Nanocrystalline alumina dispersed in nanocrystalline nickel: enhanced mechanical properties
Source abstract
Abstract
Nickel–alumina nano-composites have been electrochemically deposited by pulse plating from a suspension of nano-Al2O3 in a Watts-type electrolyte. The influence of duty cycle and amount of suspended Al2O3 on the content of Al2O3 in the deposit was studied. With an optimized set of plating parameters, the influences of additives on wear resistance, hardness and the deformation behaviour (quasistatic and dynamic compression tests) of these nickel–alumina nano-composites in comparison to pure nano-nickel were investigated. The addition of Al2O3 tripled the yield stress and improved the hardness up to twice the value of pure nickel. Due to its high hardness and stiffness, the nickel–alumina composites deposited with the additive naphthalene-1,3,6-trisulfonic acid trisodium salt in the electrolyte are appropriate to wear resistant coating. Nickel–alumina nano-composites deposited without any additives are hard and at the same time ductile and so considered as ideal structural materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Sinha PK, Dhananjayan N, Chakrabarti HK (1973) Plat 60:55
2. Bahrololoom ME, Sani R (2005) Surf Coat Technol 192:15410.1016/j.surfcoat.2004.09.023 ↗
3. Muller B, Ferkel H (2000) Mater Sci Forum 343–346:47610.4028/www.scientific.net/MSF.343-346.476 ↗
4. Benea L (1999) Mater Manuf Processes 14:23110.1080/10426919908914820 ↗
5. Gay PA, Bercot P, Pagetti J (2001) Surf Coat Technol 140:14710.1016/S0257-8972(01)01043-X ↗
6. Moller A, Hahn H (1999) Nanostruct Mater 12:25910.1016/S0965-9773(99)00112-9 ↗
7. Joshi MN, Totalani M (1979) J Electrochem Soc India 28:35
8. Babu GNKR, Muralidharan VS, Vasu KI (1991) Plat and Surf Finish 78:126
9. Medeliene V, Juskenas R, Kurtinaitiene M et al (2004) Pol J Chem 78:1305
10. Kaisheva M, Fransaer J (2004) J Electrochem Soc 151:C8910.1149/1.1632479 ↗
11. Ibrahim KM, Aal AA, Hamid ZA (2005) Int J Cast Met Res 18:31510.1179/136404605225023090 ↗
12. Hu F, Chan KC (2004) Appl Surf Sci 233:16310.1016/j.apsusc.2004.03.013 ↗
13. Surender M, Balasubramaniam R, Basu B (2004) Surf Coat Technol 187:9310.1016/j.surfcoat.2004.01.030 ↗
14. Stroumbouli M, Gyftou P, Pavlatou EA et al (2005) Surf Coat Technol 195:32510.1016/j.surfcoat.2004.06.034 ↗
15. Surender M, Basu B, Balasubramaniam R (2004) Advances in surface treatment: research & applications (ASTRA). Proceedings of the international conference, Hyderabad, India, Nov 3–6, 2003, p 130
16. Endrino JL, Nainaparampil JJ, Krzanowski JE (2002) Surf Coat Technol 157:9510.1016/S0257-8972(02)00138-X ↗
17. Eroglu S, Gallois B (1995) J Mater Sci 30:1754. doi: https://doi.org/10.1007/BF0035160610.1007/BF00351606 ↗
18. AbiAkar H, Riley C, Maybee G (1996) Chem Mater 8:260110.1021/cm950483j ↗
19. Helle K, Walsh F (1997) Trans Inst Met Finish 75:5310.1080/00202967.1997.11871143 ↗
20. Lee EC, Moon IT (2002) Plat Surf Finish 89:55
21. Szeptycka B, Gajewska-Midzialek A (2007) Rev Adv Mater Sci 14:135
22. Tang NK, Zhao WZ (2007) Surf Eng 23:15710.1179/174329406X150431 ↗
23. Wang F, Arai S, Endo M (2004) Mater Trans 45:131110.2320/matertrans.45.1311 ↗
