In vitro cytocompatibility and corrosion resistance of zinc-doped hydroxyapatite coatings on a titanium substrate
Source abstract
Abstract
To improve biocompatibility and corrosion resistance during the initial implantation stage, zinc-substituted hydroxyapatite (ZnHAp) coating was fabricated on pure titanium by the electrolytic deposition method. The morphology, microstructure and chemical composition of the coating were investigated by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis and Fourier transform infrared spectroscopy. The prepared ZnHAp crystals were calcium deficient and were carbonated owing to the incorporation of some Zn2+. This incorporation of Zn2+ into the HAp significantly reduced porosity and caused the coating to become noticeably denser. In addition, the Zn2+ ions were homogeneously distributed in the coating. The potentiodynamic polarisation test revealed that the ZnHAp-coated surface showed superior corrosion resistance over that of the HAp-coated surface and bare Ti. The in vitro bioactivity was evaluated in a simulated body fluid, which revealed that the ZnHAp coating can rapidly induce bone-like apatite formation of nuclear and growth features. In addition, the cell response tests showed that the MC3T3-E1 cells on the ZnHAp coating clearly enhanced the in vitro cytocompatibility of Ti compared with the same cells on HAp coating. ZnHAp coating was thus beneficial for improving biocompatibility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Zhang RY, Cai S, Xu GH et al (2014) Crack self-healing of phytic acid conversion coating on AZ31 magnesium alloy by heat treatment and the corrosion resistance. Appl Surf Sci. doi: 10.1016/j.apsusc.2014.06.10410.1016/j.apsusc.2014.06.104 ↗
2. Yan YJ, Ding QQ, Huang Y et al (2014) Magnesium substituted hydroxyapatite coating on titanium with nanotublar TiO2 intermediate layer via electrochemical deposition. Appl Surf Sci 305:77–8510.1016/j.apsusc.2014.02.163 ↗
3. Surmenev RA, Surmeneva MA, Ivanova AA (2014) Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis—a review. Acta Biomater 10:557–57910.1016/j.actbio.2013.10.036 ↗
4. da Prado Silva MH, Moura FN, da Navarro Rocha D et al (2014) Zinc-modified hydroxyapatite coatings obtained from parascholzite alkali conversion. Surf Coat Technol 249:109–11710.1016/j.surfcoat.2014.03.052 ↗
5. Bir F, Khireddine H, Touati A et al (2012) Electrochemical depositions of fluorohydroxyapatite doped by Cu2+, Zn2+, Ag+ on stainless steel substrates. Appl Surf Sci 258:7021–703010.1016/j.apsusc.2012.03.158 ↗
6. Gopi D, Ramya S, Rajeswari D et al (2014) Strontium, cerium co-substituted hydroxyapatite nanoparticles: synthesis, characterization, antibacterial activity towards prokaryotic strains and in vitro studies. Colloid Surf A 451:172–18010.1016/j.colsurfa.2014.03.035 ↗
7. Sharifnabi A, Fathi MH, Yekta BE et al (2014) The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainlesssteel human body implant. Appl Surf Sci 288:331–34010.1016/j.apsusc.2013.10.029 ↗
8. Gopi D, Karthika A, Nithiya S et al (2014) In vitro biological performance of minerals substituted hydroxyapatite coating by pulsed electrodeposition method. Mater Chem Phys 144:75–8510.1016/j.matchemphys.2013.12.017 ↗
