The effect of the TiC particle size on the preferred oxidation temperature for self-healing of oxide ceramic matrix materials
Source abstract
Abstract
The effect of particle size on the oxidation kinetics of TiC powders is studied. Different sizes of TiC powder ranging from nanometre to submillimetre sizes are investigated. The samples are heated at different heating rates from room temperature up to 1200 °C in dry synthetic air. The Kissinger method for analysis of non-isothermal oxidation is used to estimate the activation energy for oxidation of the powders and to identify the active temperature window for efficient self-healing. The master curve plotting method is used to identify the model which best describes the oxidation of TiC powders, and the Senum and Yang method is used to approximate the value for the Arrhenius constant. The oxidation of TiC proceeds via the formation of oxycarbides, anatase and then finally the most stable form: rutile. The activation energy is found to be a strong function of the particle size for particle sizes between 50 nm and 11 µm and becomes constant at larger particle sizes. The data demonstrate how the minimal healing temperature for oxide ceramics containing TiC as healing particles can be tailored between 400 and 1000 °C by selecting the right average TiC particle size.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermal and Kinetic Analysis · Advanced materials and composites · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Yoshioka S, Boatemaa L, van der Zwaag S, Nakao W, Sloof WG (2016) On the use of TiC as high-temperature healing particles in alumina based composites. J Eur Ceram Soc 36(16):4155–4162. https://doi.org/10.1016/j.jeurceramsoc.2016.06.00810.1016/j.jeurceramsoc.2016.06.008 ↗
2. Boatemaa L, Kwakernaak C, van der Zwaag S, Sloof WG (2016) Selection of healing agents for autonomous healing of alumina at high temperatures. J Eur Ceram Soc 36(16):4141–4145. https://doi.org/10.1016/j.jeurceramsoc.2016.05.03810.1016/j.jeurceramsoc.2016.05.038 ↗
3. Ando K, Kim BS, Chu MC, Saito S, Takahashi K (2004) Crack-healing and mechanical behaviour of Al2O3/SiC composites at elevated temperature. Fatigue Fract Eng Mater Struct 27(7):533–541. https://doi.org/10.1111/j.1460-2695.2004.00785.x10.1111/j.1460-2695.2004.00785.x ↗
4. Osada T, Nakao W, Takahashi K, Ando K, Saito S (2007) Strength recovery behavior of machined Al2O3/SiC nano-composite ceramics by crack-healing. J Eur Ceram Soc 27(10):3261–3267. https://doi.org/10.1016/j.jeurceramsoc.2006.11.08010.1016/j.jeurceramsoc.2006.11.080 ↗
5. Ono M, Nakao W, Takahashi K, Nakatani M, Ando K (2007) A new methodology to guarantee the structural integrity of Al2O3/SiC composite using crack healing and a proof test. Fatigue Fract Eng Mater Struct 30(7):599–60710.1111/j.1460-2695.2007.01132.x ↗
6. Ando K, Chu MC, Yao F, Sato S (1999) Fatigue strength of crack-healed Si3N4/SiC composite ceramics. Fatigue Fract Eng Mater Struct 22(10):897–903. https://doi.org/10.1046/j.1460-2695.1999.00210.x10.1046/j.1460-2695.1999.00210.x ↗
7. Salas-Villaseñor AL, Lemus-Ruiz J, Nanko M, Maruoka DM (2009) Crack disappearance by high-temperature oxidation of alumina toughened by Ni nano-particles. Adv Mater Res 68:34–4310.4028/www.scientific.net/AMR.68.34 ↗
8. Nakao W, Abe S (2012) Enhancement of the self-healing ability in oxidation induced self-healing ceramic by modifying the healing agent. Smart Mater Struct 21:1–710.1088/0964-1726/21/2/025002 ↗
9. Farle A, Boatemaa L, Shen L, Gövert S, Kok JBW, Bosch M, Yoshioka S, Svd Zwaag, Sloof WG (2016) Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions. Smart Mater Struct 25(8):08401910.1088/0964-1726/25/8/084019 ↗
10. Lavrenko VA, Glebov LA, Pomitkin AP, Chuprina VG, Protsenko TG (1975) High-temperature oxidation of titanium carbide in oxygen. Oxid Met 9(2):171–179. https://doi.org/10.1007/bf0061323110.1007/bf00613231 ↗
11. Stewart RW, Cutler IB (1967) Effect of temperature and oxygen partial pressure on the oxidation of titanium carbide. J Am Ceram Soc 50(4):176–181. https://doi.org/10.1111/j.1151-2916.1967.tb15076.x10.1111/j.1151-2916.1967.tb15076.x ↗
12. Shimada S (1996) A thermoanalytical study of oxidation of TiC by simultaneous TGA-DTA-MS analaysis. J Mater Sci 31:673–677. https://doi.org/10.1007/BF0036788410.1007/BF00367884 ↗
13. Shimada S, Kozeki M (1992) Oxidation of TiC at low temperatures. J Mater Sci 27(7):1869–1875. https://doi.org/10.1007/BF0110721410.1007/BF01107214 ↗