24. Chen XH, Chen CS, Xiao HN et al (2005) Surf Coat Technol 191:35110.1016/j.surfcoat.2004.04.055 ↗
25. Chen XH, Cheng FQ, Li SL et al (2002) Surf Coat Technol 155:27410.1016/S0257-8972(02)00118-4 ↗
26. Guo C, Zuo Y, Zhao XH et al (2007) Surf Coat Technol 201:949110.1016/j.surfcoat.2007.04.004 ↗
27. Chang YC, Chang YY, Lin CI (1998) Electrochim Acta 43:31510.1016/S0013-4686(97)00072-8 ↗
28. Chang YY, Lin CI, Chang YC (1997) J Chin Inst Chem Eng 28:245
29. Periene N, Cesuniene A, Ramanauskiene D et al (1994) Bull Electrochem 10:486
30. Szczygiel B, Kolodziej M (2005) Electrochim Acta 50:418810.1016/j.electacta.2005.01.040 ↗
31. Wang Y, Xu Z (2006) Surf Coat Technol 200:389610.1016/j.surfcoat.2005.06.025 ↗
32. Leo NT, Chen WP, Xiao ZY et al (2002) Trans Nonferrous Met Soc China 12:886
33. Dong SR, Tu JP, Zhang XB (2001) Mater Sci Eng A A313:8310.1016/S0921-5093(01)00963-7 ↗
34. Feng Y, Yuan HL, Zhang M (2005) Mater Charact 55:21110.1016/j.matchar.2005.05.003 ↗
35. Schulz P (2007) Verbundwerkstoffe mit Metallmatrix. in “CCG-Seminar WB 6.06: Werkstoffe für neue Schutztechnologien”. Carl-Cranz-Gesellschaft, Freiburg
36. Lach E (2007) MMC- und C/C-Werkstoffe dynamische und ballistische Eigenschaften, in “CCG-Seminar WB 6.06: Werkstoffe für neue Schutztechnologien”. Carl-Cranz-Gesellschaft, Freiburg
37. Gupta S, Roy RK, Chowdhury MP et al (2004) Vac 75:11110.1016/j.vacuum.2004.01.075 ↗
38. Turunen E, Keskinen J, Heczko O et al (2006) Adv Eng Mater 8:66910.1002/adem.200600047 ↗
39. Hannula SP, Turunen E, Keskinen J et al (2006) Sci Eng Ceram 317–318:539
40. Krueger HG, Knote A, Schindler U et al (2004) J Mater Sci 39:839. doi: https://doi.org/10.1023/B:JMSC.0000012912.96350.d210.1023/B:JMSC.0000012912.96350.d2 ↗
41. Sarkar P, Datta S, Nicholson PS (1997) Ceram Trans 85:231
42. Sarkar P, Datta S, Nicholson PS (1997) Composites Part B 28B:4910.1016/S1359-8368(96)00022-4 ↗
43. Ehrhardt J (1983) Oberfl-Surf 24:338
44. Natter H, Schmelzer M, Hempelmann R (1998) J Mater Res 13:118610.1557/JMR.1998.0169 ↗
45. Natter H, Hempelmann R (2003) Electrochim Acta 49:5110.1016/j.electacta.2003.04.004 ↗
46. Withers JC (1962) Prod Finish 26:62
47. Vereecken PM, Shao I, Searson PC (2000) J Electrochem Soc 147:257210.1149/1.1393570 ↗
48. O’Brien DJ, Martin PW, Williams RV (1966) Appl Mater Res 5:241
49. Brandes EA, Goldthorpe D (1967) Metalurgia (Bucharest) 76:195
50. Guglielmi N (1972) J Electrochem Soc 119:100910.1149/1.2404383 ↗
51. Celis JP, Roos JR, Buelens C (1987) J Electrochem Soc 134:140210.1149/1.2100680 ↗
52. Hornbogen E (1985) Czech J Phys B 35:19310.1007/BF01605082 ↗
53. Georgiev G, Kamenova I, Georgieva V et al (2006) Godishnik na Sofiiskiya Universitet 98–99:159
54. Gladman T (1999) Mater Sci Technol 15:3010.1179/026708399773002782 ↗
55. Orowan E (1948) Symposium on internal stresses in metals and alloys. Institute of Metals, London, p 451
56. Nembach E (1997) Particle strengthening of metals and alloys. John Wiley and Sons, New York
57. Chruschtchow MM (1957) Proc Conf Lub Wear, p 655
58. Lach E, Radjaimia A, Leitner H et al (2006) J Phys IV Proc 134:839
59. Fischer H (1954) Elektrolytische Abscheidung und Elektrokristallisation von Metallen10.1007/978-3-642-86549-7 ↗
60. Lichtenberger A, Gazeaud G, Lach E (1988) In Dymat 88, Ajaccio