Preparation of highly hydrophilic PVA/SBA-15 composite materials and their adsorption behavior toward cationic dye: effect of PVA content
Source abstract
Abstract
This work focuses on the preparation of highly hydrophilic polyvinyl alcohol/SBA-15 composites by impregnation method. In order to study the effect of polyvinyl alcohol (PVA) on the structural, textural properties of composites, several percentages of PVA were impregnated into the surface of the mesoporous silica SBA-15. The obtained composites were characterized by different physicochemical techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen adsorption-desorption at 77 K adsorption–desorption at 77 K, thermogravimetric analysis (TGA) and scanning electronic microscopy (SEM). The obtained results showed that the structure of SBA-15 was swollen after PVA impregnation, confirming the dispersion of PVA inside the pores. The higher percentages of PVA lead to the decrease in the lattice parameter which results in the formation of PVA aggregates outside the surface. TGA analysis has shown improvement in the hydrophilic character of resulting composite, and this affinity via the water molecules is the result of the increase in number of –OH groups. The obtained composites were used for the adsorption of methylene blue (MB) dye. Effects of contact time, PVA content, adsorbent mass and initial dye concentration were investigated and discussed in terms of adsorption capacity. The experimental data were fitted by pseudo-first-order and pseudo-second-order models and verified by the Langmuir and Freundlich isotherms. The results showed that the adsorption of MB dye on composites followed Langmuir adsorption isotherm models and pseudo-second-order kinetics. The best adsorption capacity of MB dye recorded is ~ 77 mg/g for composite PVA/SBA-15(30%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Polymer Nanocomposite Synthesis and Irradiation · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Schweitzer L, Noblet J (2018) Chapter 3.6—Water contamination and pollution. Green Chem 1:261–290. https://doi.org/10.1016/B978-0-12-809270-5.00011-X10.1016/B978-0-12-809270-5.00011-X ↗
2. Vikrant K, Giri BS, Raza N, Roy K, Kim KH, Nath Rai B, Singh RS (2018) Recent advancements in bioremediation of dye: current status and challenges. Bioresour Technol 253:355–36710.1016/j.biortech.2018.01.029 ↗
3. Rawat D, Mishra V, Sharma RS (2016) Detoxification of azo dyes in the context of environmental processes. Chemosphere 155:591–60510.1016/j.chemosphere.2016.04.068 ↗
4. Wainwright M (2017) The problem with dyes in infection control. Dyes Pigm 146:402–40710.1016/j.dyepig.2017.07.042 ↗
5. Jiao J, Wang J, Li M, Li J, Li Q, Quan Q, Chen J (2016) Simultaneous determination of three azo dyes in food product by ion mobility spectrometry. J Chromatogr B 1025:105–10910.1016/j.jchromb.2016.05.002 ↗
6. Zhu J, Deng C, Jiang H, Zheng Z, Gong R, Bi Y, Zhang L, Lin R (2016) The impact of fluorescent dyes on the performances of polystyrene-based plastic scintillators. Nucl Instrum Methods Phys Res Sect A 835:136–14110.1016/j.nima.2016.08.018 ↗
7. Burnier P, Niddam J, Bosc R, Hersant B, Meningaud JP (2017) Indocyanine green applications in plastic surgery: a review of the literature. J Plast Reconstr Aesthet Surg 70:814–82710.1016/j.bjps.2017.01.020 ↗
8. Shindy HA (2017) Fundamentals in the chemistry of cyanine dyes: a review. Dyes Pigment 145:505–51310.1016/j.dyepig.2017.06.029 ↗