14. Favergeon L, Morandini J, Pijolat M, Soustelle M (2013) A general approach for kinetic modeling of solid-gas reactions at reactor scale: application to Kaolinite Dehydroxylation. Oil Gas Sci Technol—Rev IFP Energies Nouvelles 68(6):1039–104810.2516/ogst/2012018 ↗
15. Turkdogan ET (1977) Gas-solid reactions, J. Szekely, J. W. Evans and H. Y. Sohn, Academic Press, 1976. 400 pages. AIChE J 23(4):612–612. https://doi.org/10.1002/aic.69023043510.1002/aic.690230435 ↗
16. Xu Z, Sun X, Khaleel MA (2012) A generalized kinetic model for heterogeneous gas-solid reactions. J Chem Phys 137(7):07470210.1063/1.4740242 ↗
17. Brown EM (2001) Introduction to thermal analysis: techniques and applications, introduction to thermal analysis: techniques and applications, 2nd edn. Kluwer, Amsterdam. https://doi.org/10.1007/0-306-48404-810.1007/0-306-48404-8 ↗
18. Khawam A, Flanagan DR (2006) Solid-state kinetic models: basics and mathematical fundamentals. J Phys Chem B 110(35):17315–17328. https://doi.org/10.1021/jp062746a10.1021/jp062746a ↗
19. Lyon RE (1997) An integration method of non-isothermal kinetic analysis. Federal aviation administration, U.S. Department of transportation
20. Senum GI, Yang RT (1977) Rational approximations of the integral of the Arrhenius function. J Therm Anal 11(3):445–447. https://doi.org/10.1007/bf0190369610.1007/bf01903696 ↗
21. Kissinger HE (1957) Reaction kinetics in differential thermal analysis. Anal Chem 29(11):1702–1706. https://doi.org/10.1021/ac60131a04510.1021/ac60131a045 ↗
22. Kissinger HE (1956) Variation of peak temperature with heating rate in differential thermal analysis. J Res Natl Bureau Stand 57(4):217–22110.6028/jres.057.026 ↗
23. Gotor FJ, Criado JM, Malek J, Koga N (2000) Kinetic analysis of solid-state reactions: the Universality of Master plots for analyzing isothermal and nonisothermal experiments. J Phys Chem A 104(46):10777–10782. https://doi.org/10.1021/jp002220510.1021/jp0022205 ↗
24. Sloof WG, Delhez R, de Keijser TH, Schalkoord D, Ramaekers PPJ, Bastin GF (1988) Chemical constitution and microstructure of TiC x coatings chemically vapour deposited on Fe–C substrates; effects of iron and chromium. J Mater Sci 23(5):1660–1672. https://doi.org/10.1007/bf0111570510.1007/bf01115705 ↗
25. Voitovich VB (1997) Mechanism of the high temperature oxidation of titanium carbide. High Temp Mater Process (London). https://doi.org/10.1515/HTMP.1997.16.4.24310.1515/HTMP.1997.16.4.243 ↗
26. Kurlov AS, Gusev AI (2011) Effect of particle size on the oxidation of WC powders during heating. Inorg Mater 47(2):133–138. https://doi.org/10.1134/s002016851102009910.1134/s0020168511020099 ↗
27. Quanli J, Haijun Z, Suping L, Xiaolin J (2007) Effect of particle size on oxidation of silicon carbide powders. Ceram Int 33(2):309–313. https://doi.org/10.1016/j.ceramint.2005.09.01410.1016/j.ceramint.2005.09.014 ↗
28. Phuoc TX, Chen R-H (2012) Modeling the effect of particle size on the activation energy and ignition temperature of metallic nanoparticles. Combust Flame 159(1):416–419. https://doi.org/10.1016/j.combustflame.2011.07.00310.1016/j.combustflame.2011.07.003 ↗
29. Fu Q-S, Xue Y-Q, Cui Z-X, Wang M-F (2014) Study on the size-dependent oxidation reaction kinetics of nanosized zinc sulfide. J Nanomater 2014:8. https://doi.org/10.1155/2014/85648910.1155/2014/856489 ↗
30. Hugosson HW, Eriksson O, Jansson U, Ruban AV, Souvatzis P, Abrikosov IA (2004) Surface energies and work functions of the transition metal carbides. Surf Sci 557(1):243–254. https://doi.org/10.1016/j.susc.2004.03.05010.1016/j.susc.2004.03.050 ↗
31. Villars P, Cenzual K (eds) (2010) Pearson’s crystal data-crystal structure database for inorganic compounds. ASM International, Materials Park, Ohio, USA
32. Šesták J (2011) Rationale and fallacy of thermoanalytical kinetic patterns. J Therm Anal Calorim 110(1):5–16. https://doi.org/10.1007/s10973-011-2089-110.1007/s10973-011-2089-1 ↗
33. Zhang W, Xue Y, Cui Z (2017) Size-dependence of surface thermodynamic functions of nano-Cu by dissolution kinetics. Colloids Surf A 533:81–86. https://doi.org/10.1016/j.colsurfa.2017.07.06410.1016/j.colsurfa.2017.07.064 ↗
34. Cui Z, Duan H, Xue Y, Li P (2015) An investigation of the general regularity of size dependence of reaction kinetics of nanoparticles. J Nanopart Res. https://doi.org/10.1007/s11051-015-3017-210.1007/s11051-015-3017-2 ↗
35. Fu Q, Cui Z, Xue Y (2015) Size dependence of the thermal decomposition kinetics of nano-CaC2O4: a theoretical and experimental study. Eur Phys J Plus. https://doi.org/10.1140/epjp/i2015-15212-410.1140/epjp/i2015-15212-4 ↗