Microstructure, surface chemistry and electrochemical response of Ag|AgCl sensors in alkaline media
Source abstract
Abstract
Characterization of the Ag/AgCl electrode is a necessary step toward its application as a chloride sensor in a highly alkaline medium, such as concrete. The nucleation and growth of AgCl on Ag in 0.1 M HCl was verified through cyclic voltammetry. Ag anodization was performed at current densities, determined by potentiodynamic polarization in the same (0.1 M HCl) medium. The morphology and microstructure of the AgCl layers were evaluated via electron microscopy, while surface chemistry was studied through energy-dispersive spectroscopy and X-ray photoelectron spectroscopy. At current density above 2 mA/cm2, the thickness and heterogeneity of the AgCl layer increased. In this condition, small AgCl particles formed in the immediate vicinity of the Ag substrate, subsequently weakening the bond strength of the Ag/AgCl interface. Silver oxide-based or carbon-based impurities were present on the surface of the sensor in amounts proportional to the thickness and heterogeneity of the AgCl layer. It is concluded that a well-defined link exists between the properties of the AgCl layer, the applied current density and the recorded overpotential during Ag anodization. The results can be used as a recommendation for preparation of chloride sensors with stable performance in cementitious materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Analytical Chemistry and Sensors · Electrochemical Analysis and Applications · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Elsener B, Zimmermann L, Bohni H (2003) Non-destructive determination of the free chloride content in cement based materials. Mater Corros 54(6):440–44610.1002/maco.200390095 ↗
2. Neuman MR (2000) Biopotential electrodes. The biomedical engineering handbook. Chapter 8, CRC Press LLC, Boca Raton10.1201/9781420049510.ch48 ↗
3. Gao X, ZhanG J, YanG Y, Lu S (2011) Preparation of chloride ion selective electrode and its potential response to different chloride solutions representing concrete environments. Mater Sci Forum (Zürich-Stafa: Trans Tech Publ) 1206(675):537–54110.4028/www.scientific.net/MSF.675-677.537 ↗
4. Bozzini B, Giovannelli G, Mele C (2007) Electrochemical dynamics and structure of the Ag/AgCl interface in chloride-containing aqueous solutions. Surf Coat Technol 201(8):4619–462710.1016/j.surfcoat.2006.09.127 ↗
5. Lal H, Thirsk HR, Wynne-Jones WFK (1951) A study of the behaviour of polarized electrodes. Part I. The silver/silver halide system. Trans Faraday Soc 47:70–7710.1039/TF9514700070 ↗
6. Katan T, Gu H, Bennion DN (1976) Analysis of porous electrodes with sparingly soluble reactants IV. Application to Particulate Bed Electrode: Ag/AgCl System. J Electrochem Soc 123(9):1370–137610.1149/1.2133077 ↗
7. Jaya S, Rao TP, Rao GP (1987) Mono-and multilayer formation studies of silver chloride on silver electrodes from chloride-containing solutions. J Appl Electrochem 17(3):635–64010.1007/BF01084139 ↗
8. Beck TR, Rice DE (1984) Conductivity of anodic silver chloride during formation. J Electrochem Soc 131(1):89–9310.1149/1.2115552 ↗
9. Burstein GT, Misra RDK (1983) Electrochemistry of scratched silver electrodes in chloride solutions. Electrochim Acta 28(3):363–36910.1016/0013-4686(83)85135-4 ↗
