Multi-cell energy-absorbing structures with hollow columns inspired by the beetle elytra
Source abstract
Abstract
In this work, we propose a new type of thin-walled energy-absorbed structure with hollow columns that possesses a design inspired by the beetle elytra. The failure mode of the bionic thin-walled structures is firstly discussed by developing a theoretical model. The energy absorption properties of these bio-inspired multi-cell thin-walled structures have been then investigated using nonlinear finite element simulations. The values of the specific energy absorption and the crushing force effectiveness have been evaluated for different structures with parametrized column nested configurations. Dynamic impact simulations of multi-cell tubes with different columns nested modes, wall thickness and impact angles have been performed, and the results discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. He Q, Ma D, Zhang Z, Yao L (2015) Mean compressive stress constitutive equation and crashworthiness optimization design of three novel honeycombs under axial compression. Int J Mech Sci 99:274–28710.1016/j.ijmecsci.2015.05.021 ↗
2. Rouzegar J, Assaee H, Niknejad A, Elahi SA (2015) Geometrical discontinuities effects on lateral crushing and energy absorption of tubular structures. Mater Des 65:343–35910.1016/j.matdes.2014.09.041 ↗
3. Zohrabi M, Niknejad A, Ziaee S (2015) A novel method for enhancing energy absorption capability by thin-walled sections during the flattening process. Thin Wall Struct 97:140–15310.1016/j.tws.2015.09.013 ↗
4. Luo X, Xu J, Zhu J, Gao Y, Nie L, Li W (2015) A new method to investigate the energy absorption characteristics of thin-walled metal circular tube using finite element analysis. Thin Wall Struct 95:24–3010.1016/j.tws.2015.06.001 ↗
5. Ali M, Ohioma E, Kraft F, Alam K (2015) Theoretical, numerical, and experimental study of dynamic axial crushing of thin walled pentagon and cross-shape tubes. Thin Wall Struct 94:253–27210.1016/j.tws.2015.04.007 ↗
6. Elahi SA, Forouzan MR (2019) Increasing the chatter instability speed limit in cold strip rolling using wavy layered composite plates as a damper. Thin Wall Struct 137:19–2810.1016/j.tws.2018.12.004 ↗
7. Rabiee A, Ghasemnejad H (2019) Lightweight design to improve crushing behaviour of multi-stitched composite tubular structures under impact loading. Thin Wall Struct 135:109–12210.1016/j.tws.2018.11.002 ↗
8. Zhang L, Bai Z, Bai F (2018) Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections. Thin Wall Struct 122:42–5110.1016/j.tws.2017.10.010 ↗
9. Zhou X, Cheng G, Liu J, Yang Y, Chen YF (2019) Shear transfer behavior at the circular tubed column-steel beam interface. Thin Wall Struct 137:40–5210.1016/j.tws.2018.12.031 ↗
10. Xu F (2015) Enhancing material efficiency of energy absorbers through graded thickness structures. Thin Wall Struct 97:250–26510.1016/j.tws.2015.09.020 ↗
11. Xiang Y, Yu T, Yang L (2016) Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing key performance indicators. Mater Des 89:689–69610.1016/j.matdes.2015.10.004 ↗
12. Fang J, Gao Y, Sun G, Zheng G, Li Q (2015) Dynamic crashing behavior of new extrudable multi-cell tubes with a functionally graded thickness. Int J Mech Sci 103:63–7310.1016/j.ijmecsci.2015.08.029 ↗
13. Wu S, Zheng G, Sun G, Liu Q, Li G, Li Q (2016) On design of multi-cell thin-wall structures for crashworthiness. Int J Impact Eng 88:102–11710.1016/j.ijimpeng.2015.09.003 ↗
14. Wang Z (2019) Recent advances in novel metallic honeycomb structure. Compos B Eng 166:731–74110.1016/j.compositesb.2019.02.011 ↗