9. Sutha S, Karunakaran G, Rajendran V (2013) Enhancement of antimicrobial and long-term biostability of the zinc-incorporated hydroxyapatite coated 316L stainless steel implant for biomedical application. Ceram Int 39:5205–521210.1016/j.ceramint.2012.12.019 ↗
10. Chen HY, Zhang EL, Yang K (2014) Microstructure, corrosion properties and bio-compatibility of calcium zinc phosphate coating on pure iron for biomedical application. Mater Sci Eng C 34:201–20610.1016/j.msec.2013.09.010 ↗
11. Sankavaram K, Freake HC (2012) The effects of transformation and ZnT-1 silencing on zinc homeostasis in cultured cells. J Nutr Biochem 23:629–63410.1016/j.jnutbio.2011.03.006 ↗
12. Vallee BL, Falchuk KH (1993) The biochemical basis of zinc physiology. Physiol Rev 73:79–11810.1152/physrev.1993.73.1.79 ↗
13. Venkatasubbu GD, Ramasamy S, Ramakrishnan V et al (2011) Nanocrystalline hydroxyapatite and zinc-doped hydroxyapatite as carrier material for controlled delivery of ciprofloxacin. Biotech 1:173–186
14. Venkatasubbu GD, Ramasamy S, Avadhani GSV et al (2012) Size-mediated cytotoxicity of nanocrystalline titanium dioxide, pure and zinc-doped hydroxyapatite nanoparticles in human hepatoma cells. J Nanopart Res 14:81910.1007/s11051-012-0819-3 ↗
15. Hashizume M, Yamaguchi M (1993) Stimulatory effect of beta-alanyl-l-histidinato zinc on cell proliferation is dependent on protein synthesis in osteoblastic MC3T3-E1 cells. Mol Cell Biochem 122:59–6410.1007/BF00925737 ↗
16. Prasad AS, Beck FW, Endre L et al (1996) Zinc deficiency affects cell cycle and deoxythymidine kinase gene expression in HUT-78 cells. J Lab Clin Med 128:51–6010.1016/S0022-2143(96)90113-4 ↗
17. Sun GF, Ma J, Zhang SM (2014) Electrophoretic deposition of zinc-substituted hydroxyapatite coatings. Mater Sci Eng C 39:67–7210.1016/j.msec.2014.02.023 ↗
18. Erakovic S, Veljovic D, Diouf PN et al (2012) The effect of lignin on the structure and characteristics of composite coatings electrodeposited on titanium. Prog Org Coat 75:275–28310.1016/j.porgcoat.2012.07.005 ↗
19. Song YW, Shan DY, Han EH (2013) A novel biodegradable nicotinic acid/calcium phosphate composite coating on Mg–3Zn alloy. Mater Sci Eng C 33:78–8410.1016/j.msec.2012.08.008 ↗
20. Huang Y, Yan YJ, Pang XF (2013) Electrolytic deposition of fluorine-doped hydroxyapatite/ZrO2 films on titanium for biomedical applications. Ceram Int 39:245–25310.1016/j.ceramint.2012.06.017 ↗
21. Huang Y, Han SG, Pang XF et al (2013) Electrodeposition of porous hydroxyapatite/calcium silicate composite coating on titanium for biomedical applications. Appl Surf Sci 271:299–30210.1016/j.apsusc.2013.01.187 ↗
22. Djosic MS, Panic V, Stojanovica J et al (2012) The effect of applied current density on the surface morphology of deposited calcium phosphate coatings on titanium. Colloid Surf A 400:36–4310.1016/j.colsurfa.2012.02.040 ↗
23. Bakhsheshi-Rad HR, Idris MH, Abdul-Kadir MR (2013) Synthesis and in vitro degradation evaluation of the nano-HA/MgF2 and DCPD/MgF2 composite coating on biodegradable Mg–Ca–Zn alloy. Surf Coat Technol 222:79–8910.1016/j.surfcoat.2013.02.007 ↗
24. Wang HX, Zhu SJ, Wang LG et al (2014) Formation mechanism of Ca-deficient hydroxyapatite coating on Mg–Zn–Ca alloy for orthopaedic implant. Appl Surf Sci 307:92–10010.1016/j.apsusc.2014.03.172 ↗
25. Huang Y, Ding QQ, Han SG et al (2013) Characterisation, corrosion resistance and in vitro bioactivity of manganese-doped hydroxyapatite films electrodeposited on titanium. J Mater Sci Mater Med 24:1853–186410.1007/s10856-013-4955-9 ↗