10. Birss VI, Smith CK (1987) The anodic behavior of silver in chloride solutions—I. The formation and reduction of thin silver chloride films. Electrochim Acta 32(2):259–26810.1016/0013-4686(87)85033-8 ↗
11. Jin X, Lu J, Liu P, Tong H (2003) The electrochemical formation and reduction of a thick AgCl deposition layer on a silver substrate. J Electroanal Chem 542:85–9610.1016/S0022-0728(02)01474-2 ↗
12. Ha H, Payer J (2011) The effect of silver chloride formation on the kinetics of silver dissolution in chloride solution. Electrochim Acta 56(7):2781–279110.1016/j.electacta.2010.12.050 ↗
13. Polk BJ, Stelzenmuller A, Mijares G, MacCrehan W, Gaitan M (2006) Ag/AgCl microelectrodes with improved stability for microfluidics. Sens Actuators B: Chem 114(1):239–24710.1016/j.snb.2005.03.121 ↗
14. Shinwari MW, Zhitomirsky D, Deen IA, Selvaganapathy PR, Deen MJ, Landheer D (2010) Microfabricated reference electrodes and their biosensing applications. Sensors 10(3):1679–171510.3390/s100301679 ↗
15. Shi X, Ye Z, Muthumani A, Zhang Y, Dante JF, Yu H (2015) A corrosion monitoring system for existing reinforced concrete structures (No. FHWA-OR-RD-15-14), Chicago
16. Climent-Llorca MA, Viqueira-Perez E, Lopez-Atalaya MM (1996) Embeddable Ag/AgCl sensors for in situ monitoring chloride contents in concrete. Cem Concr Res 26(8):1157–116110.1016/0008-8846(96)00104-4 ↗
17. Montemor MF, Alves JH, Simoes AM, Fernandes JCS, Lourenço Z, Costa AJS, Appleton AJ, Ferreira MGS (2006) Multiprobe chloride sensor for in situ monitoring of reinforced concrete structures. Cement Concr Compos 28(3):233–23610.1016/j.cemconcomp.2006.01.005 ↗
18. Jin M, Jiang L, Zhu Q (2017) Monitoring chloride ion penetration in concrete with different mineral admixtures based on embedded chloride ion selective electrodes. Constr Build Mater 143:1–1510.1016/j.conbuildmat.2017.03.131 ↗
19. Atkins CP, Carter MA, Scantlebury JD (2001) Sources of error in using silver/silver chloride electrodes to monitor chloride activity in concrete. Cem Concr Res 31(8):1207–121110.1016/S0008-8846(01)00544-0 ↗
20. Stoica D, Brewer PJ, Brown RJ, Fisicaro P (2011) Influence of fabrication procedure on the electrochemical performance of Ag/AgCl reference electrodes. Electrochim Acta 56(27):10009–1001510.1016/j.electacta.2011.08.089 ↗
21. Brewer PJ, Leach AS, Brown RJC (2015) The role of the electrolyte in the fabrication of Ag|AgCl reference electrodes for pH measurement. Electrochim Acta 161:80–8310.1016/j.electacta.2015.02.066 ↗
22. Suzuki H, Hiratsuka A, Sasaki S, Karube I (1998) Problems associated with the thin-film Ag/AgCl reference electrode and a novel structure with improved durability. Sens Actuators B Chem 46(2):104–11310.1016/S0925-4005(98)00043-4 ↗
23. Brewer PJ, Brown RJ (2010) Effect of silver annealing conditions on the performance of electrolytic silver/silver chloride electrodes used in Harned cell measurements of pH. Sensors 10(3):2202–221610.3390/s100302202 ↗
24. Dobos D (1975) Electrochemical data: a handbook for electrochemists in industry and universities. Elsevier, Amsterdam
25. Pargar F, Koleva DA, Kolev H, van Breugel K (2017) Determination of chloride content in cementitious materials: from fundamental aspects to application of Ag/AgCl chloride sensors. Sensors 17(11):248210.3390/s17112482 ↗
