray Atomization of an Internal-Mix Twin-Fluid Atomizer, Atomiz. Sprays, vol. 25, no. 8, 2015.10.1615/AtomizSpr.2015011361 ↗
9. Deng Y., Xing W., Jin Y., Leng X., Sato K., Nishida K., Ogata Y., and Raut S., Effect of Mixing Port Length on Internal Flow and Near-field Jet Characteristics of Twin-fluid Atomizers, Atomiz. Sprays, vol. 34, no. 8, 2024.10.1615/AtomizSpr.2024051254 ↗
10. Ferreira, G., Garcia, J.A., Barreras, F., Lozano, A., and Lincheta, E., Design Optimization of Twin-Fluid Atomizers with an Internal Mixing Chamber for Heavy Fuel Oils, Fuel Process. Technol., vol. 90, pp. 270-278, 2009.10.1016/j.fuproc.2008.09.013 ↗
11. Gad, H.M., Ibrahim, I.A., Abdel-Baky, M.E., Abd El-samed, A.K., and Farag, T.M., Experimental Study of Diesel Fuel Atomization Performance of Air Blast Atomizer, Exp. Therm. Fluid Sci., vol. 99, pp. 211-218, 2018.10.1016/j.expthermflusci.2018.07.006 ↗
12. Huang, H., Dabiri, D., and Gharib, M., On Errors of Digital Particle Image Velocimetry, Meas. Sci. Technol., vol. 8, no. 12, pp. 1427, 1997.10.1088/0957-0233/8/12/007 ↗
13. Ismael, M.A., Heikal, M.R., Aziz, A., Syah, F., and Crua, C., The Effect of Fuel Injection Equipment on the Dispersed Phase of Water-in-Diesel Emulsions, Appl. Energy, vol. 222, pp. 762-771, 2018.10.1016/j.apenergy.2018.03.070 ↗
14. Jedelsky, J. and Jicha, M., Novel Modifications of Twin-Fluid Atomizers: Performance, Advantages, and Drawbacks, Proc. 23rd Eur. Conf. Liquid Atomization Spray Syst. (ILASS-Europe), Brno, Czech Republic, vol. 6, no. 8, pp. 1-5, 2010.
15. Jin Y., Zhang, Y., Dong, P., Zhai, C., Nishida, K., Wang, Y., and Leng, X., Diesel Spray Characteristics of Multi-Hole Injectors under Geometrical Similarity Condition, Atomization Sprays, 2025.10.1615/AtomizSpr.2025053971 ↗
16. Karnawat, J. and Kushari, A., Spray Evolution in a Twin-Fluid Swirl Atomizer, Atomiz. Sprays, vol. 18, no. 5, 2008.10.1615/AtomizSpr.v18.i5.30 ↗
17. Li, G. and Li, C., Experimental Study on the Spray Steadiness of an Internal-Mixing Twin-Fluid Atomizer, Energy, vol. 226, 2021.10.1016/j.energy.2021.120394 ↗
18. Liu, C., Wu, K., Zhang, Z., Yuan, Y., and Fan, X., Experimental Study of the Spray Characteristics of Twin-Fluid Atomization: Focusing on the Annular Flow Regime, Phys. Fluids, vol. 34, no. 12, 2022.10.1063/5.0128231 ↗
19. Li, Z., Wu, Y., Cai, C., Zhang, H., Gong, Y., Takeno, K., Hashiguchi, K., and Lu, J., Mixing and Atomization Characteristics in an Internal-Mixing Twin-Fluid Atomizer, Fuel, vol. 97, pp. 306-314, 2012.10.1016/j.fuel.2012.03.006 ↗
20. Mishra, D.P. and Goyal, N., Experimental Study of Internally Mixed Twin-Fluid Liquid Atomizer, Int. J. Turbo Jet Engines, vol. 25, no. 2, pp. 105-110, 2008.10.1515/TJJ.2008.25.2.105 ↗
21. Mlkvik, M., Jedelsky, J., Karbstein, H.P., and Gaukel, V., Spraying of Viscous Liquids: Influence of Fluid-Mixing Mechanism on the Performance of Internal-Mixing Twin-Fluid Atomizers, Appl. Sci., vol. 10, no. 15, p. 5249, 2020.10.3390/app10155249 ↗
22. Mkvik, M., Smolár, M., and Olsiak, R., Numerical Investigation of the Twin-Fluid Atomizers Internal Flows, AIP Conf. Proc., vol. 1768, no. 1, 2016.10.1063/1.4963057 ↗
23. Mohammadi, A., Ommi, F., and Saboohi, Z., Experimental and Numerical Study of a Twin-Fluid Two-Phase Internal-Mixing Atomizer, J. Therm. Anal. Calorim., vol. 147, no. 5, pp. 3673-3687, 2022.10.1007/s10973-021-10795-2 ↗
24. Moreno-Gonzalez, M., Berger, A., Borsboom-Hanson, T., and Mérida, W., Carbon-Neutral Fuels and Chemicals: Economic Analysis of Renewable Syngas Pathways via COâ Electrolysis, Energy Convers. Manag., vol. 244, p. 114452, 2021.10.1016/j.enconman.2021.114452 ↗
25. Nazeer, Y.H., Ehmann, M., Sami, M., and Gavaises, M., Atomization Mechanism of Internally Mixing Twin-Fluid Y-Jet Atomizer, J. Energy Eng., vol. 147, no. 1, p. 04020075, 2021.10.1061/(ASCE)EY.1943-7897.0000723 ↗
26. Otsu, N., A Threshold Selection Method from Gray-Level Histograms, IEEE Trans. Syst. Man Cybern., vol. 9, no. 1, pp. 62-66, 1979.10.1109/TSMC.1979.4310076 ↗
27. Rajmohan, B., Reddy, S.N., and Meikap, B.C., Removal of SO2 from Industrial Effluents by a Novel Twin-Fluid Air-Assist Atomized Spray Scrubber, Ind. Eng. Chem. Res., vol. 47, no. 20, pp. 7833-7840, 2008.10.1021/ie800712a ↗
28. Sänger, A., Jakobs, T., Djordjevic, N., Kolb, T., and South, K.I.T.C., Effect of Primary Instability of a High Viscous Liquid Jet on the Spray Quality Generated by a Twin-Fluid Atomizer, Proc. 26th Annu. Conf. Liquid Atomization Spray Syst. (ILASS), Bremen, Germany, pp. 8-10, 2014.