15. Wang Z, Liu J (2019) Numerical and theoretical analysis of honeycomb structure filled with circular aluminum tubes subjected to axial compression. Compos B Eng 165:626–63510.1016/j.compositesb.2019.01.070 ↗
16. Wang Z, Li Z, Shi C, Zhou W (2019) Mechanical performance of vertex-based hierarchical vs square thin-walled multi-cell structure. Thin Wall Struct 134:102–11010.1016/j.tws.2018.09.017 ↗
17. Kumar AP (2019) Influence of plain end-cap on the energy absorption characteristics of cylindrical tubular structures for lateral impact vehicle collisions. Thin Wall Struct 138:32–4510.1016/j.tws.2019.01.036 ↗
18. Huang Z, Zhang X (2019) Three-point bending of thin-walled rectangular section tubes with indentation mode. Thin Wall Struct 137:231–25010.1016/j.tws.2019.01.015 ↗
19. Liu Q, Ou Z, Mo Z, Li Q, Qu D (2015) Experimental investigation into dynamic axial impact responses of double hat shaped CFRP tubes. Compos B Eng 79:494–50410.1016/j.compositesb.2015.05.016 ↗
20. Boria S, Obradovic J, Belingardi G (2015) Experimental and numerical investigations of the impact behaviour of composite frontal crash structures. Compos B Eng 79:20–2710.1016/j.compositesb.2015.04.016 ↗
21. Li W, An X, Zheng Q, Yang F, Fan H (2019) Hierarchical design, manufacture and crushing behaviors of CFRP tubular energy absorbers. Thin Wall Struct 140:416–42510.1016/j.tws.2019.03.058 ↗
22. Meguid SA, Yang F, Verberne P (2015) Progressive collapse of foam-filled conical frustum using kinematically admissible mechanism. Int J Impact Eng 82:25–3510.1016/j.ijimpeng.2014.11.013 ↗
23. Baroutaji A, Gilchrist MD, Smyth D, Olabi AG (2015) Analysis and optimization of sandwich tubes energy absorbers under lateral loading. Int J Impact Eng 82:74–8810.1016/j.ijimpeng.2015.01.005 ↗
24. Djamaluddin F, Abdullah S, Ariffin AK, Nopiah ZM (2015) Non-linear finite element analysis of bitubal circular tubes for progressive and bending collapses. Int J Mech Sci 99:228–23610.1016/j.ijmecsci.2015.06.001 ↗
25. Ehinger D, Krüger L, Martin U, Weigelt C, Aneziris CG (2015) Buckling and crush resistance of high-density TRIP-steel and TRIP-matrix composite honeycombs to out-of-plane compressive load. Int J Solids Struct 66:207–21710.1016/j.ijsolstr.2015.02.052 ↗
26. Hou S, Liu T, Zhang Z, Han X, Li Q (2015) How does negative Poisson’s ratio of foam filler affect crashworthiness? Mater Des 82:247–25910.1016/j.matdes.2015.05.050 ↗
27. Azarakhsh S, Rahi A, Ghamarian A, Motamedi H (2015) Axial crushing analysis of empty and foam-filled brass bitubular cylinder tubes. Thin Wall Struct 95:60–7210.1016/j.tws.2015.05.019 ↗
28. Fu J, Liu Q, Liufu K, Deng Y, Fang J, Li Q (2019) Design of bionic-bamboo thin-walled structures for energy absorption. Thin Wall Struct 135:400–41310.1016/j.tws.2018.10.003 ↗
29. Hu D, Wang Y, Song B, Dang L, Zhang Z (2019) Energy-absorption characteristics of a bionic honeycomb tubular filling structure inspired by bamboo under axial crushing. Compos Part B Eng 162:21–3210.1016/j.compositesb.2018.10.095 ↗
30. Yong Z, Xiang X, Jin W, Chen T, Wang CH (2018) Crushing analysis for novel bio-inspired hierarchical circular structures subjected to axial load. Int Mech Sci 140:407–43110.1016/j.ijmecsci.2018.03.015 ↗
31. Tsang HH, Raza S (2018) Impact energy absorption of bio-inspired tubular sections with structural hierarchy. Compos Struct 195:199–21010.1016/j.compstruct.2018.04.057 ↗
32. Gladman AS, Matsumoto EA, Lewis JA (2016) Biomimetic 4D printing. Nat Mater 15:413–41810.1038/nmat4544 ↗