9. Ritter EE, Dickinson ME, Harron JP, Lunderberg DM, DeYoung PA, Robel AE, Field JA, Peaslee GF (2017) PIGE as a screening tool for per-and polyfluorinated substances in papers and textiles. Nucl Instrum Methods Phys Res Sect B 407:47–5410.1016/j.nimb.2017.05.052 ↗
10. Hamoud HI, Finqueneisel G, Azambre B (2017) Removal of binary dyes mixtures with opposite and similar charges by adsorption, coagulation/flocculation and catalytic oxidation in the presence of CeO2/H2O2 Fenton-like system. J Environ Manag 195:195–20710.1016/j.jenvman.2016.07.067 ↗
11. Kessouri A, Boukoussa B, Bengueddach A, Hamacha R (2018) Synthesis of iron-MFI zeolite and its photocatalytic application for hydroxylation of phenol. Res Chem Intermed 44:2475–248710.1007/s11164-017-3241-8 ↗
12. Bellatreche S, Hasnaoui A, Boukoussa B, García-Aguilar J, Berenguer-Murcia Á, Cazorla-Amoros D, Bengueddach A (2016) Structural and textural features of TiO2/SAPO-34 nanocomposite prepared by the sol–gel method. Res Chem Intermed 42:8039–805310.1007/s11164-016-2577-9 ↗
13. Hameed BB, Ismail ZZ (2018) Decolorization, biodegradation and detoxification of reactive red azo dye using non-adapted immobilized mixed cells. Biochem Eng J 137:71–7710.1016/j.bej.2018.05.018 ↗
14. Li J, Gong JL, Zeng GM, Zhang P, Song B, Cao WC, Liu HY, Huan SY (2018) Zirconium-based metal organic frameworks loaded on polyurethane foam membrane for simultaneous removal of dyes with different charges. J Colloid Interface Sci 527:267–27910.1016/j.jcis.2018.05.028 ↗
15. Hassani KE, Kalnina D, Turks M, Beakou BH, Anouar A (2019) Enhanced degradation of an azo dye by catalytic ozonation over Ni-containing layered double hydroxide nanocatalyst. Sep Purif Technol 210:764–77410.1016/j.seppur.2018.08.074 ↗
16. Nidheesh PV, Zhou M, Oturan MA (2018) An overview on the removal of synthetic dyes from water by electrochemical advanced oxidation processes. Chemosphere 197:210–22710.1016/j.chemosphere.2017.12.195 ↗
17. Hassan MM, Carr CM (2018) A critical review on recent advancements of the removal of reactive dyes from dyehouse effluent by ion-exchange adsorbents. Chemosphere 209:201–21910.1016/j.chemosphere.2018.06.043 ↗
18. Hussain I, Li Y, Qi J, Li J, Wang L (2018) Nitrogen-enriched carbon sheet for Methyl blue dye adsorption. J Environ Manag 215:123–13110.1016/j.jenvman.2018.03.051 ↗
19. Hamza W, Dammak N, Bel Hadjltaief H, Eloussaief M, Benzina M (2018) Sono-assisted adsorption of cristal violet dye onto Tunisian smectite clay: characterization, kinetics and adsorption isotherms. Ecotoxicol Environ Saf 163:365–37110.1016/j.ecoenv.2018.07.021 ↗
20. Fardjaoui NEH, El Berrichi FZ, Ayari F (2017) Kaolin-issued zeolite A as efficient adsorbent for bezanyl yellow and nylomine green anionic dyes. Microporous Mesoporous Mater 243:91–10110.1016/j.micromeso.2017.01.008 ↗
21. Boukoussa B, Hamacha R, Morsli A, Bengueddach A (2017) Adsorption of yellow dye on calcined or uncalcined Al-MCM-41 mesoporous materials. Arab J Chem 10:S2160–S216910.1016/j.arabjc.2013.07.049 ↗
22. Boukoussa B, Hakiki A, Moulai S, Chikh K, Kherroub DE, Bouhadjar L, Guedal D, Messaoudi K, Mokhtar F, Hamacha R (2018) Adsorption behaviors of cationic and anionic dyes from aqueous solution on nanocomposite polypyrrole/SBA-15. J Mater Sci 53:7372–7386. https://doi.org/10.1007/s10853-018-2060-710.1007/s10853-018-2060-7 ↗
23. Benhamou A, Baudu M, Derriche Z, Basly JP (2009) Aqueous heavy metals removal on amine-functionalized Si-MCM-41 and Si-MCM-48. J Hazard Mater 171:1001–100810.1016/j.jhazmat.2009.06.106 ↗
