The microstructure and elevated temperature strength of tungsten-titanium carbide composite

A new tungsten matrix composite containing 30 vol% titanium carbide particles (W-TiC) produced by sintering under 20 MPa pressure at 2000°C in a vacuum has been developed in order to improve the elevated temperature strength of tungsten. Flexural strength tests of the W-TiC composite in the temperature range 20–1200°C showed that the strength was significantly increased by the presence of TiC particles. The flexural strength at 1000°C was 1155 MPa, which was much higher than that at 20°C (770 MPa). Microstructural observations showed that a interdiffusion zone was produced at the W matrix-TiC particle interface, and a strong bond was formed between TiC and W, which was very beneficial to the elevated temperature mechanical properties. The mechanisms of fracture at 20°C and 1000°C were investigated. The fracture at 20°C was brittle. There was a growth-coalescence process for the initial cracks during the fracture process of the W-TiC composite at 1000°C, and the W matrix exhibited ductile tearing. The excellent elevated temperature strength of W-TiC composite was attributed to the brittle-ductile transition in the W matrix, which allows more effective strengthening from TiC particles.