33. Biswal S, Mignolet M, Rodriguez AA (2019) Modeling and control of flapping wing micro aerial vehicles. Bioinspir Biomim 14:02600410.1088/1748-3190/aafc3c ↗
34. Collins SH, Wiggin MB, Sawicki GS (2015) Reducing the energy cost of human walking using an unpowered exoskeleton. Nature 522:212–21510.1038/nature14288 ↗
35. Hao P, Du J (2018) Mechanical properties of bio-mimetic energy-absorbing materials under impact loading. J Mater Sci 53:3189–3197. https://doi.org/10.1007/s10853-017-1798-710.1007/s10853-017-1798-7 ↗
36. Hao P, Du J (2018) Energy absorption characteristics of bio-inspired honeycomb column thinwalled structure under impact loading. J Mech Behav Biomed 79:301–30810.1016/j.jmbbm.2018.01.001 ↗
37. Xiang J, Du J (2017) Energy absorption characteristics of bio-inspired honeycomb structure under axial impact loading. Mater Sci Eng A 696:283–28910.1016/j.msea.2017.04.044 ↗
38. Xiang J, Du J, Li D, Scarpa F (2017) Numerical analysis of the impact resistance in aluminum alloy bi-tubular thin-walled structures designs inspired by beetle elytra. J Mater Sci 52:13247–13260. https://doi.org/10.1007/s10853-017-1420-z10.1007/s10853-017-1420-z ↗
39. Naleway SE, Porter MM, Mckittrick J, Meyers MA (2015) Structural design elements in biological materials: application to bioinspiration. Adv Mater 27:5455–547610.1002/adma.201502403 ↗
40. Chen J, Zhang X, Okabe Y, Saito K, Guo Z, Pan L (2017) The deformation mode and strengthening mechanism of compression in the beetle elytron plate. Mater Des 131:481–48610.1016/j.matdes.2017.06.014 ↗
41. Chen J, He C, Gu C, Liu J, Mi C, Guo S (2014) Compressive and flexural properties of biomimetic integrated honeycomb plates. Mater Des 64:214–22010.1016/j.matdes.2014.07.021 ↗
42. Xu M, Pan L, Chen J, Zhang X, Yu X (2019) The flexural properties of end-trabecular beetle elytron plates and their flexural failure mechanism. J Mater Sci 54:8414–8425. https://doi.org/10.1007/s10853-019-03488-710.1007/s10853-019-03488-7 ↗
43. Yu X, Pan L, Chen J, Zhang X, Wei P (2019) Experimental and numerical study on the energy absorption abilities of trabecular-honeycomb biomimetic structures inspired by beetle elytra. J Mater Sci 54:2193–2204. https://doi.org/10.1007/s10853-018-2958-010.1007/s10853-018-2958-0 ↗
44. Audysho R, Smith R, Altenhof W (2014) Mechanical assessment and deformation mechanisms of aluminum foam filled stainless steel braided tubes subjected to transverse loading. Thin Wall Struct 79:95–10710.1016/j.tws.2014.02.011 ↗
45. Yang S, Qi C (2013) Multiobjective optimization for empty and foam-filled square columns under oblique impact loading. Int J Impact Eng 54:177–19110.1016/j.ijimpeng.2012.11.009 ↗
46. Karagiozova D, Nurick GN, Yuen SCK (2005) Energy absorption of aluminium alloy circular and square tubes under an axial explosive load. Thin Wall Struct 43:956–98210.1016/j.tws.2004.11.002 ↗
47. Liu S, Tong Z, Tang Z, Liu Y, Zhang Z (2015) Bionic design modification of non-convex multi-corner thin-walled columns for improving energy absorption through adding bulkheads. Thin Wall Struct 88:70–8110.1016/j.tws.2014.11.006 ↗
48. Duarte I, Vesenjak M, Krstulovi Opara L, El An I, Ferreira JMF (2015) Manufacturing and bending behaviour of in situ foam-filled aluminium alloy tubes. Mater Des 66:532–54410.1016/j.matdes.2014.04.082 ↗
49. Lee K, Yang Y, Kim S, Yang I (2008) Energy absorption control characteristics of AL thin-walled tubes under impact load. Acta Mech Solida Sin 21:383–38810.1007/s10338-008-0847-9 ↗
50. Chen W, Wierzbicki T (2001) Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption. Thin Wall Struct 39:287–30610.1016/S0263-8231(01)00006-4 ↗