29. Sato, K., Okiura, K., Shoji, K., and Takahashi, Y., Spray Characteristics of CWM by a Pneumatic Internal Mixing Atomizer, J. Fuel Soc. Jpn., vol. 70, no. 11, pp. 1067-1074, 1991.10.3775/jie.70.11_1067 ↗
30. Stamhuis, E. and Thielicke, W., PIVlab-Towards User-Friendly, Affordable, and Accurate Digital Particle Image Velocimetry in MATLAB, J. Open Res. Softw., vol. 2, no. 1, 2014.10.5334/jors.bl ↗
31. Sun, C., Ning, Z., Qiao, X., Lv, M., Li, Y., Zhao, J., and Wang, X., Measurements of Internal Flow Regime and Bubble Size in Effervescent Atomizer, Exp. Therm. Fluid Sci., vol. 98, pp. 604-620, 2018.10.1016/j.expthermflusci.2018.07.002 ↗
32. Thielicke, W. and Sonntag, R., Particle Image Velocimetry for MATLAB: Accuracy and Enhanced Algorithms in PIVlab, J. Open Res. Softw., vol. 9, no. 1, 2021.10.5334/jors.334 ↗
33. Watanawanyoo, P., Hirahara, H., Mochida, H., Furukawa, T., Nakamura, M., and Chaitep, S., Experimental Investigations on Spray Characteristics in Twin-Fluid Atomizer, Procedia Eng., vol. 24, pp. 866-872, 2011.10.1016/j.proeng.2011.12.416 ↗
34. Wu, H., Zhang, F., and Zhang, Z., Droplet Breakup and Coalescence of an Internal-Mixing Twin-Fluid Spray, Phys. Fluids, vol. 33, no. 1, 2021.10.1063/5.0030777 ↗
35. Xing, W., Nishida, K., Ogata, Y., Sato, K., and Hashikuchi, K., Characterization of Liquid and Air Flow Behaviour in Twin Fluid Atomizer for Gas Turbine Combustor[C], International Conference on Liquid Atomization and Spray Systems, Edinburgh, UK, vol. 1, no. 1, 2021.10.2218/iclass.2021.5944 ↗
36. Xing, W., Raut, S., Sato, K., Nishida, K., and Ogata, Y., Breakup Behaviors of Annular Liquid Jet From Twin-Fluid Atomizers in Crossflow, Phys., vol. 34, no. 10, 2024.10.1615/AtomizSpr.2024049599 ↗
37. Xing, W., Sato, K., Nishida, K., and Hashiguchi, K., Elucidation of Internal Flow and Its Effect on the Jet of a Twin-Fluid Atomizer for Gas Turbine Crossflow Combustors, Phys., vol. 33, no. 1, pp. 69-92, 2023.10.1615/AtomizSpr.2022042094 ↗
38. Zaremba, M., Weiß, L., Malý, M., Wensing, M., Jedelský, J., and Jícha, M., Low-Pressure Twin-Fluid Atomization: Effect of Mixing Process on Spray Formation, Int. J. Multiph. Flow, vol. 89, pp. 277-289, 2017.10.1016/j.ijmultiphaseflow.2016.10.015 ↗
39. Zhai, C., Li, K., Chen, R., and Luo, H., Experimental Investigation of Fuel Spray and Combustion with Wall Impingement under Premixed Conditions: A Comparative Analysis of Flat Wall and 2-D Piston Cavity, Energy, vol. 315, p. 134386, 2025.10.1016/j.energy.2025.134386 ↗