24. Benhamou A, Basly JP, Baudu M, Derriche Z, Hamacha R (2013) Amino-functionalized MCM-41 and MCM-48 for the removal of chromate and arsenate. J Colloid Interface Sci 404:135–13910.1016/j.jcis.2013.04.026 ↗
25. Boukoussa B, Hakiki A, Nunes-Beltrao AP, Hamacha R, Azzouz A (2018) Assessment of the intrinsic interactions of nanocomposite polyaniline/SBA-15 with carbon dioxide: correlation between the hydrophilic character and surface basicity. J CO2 Util 26:171–17810.1016/j.jcou.2018.05.006 ↗
26. Boukoussa B, Zeghada S, Bentabed Ababsa G, Hamacha R, Derdour A, Bengueddach A, Mongin F (2015) Catalytic behavior of surfactant-containing-MCM-41 mesoporous materials for cycloaddition of 4-nitrophenyl azide. Appl Catal A 489:131–13910.1016/j.apcata.2014.10.022 ↗
27. Ouargli-Saker R, Bouazizi N, Boukoussa B, Barrimo D, Nunes-Beltrao AP, Azzouz A (2017) Metal-loaded SBA-16-like silica—Correlation between basicity and affinity towards hydrogen. Appl Surf Sci 411:476–48610.1016/j.apsusc.2017.03.165 ↗
28. Ghomari K, Boukoussa B, Hamacha R, Bengueddach A, Roy R, Azzouz A (2017) Preparation of dendrimer polyol/mesoporous silica nanocomposite for reversible CO2 adsorption: effect of pore size and polyol content. Sep Sci Technol 52:2421–242810.1080/01496395.2017.1367810 ↗
29. Boukoussa B, Kibou Z, Abid Z, Ouargli R, Choukchou-Braham N, Villemin D, Bengueddach A, Hamacha R (2018) Key factor affecting the basicity of mesoporous silicas MCM-41: effect of surfactant extraction time and Si/Al ratio. Chem Pap 72:289–29910.1007/s11696-017-0279-4 ↗
30. Sekkiou H, Boukoussa B, Ghezini R, Khenchoul Z, Ouali A, Hamacha R, Bengueddach A (2016) Enhanced hydrogen storage capacity of copper containing mesoporous silicas prepared using different methods. Mater Res Express 3:08550110.1088/2053-1591/3/8/085501 ↗
31. Hakiki A, Boukoussa B, Habib Zahmani H, Hamacha R, Hadj Abdelkader NEH, Bekkar F, Bettahar F, Nunes-Beltrao AP, Hacini S, Bengueddach A, Azzouz A (2018) Synthesis and characterization of mesoporous silica SBA-15 functionalized by mono-, di-, and tri-amine and its catalytic behavior towards Michael addition. Mater Chem Phys 212:415–42510.1016/j.matchemphys.2017.12.039 ↗
32. Wang J, Ge H, Bao W (2015) Synthesis and characteristics of SBA-15 with thick pore wall and high hydrothermal stability. Mater Lett 145:312–31510.1016/j.matlet.2015.01.113 ↗
33. Peng K, Li X, Liu X, Wang Y (2017) Hydrothermally stable Nb-SBA-15 catalysts applied in carbohydrate conversion to 5-hydroxymethyl furfural. Mol Catal 441:72–8010.1016/j.mcat.2017.04.034 ↗
34. Talha Z, Bachir C, Ziri S, Bellahouel S, Bengueddach A, Villièras F, Pelletier M, Weidler PG, Hamacha R (2017) Al-Rich ordered mesoporous silica SBA-15 materials: synthesis, surface characterization and acid properties. Catal Lett 147:2116–212610.1007/s10562-017-2103-8 ↗
35. Arica TA, Ayas E, Yakup Arica M (2017) Magnetic MCM-41 silica particles grafted with poly(glycidylmethacrylate) brush: modification and application for removal of direct dyes. Microporous Mesoporous Mater 243:164–17510.1016/j.micromeso.2017.02.011 ↗
36. Kumar Mahto T, Chandra S, Haldar C, Kumar Sahu S (2015) Kinetic and thermodynamic study of polyaniline functionalized magnetic mesoporous silica for magnetic field guided dye adsorption. RSC Adv 5:47909–4791910.1039/C5RA08284F ↗
37. Gao Q, Zhu H, Luo WJ, Wang S, Zhou CG (2014) Preparation, characterization, and adsorption evaluation of chitosan-functionalized mesoporous composites. Microporous Mesoporous Mater 193:15–2610.1016/j.micromeso.2014.02.025 ↗