26. Kokubo T, Takadama H (2006) How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27:2907–291510.1016/j.biomaterials.2006.01.017 ↗
27. Rojaee R, Fathi M, Raeissi K (2013) Electrophoretic deposition of nanostructured hydroxyapatite coating on AZ91 magnesium alloy implants with different surface treatments. Appl Surf Sci 285:664–67310.1016/j.apsusc.2013.08.108 ↗
28. Kokubo T (2005) Design of bioactive bone substitutes based on biomineralization process. Mater Sci Eng C 25:97–10410.1016/j.msec.2005.01.002 ↗
29. Blackwood DJ, Seah KHW, Han EH (2009) Electrochemical cathodic deposition of hydroxyapatite: improvements in adhesion and crystallinity. Mater Sci Eng C 29:1233–123810.1016/j.msec.2008.10.015 ↗
30. Nishiguchi S, Fujibayashi S, Kim HM et al (2003) Biology of alkali-and heat-treated titanium implants. J Biomed Mater Res A 67:26–3510.1002/jbm.a.10540 ↗
31. Lakstein D, Kopelovitch W, Barkay Z et al (2009) Enhanced osseointegration of grit-blasted, NaOH-treated and electrochemically hydroxyapatite-coated Ti–6Al–4V implants in rabbits. Acta Biomater 5:2258–226910.1016/j.actbio.2009.01.033 ↗
32. Zhao QM, Guo X, Dang XQ et al (2013) Preparation and properties of composite MAO/ECD coatings on magnesium alloy. Colloid Surf B 102:321–32610.1016/j.colsurfb.2012.07.040 ↗
33. Suganthi RV, Elayaraja K, Joshy MIA et al (2011) Fibrous growth of strontium substituted hydroxyapatite and its drug release. Mater Sci Eng C 31:593–59910.1016/j.msec.2010.11.025 ↗
34. Batra U, Kapoor S, Sharma S (2012) Influence of magnesium ion substitution on structural and thermal behavior of nanodimensional hydroxyapatite. J Mater Eng Perform 22:1798–180610.1007/s11665-012-0462-2 ↗
35. Hu W, Ma J, Wang JG et al (2012) Fine structure study on low concentration zinc substituted hydroxyapatite nanoparticles. Mater Sci Eng C 32:2404–241010.1016/j.msec.2012.07.014 ↗
36. Uysal I, Severcan F, Evis Z (2013) Characterization by Fourier transform infrared spectroscopy of hydroxyapatite co-doped with zinc and fluoride. Ceram Int 39:7727–773310.1016/j.ceramint.2013.03.029 ↗
37. Nathanael AJ, Mangalaraj D, Chen PC et al (2011) Enhanced mechanical strength of hydroxyapatite nanorods reinforced with polyethylene. J Nanopart Res 13:1841–185310.1007/s11051-010-9932-3 ↗
38. Zima A, Paszkiewicz Z, Siek D et al (2012) Study on the new bone cement based on calcium sulfate and Mg, CO3 doped hydroxyapatite. Ceram Int 38:4935–494210.1016/j.ceramint.2012.02.086 ↗
39. Morales-Nietoa V, Navarro CH, Moreno KJ et al (2013) Poly(methyl methacrylate)/carbonated hydroxyapatite composite applied as coating on ultra high molecular weight polyethylene. Prog Org Coat 76:204–20810.1016/j.porgcoat.2012.09.007 ↗
40. Iqbal N, Kadir MRA, Mahmood NH et al (2014) Characterization, antibacterial and in vitro compatibility of zinc–silver doped hydroxyapatite nanoparticles prepared through microwave synthesis. Ceram Int 40:4507–451310.1016/j.ceramint.2013.08.125 ↗
41. Narayanan R, Seshadri SK, Kwon TY et al (2008) Calcium phosphate-based coatings on titanium and its alloys. J Biomed Mater Res B 85:279–29910.1002/jbm.b.30932 ↗
42. Xie JH, Luan BL, Wang JF et al (2008) Novel hydroxyapatite coating on new porous titanium and titanium-HDPE composite for hip implant. Surf Coat Technol 202:2960–296810.1016/j.surfcoat.2007.10.040 ↗