26. Koleva DA, Boshkov N, Van Breugel K, De Wit JHW (2011) Steel corrosion resistance in model solutions, containing waste materials. Electrochim Acta 58(1):628–64610.1016/j.electacta.2011.10.010 ↗
27. Koleva DA, Denkova AG, Boshkov N, Van Breugel K (2013) Electrochemical performance of steel in cement extract and bulk matrix properties of cement paste in the presence of Pluronic 123 micelles. J Mater Sci 48(6):2490–2503. https://doi.org/10.1007/s10853-012-7037-310.1007/s10853-012-7037-3 ↗
28. Shirley DA (1972) High-resolution X-ray photoemission spectrum of the valence bands of gold. Phys Rev B 5(12):4709–471410.1103/PhysRevB.5.4709 ↗
29. Scofield JH (1976) Hartree-Slater subshell photoionization cross-sections at 1254 and 1487 eV. J Electron Spectrosc Relat Phenom 8(2):129–13710.1016/0368-2048(76)80015-1 ↗
30. De Mele MFL, Salvarezza RC, Moll VV, Videla HA, Arvia AJ (1986) Kinetics and mechanism of silver chloride electroformation during the localized electrodissolution of silver in solutions containing sodium chloride. J Electrochem Soc 133(4):746–75210.1149/1.2108667 ↗
31. Hills GJ, Schiffrin DJ, Thompson J (1974) Electrochemical nucleation from molten salts—I. Diffusion controlled electrodeposition of silver from alkali molten nitrates. Electrochim Acta 19(11):657–67010.1016/0013-4686(74)80008-3 ↗
32. Fletcher S (1983) Some formulae describing spherical and hemispherical diffusion to small crystals in unstirred solutions. J Cryst Growth 62(3):505–51210.1016/0022-0248(83)90393-7 ↗
33. Pritzker MD (1988) Voltammetric response for the diffusion-controlled electrodeposition onto growing hemispherical nuclei. J Electroanal Chem Interfacial Electrochem 243(1):57–8010.1016/0022-0728(88)85029-0 ↗
34. Isaev VA, Grishenkova OV (2013) Galvanostatic nucleation and growth under diffusion control. J Solid State Electrochem 17(6):1505–150810.1007/s10008-013-2119-y ↗
35. Fleischmann MTHR, Thirsk HR (1959) The potentiostatic study of the growth of deposits on electrodes. Electrochim Acta 1(2–3):146–16010.1016/0013-4686(59)85003-9 ↗
36. Giles RD (1970) The anodic behaviour of silver single crystal electrodes in concentrated chloride solutions. J Electroanal Chem Interfacial Electrochem 27(1):11–1910.1016/S0022-0728(70)80198-X ↗
37. Tilak BV, Perkins RS, Kozlowska HA, Conway BE (1972) Impedance and formation characteristics of electrolytically generated silver oxides—I formation and reduction of surface oxides and the role of dissolution processes. Electrochim Acta 17(8):1447–146910.1016/0013-4686(72)80088-4 ↗
38. Burstein GT, Newman RC (1980) Anodic behaviour of scratched silver electrodes in alkaline solution. Electrochim Acta 25(8):1009–101310.1016/0013-4686(80)87006-X ↗
39. Fletcher S, Halliday CS, Gates D, Westcott M, Lwin T, Nelson G (1983) The response of some nucleation/growth processes to triangular scans of potential. J Electroanal Chem Interfacial Electrochem 159(2):267–28510.1016/S0022-0728(83)80627-5 ↗
40. Boxall LG, Jones HL, Osteryoung RA (1974) Electrochemical studies on Ag, Fe, and Cu species in AlCl3–NaCl melts. J Electrochem Soc 121(2):212–21910.1149/1.2401783 ↗
41. Tuschel DD, Pemberton JE, Cook JE (1986) SERS and SEM of roughened silver electrode surfaces formed by controlled oxidation-reduction in aqueous chloride media. Langmuir 2(4):380–38810.1021/la00070a002 ↗