38. Mirzaie M, Rashidi A, Tayebi HA, Yazdanshenas ME (2017) Removal of anionic dye from aqueous media by adsorption onto SBA-15/polyamidoamine dendrimer hybrid: adsorption equilibrium and kinetics. J Chem Eng Data 62:1365–137610.1021/acs.jced.6b00917 ↗
39. Hadizade G, Binaeian E, Sarmasti Emami MR (2017) Preparation and characterization of hexagonal mesoporous silica/polyacrylamide nanocomposite capsule (PAM-HMS) for dye removal from aqueous solutions. J Mol Liq 238:499–50710.1016/j.molliq.2017.05.026 ↗
40. Sharma A, Dubey A (2017) Surface modified mesoporous silica polymer nanocomposites for adsorption of dyes from aqueous solution. J Porous Mater 24:429–43510.1007/s10934-016-0277-x ↗
41. Zhao D, Huo Q, Feng J, Chmelka BF, Stucky GD (1998) Nonionic triblock and star diblock copolymer and oligomeric surfactant syntheses of highly ordered, hydrothermally stable, mesoporous silica structures. J Am Chem Soc 120:6024–603610.1021/ja974025i ↗
42. Qi X, Hu X, Wei W, Yu H, Li J, Zhang J, Dong W (2015) Investigation of salecan/poly(vinyl alcohol) hydrogels prepared by freeze/thaw method. Carbohyd Polym 118:60–6910.1016/j.carbpol.2014.11.021 ↗
43. Wang LY, Wang MJ (2016) Removal of heavy metal ions by poly(vinyl alcohol) and carboxymethyl cellulose composite hydrogels prepared by a freeze–thaw method. ACS Sustain Chem Eng 4:2830–283710.1021/acssuschemeng.6b00336 ↗
44. Sing KSW, Everett DH, Haul RAW, Moscou L, Pierotti RA, Rouquerol J, Siemieniewska T (1985) Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure Appl Chem 57:603–61910.1351/pac198557040603 ↗
45. Abd El-Hafiz DR, Riad M, Mikhail S (2015) Nano-structured Mn–Al and Co–Al oxide materials for catalytic ethanol conversion. J Nanostruct Chem 5:393–40310.1007/s40097-015-0171-0 ↗
46. Parlayici S, Eskizeybek V, Avcı A, Pehlivan E (2015) Removal of chromium (VI) using activated carbon-supported-functionalized carbon nanotubes. J Nanostruct Chem 5:255–26310.1007/s40097-015-0156-z ↗
47. Li Y, Zhou K, He M, Yao J (2016) Synthesis of ZIF-8 and ZIF-67 using mixed-base and their dye adsorption. Microporous Mesoporous Mater 234:287–29210.1016/j.micromeso.2016.07.039 ↗
48. Wang S, Zhu ZH (2006) Characterisation and environmental application of an Australian natural zeolite for basic dye removal from aqueous solution. J Hazard Mater 136:946–95210.1016/j.jhazmat.2006.01.038 ↗
49. Wu T, Cai X, Tan S, Li H, Liu J, Yang W (2011) Adsorption characteristics of acrylonitrile, P-Toluenesulfonic acid, 1-naphthalenesulfonic acid and methyl blue on graphene in aqueous solutions. Chem Eng J 173:144–14910.1016/j.cej.2011.07.050 ↗
50. Yao Y, Xu F, Chen M, Xu Z, Zhu Z (2010) Adsorption behavior of methylene blue on carbon nanotubes. Biores Technol 101:3040–304610.1016/j.biortech.2009.12.042 ↗
51. Zhao M, Tang Z, Liu P (2008) Removal of methylene blue from aqueous solution with silica nano-sheets derived from vermiculite. J Hazard Mater 158:43–5110.1016/j.jhazmat.2008.01.031 ↗
52. Liu J, Hartono SB, Jin YG, Li Z, Lu GQM, Qiao SZ (2010) A facile vesicle template route to multi-shelled mesoporous silica hollow nanospheres. J Mater Chem 20:4595–460110.1039/b925201k ↗
53. Monash P, Pugazhenthi G (2010) Investigation of equilibrium and kinetic parameters of methylene blue adsorption onto MCM-41. Korean J Chem Eng 27:1184–119110.1007/s11814-010-0177-8 ↗
54. Lin LD, Lin Y, Li CJ, Wu DY, Kong HN (2016) Synthesis of zeolite/hydrous metal oxide composites from coal fly ash as efficient adsorbents for removal of methylene blue from water. Int J Miner Process 148:32–4010.1016/j.minpro.2016.01.010 ↗