43. Jiang HC, Rong LJ (2006) Effect of hydroxyapatite coating on nickel release of the porous NiTi shape memory alloy fabricated by SHS method. Surf Coat Technol 201:1017–102110.1016/j.surfcoat.2006.01.015 ↗
44. Gopi D, Ramya S, Rajeswari D et al (2013) Corrosion protection performance of porous strontium hydroxyapatite coating on polypyrrole coated 316L stainless steel. Colloid Surf B 107:130–13610.1016/j.colsurfb.2013.01.065 ↗
45. Pang X, Zhitomirsky I (2005) Electrodeposition of composite hydroxyapatite–chitosan films. Mater Chem Phys 94:245–25110.1016/j.matchemphys.2005.04.040 ↗
46. Yugeswaran S, Yoganand CP, Kobayashi A et al (2012) Mechanical properties, electrochemical corrosion and in vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying. J Mech Behav Biomed 9:22–3310.1016/j.jmbbm.2011.11.002 ↗
47. Ashok M, Sundaram NM, Kalkura SN (2003) Crystallization of hydroxyapatite at physiological temperature. Mater Lett 57:2066–207010.1016/S0167-577X(02)01140-0 ↗
48. Trommera RM, Santosb LA, Bergmann CP (2009) Nanostructured hydroxyapatite powders produced by a flame-based technique. Mater Sci Eng C 29:1770–177510.1016/j.msec.2009.02.006 ↗
49. Müller L, Müller FA (2006) Preparation of SBF with different HCO3- content and its influence on the composition of biomimetic apatites. Acta Biomater 2:181–18910.1016/j.actbio.2005.11.001 ↗
50. Stoch A, Jastrzebski W, Brozek A et al (2000) FTIR absorption–reflection study of biomimetic growth of phosphates on titanium implants. J Mol Struct 555:375–38210.1016/S0022-2860(00)00623-2 ↗
51. Kuriakose TA, Kalkura SN, Palanichamy M et al (2004) Synthesis of stoichiometric nano crystalline hydroxyapatite by ethanol-based sol–gel technique at low temperature. J Cryst Growth 263:517–52310.1016/j.jcrysgro.2003.11.057 ↗
52. Alcantara EH, Shin MY, Feldmann J et al (2013) Long-term zinc deprivation accelerates rat vascular smooth muscle cell proliferation involving the down-regulation of JNK1/2 expression in MAPK signaling. Atherosclerosis 228:46–5210.1016/j.atherosclerosis.2013.01.030 ↗
53. Horiuchi S, Hiasa M, Yasue A et al (2014) Fabrications of zinc-releasing biocement combining zinc calcium phosphate to calcium phosphate cement. J Mech Behav Biomed Mater 29:151–16010.1016/j.jmbbm.2013.09.005 ↗
54. Hondal Y, Anada T, Morimoto S et al (2013) Labile Zn ions on octacalcium phosphate-derived Zn-containing hydroxyapatite surfaces. Appl Surf Sci 273:343–34810.1016/j.apsusc.2013.02.040 ↗
55. Ito A, Ojima K, Naito H et al (2000) Preparation, solubility, and cytocompatibility of zinc-releasing calcium phosphate ceramics. J Biomed Mater Res 50:178–18310.1002/(SICI)1097-4636(200005)50:2<178::AID-JBM12>3.0.CO;2-5 ↗
56. Wang X, Ito A, Sogo Y et al (2010) zinc-containing apatite layers on external fixation rods promoting cell activity. Acta Biomater 6:962–96810.1016/j.actbio.2009.08.038 ↗
57. Hayakawa T, Yoshinari M, Kiba H et al (2002) Trabecular bone response to surface roughened and calcium phosphate (Ca–P) coated titanium implants. Biomaterials 23:1025–103110.1016/S0142-9612(01)00214-9 ↗
58. Kunzler TP, Drobek T, Schuler M et al (2007) Systematic study of osteoblast and fibroblast response to roughness by means of surface-morphology gradients. Biomaterials 28:2175–218210.1016/j.biomaterials.2007.01.019 ↗