42. Jovic BM, Jović VD, Dražić DM (1995) Kinetics of chloride ion adsorption and the mechanism of AgCl layer formation on the (111), (100) and (110) faces of silver. J Electroanal Chem 399(1–2):197–20610.1016/0022-0728(95)04291-1 ↗
43. Spangenberg A, Fleig J, Maier J (2001) Electromechanical writing on silver ion conductors. Adv Mater 13(19):1466–146810.1002/1521-4095(200110)13:19<1466::AID-ADMA1466>3.0.CO;2-# ↗
44. Evans JF, Albrecht MG, Ullevig DM, Hexter RM (1980) The physical and chemical characterization of electrochemically reformed silver surfaces. J Electroanal Chem Interfacial Electrochem 106:209–23410.1016/S0022-0728(80)80169-0 ↗
45. Vera G, Climent MA, Anton C, Hidalgo A, Andrade C (2010) Determination of the selectivity coefficient of a chloride ion selective electrode in alkaline media simulating the cement paste pore solution. J Electroanal Chem 639(1–2):43–4910.1016/j.jelechem.2009.11.010 ↗
46. Svegl F, Kalcher K, Grosse-Eschedor YJ, Balonis M, Bobrowski A (2006) Detection of chlorides in pore water of cement based materials by potentiometric sensors. J Rare Metal Mater Eng 35(3):232–237
47. Kaushik VK (1991) XPS core level spectra and Auger parameters for some silver compounds. J Electron Spectrosc Relat Phenom 56(3):273–27710.1016/0368-2048(91)85008-H ↗
48. Ferraria AM, Carapeto AP, Botelho Do Rego AM (2012) X-ray photoelectron spectroscopy: silver salts revisited. Vacuum 86(12):1988–199110.1016/j.vacuum.2012.05.031 ↗
49. Wagner CD (1975) Chemical shifts of auger lines, and the auger parameter, faraday discuss. Chem Soc 60:291–300
50. Hatsukade T, Kuhl KP, Cave ER, Abram DN, Jaramillo TF (2014) Insights into the electrocatalytic reduction of CO2 on metallic silver surfaces. Phys Chem Chem Phys 16(27):13814–1381910.1039/C4CP00692E ↗
51. Gu H, Bennio DN (1977) Diffusion and charge transfer parameters for the Ag/AgCl electrode. J Electrochem Soc 124(9):1364–137010.1149/1.2133655 ↗
52. Pemberton JE, Girand MM (1987) Electrochemical and SEM characterization of Ag electrodes roughened by potential sweep and potential step processes in aqueous chloride and chloride + pyridine media. J Electroanal Chem Interfacial Electrochem 217(1):79–9210.1016/0022-0728(87)85065-9 ↗
53. Baetzold RC, Eachus RS (1995) The possibility of a split interstitial silver ion in AgCl. J Phys: Condens Matter 7(21):3991–3999
54. Cain LS, Slifkin LM (1980) Ionic conductivity of mixed silver halide crystals. J Phys Chem Solids 41(2):173–17810.1016/0022-3697(80)90050-5 ↗
55. Altukhov VK, Shatalov VG (1987) Kinetics of silver oxidation and passivation in chloride solutions. Elektrokhimiya (Electrochemistry) 23(7):912–915
56. Welham NJ, Kelsall GH, Diaz MA (1993) Thermodynamics of Ag–Cl–H2O, Ag–Br–H2O and Ag–I–H2O systems at 298 K. J Electroanal Chem 361(1–2):39–4710.1016/0022-0728(93)87036-U ↗
57. Kolodziej B (2000) The anodic behavior of silver in concentrated chloride solutions. Pol J Chem 74(3):349–360
58. Brolo AG, Sharma SD (2003) Using probe beam deflection (PBD) to investigate the electrochemical oxidation of silver in perchlorate media in the presence and absence of chloride ions. Electrochim Acta 48(10):1375–138410.1016/S0013-4686(03)00003-3 ↗
59. Suzuki H, Taura T (2001) Thin-film Ag/AgCl structure and operational modes to realize long-term storage. J Electrochem Soc 148(12):E468–E47410.1149/1.1416504 ↗