Rejuvenation procedures to recover creep properties of nickel-base superalloys by heat treatment and hot isostatic pressing techniques
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. R. J. Hrubec andW. J. McCall,Turbomachinary Internat. 28 (5) (1987) 26.
2. M. McLean andM. S. Peck, “Cost 50 — Materials for Gas Turbines — UK 10; Comparison of Property Regeneration Techniques and Life Prediction Procedures Applied to Laboratory Tested and Service Exposed Ni-Cr Alloys”, NPL Report DMA (A) (1984) p. 91.
3. J. Wortmann,Mater. Sci. Tech. 1 (1985) 644.10.1179/mst.1985.1.8.644 ↗
4. W. B. Busch andJ. Wortman, in “High Temperature Alloys, Their Exploitable Potential”, edited by J. B. Marriott, M. Merz, J. Nihoul and J. Ward (Elsevier Applied Science, London, 1987) p. 377.
5. M. Lamberigts andCh. Lecomte-Mertens, in “High Temperature Alloys for Gas Turbines and Other Applications”, Proceedings of Conference, Liege, October 1986, Part I, edited by W. Betz, R. Brunetaud, D. Coutsouradis, H. Fischmeister, T. B. Gibbons, I. Kvernes, Y. Lindblom, J. B. Marriott and D. B. Meadowcroft (Reidel Publishing Co., 1986) p. 821.
6. J. W. Underhill, in Proceedings of Metal Society Conference on Refurbishing of Superalloy Components for Gas Turbines, London, May (1984) (Institute of Metals, London).
7. Idem., Mater. Sci. Tech. 1 (1985) 604.10.1179/mst.1985.1.8.604 ↗
8. T. B. Gibbons andB. E. Hopkins,Metal Sci. 18 (1984) 273.10.1179/030634584790420104 ↗
9. H. Burt, J. P. Dennison, I. C. Elliot andB. Wilshire,Mater. Sci. Engng 53 (1982) 245.10.1016/0025-5416(82)90057-X ↗
10. G. Jianting, D. Ranucci, E. Picco andP. M. Strocchi,Metall. Trans. 14A (1983) 2329.10.1007/BF02663308 ↗
11. R. A. Stevens andP. E. J. Flewitt,Mater. Sci. Engng 50 (1981) 271.10.1016/0025-5416(81)90186-5 ↗
12. G. S. Ansell andJ. Weertman,Trans. Met. Soc. AIME 215 (1959) 838.
13. D. McLean,Met. Rev. 7 (1962) 481.10.1179/095066062790207803 ↗
14. N. J. Grant, “The Strengthening of Metals”, edited by D. Pecker (Reinhold, New York, 1964) p. 163.
15. A. K. Koul andW. Wallace,Metall. Trans. 13A (1982) 673.10.1007/BF02644434 ↗
16. E. Nembach andG. Neite,Prog. Mater. Sci. 29 (1985) 177.10.1016/0079-6425(85)90001-5 ↗
17. W. C. Hagel andC. T. Sims, “Superalloys”, Vol. 1, 1st Edn (Wiley, New York, 1972) p. 114.
18. G. Guo, H. Shen andQ. Cai, in Proceedings of 4th International Conference on Mechanical Behaviour of Materials, Stockholm, August 1983, edited by J. Carlsson and N. G. Ohlson, Vol. 1, p. 231.
19. A. K. Koul andR. Thamburaj,Metall. Trans. 16A (1985) 17.10.1007/BF02656707 ↗
20. A. K. Koul andR. Castillo,ibid. 19A (1988) 2049.10.1007/BF02645208 ↗
21. A. K. Koul, LTR-ST-1284 (National Research Council Canada, Ottawa, 1981).
22. W. Betteridge andJ. Heslop, “The Nimonic Alloys”, 2nd Edn (Arnold, London, 1974) p. 63.
23. A. J. Perry,J. Mater. Sci. 9 (1974) 1016.10.1007/BF00570398 ↗
24. P. W. Davies, J. P. Dennison andD. Sidey,J. Int. Met. 101 (1973) 153.
25. G. R. Leverant andB. H. Kear,Metall. Trans. 1 (1971) 491.10.1007/BF02811560 ↗
26. B. E. Hopkins andT. B. Gibbons, in Proceedings of Conference on Creep Strength in Steels and High Temperature Alloys, London, September 1972 (Iron and Steel Institute, London, 1972) p. 165.
27. J. N. Greenwood,J. Iron Steel Inst. 171 (1952) 380.
28. Idem., ibid. 176 (1954) 268.
29. J. N. Greenwood, D. R. Miller andJ. W. Suiter,Acta Metall. 2 (1954) 250.10.1016/0001-6160(54)90166-2 ↗
30. R. W. Ballufi andL. L. Seigle,ibid. 5 (1957) 449.10.1016/0001-6160(57)90063-9 ↗
31. W. Pavinich andR. Raj,Metall. Trans. 8A (1977) 1917.10.1007/BF02646566 ↗
32. S. H. Goods andW. D. Nix,Acta Metall. 26 (1978) 753.10.1016/0001-6160(78)90025-1 ↗
33. E. P. George, in “Creep and Fracture of Engineering Materials and Fractures”, Proceedings of 3rd International Conference, Swansea, April 1987, edited by B. Wilshire and R. W. Evans (Institute of Metals, London) pp. 169–181.
34. J. Gittus, “Creep, Viscoelasticity and Creep Fracture in Solids” (Applied Science, London, 1975).
35. H. R. Tipler andB. E. Hopkins,Met. Sci. J. 10 (1976) 47.10.1179/030634576790432056 ↗
36. D. Lonsdale andP. E. J. Flewitt,Mater. Sci. Engng 41 (1979) 127.10.1016/0025-5416(79)90052-1 ↗
37. B. F. Dyson andD. McLean,Met. Sci. J. 6 (1972) 220.10.1179/030634572790446181 ↗
38. B. F. Dyson, M. J. Loveday andM. J. Rogers,Proc. R. Soc. A349 (1976) 245.10.1098/rspa.1976.0071 ↗
39. B. F. Dyson, unpublished work (1980).
40. B. J. Cane,Mater. Forum 9 (1986) 5.
41. P. W. Davies andR. W. Evans,Acta Metall. 13 (1965) 353.10.1016/0001-6160(65)90212-9 ↗
42. R. C. Gifkins, “Fracture” (Wiley, New York, 1959) p. 579.
43. P. W. Davies, J. P. Dennison andH. E. Evans,J. Inst. Met. 94 (1966) 270.
44. G. W. Greenwood, in Proceedings of 3rd International Conference on the Strength of Metals and Alloys, Cambridge, (1973) (Iron and Steel Institute, London) p. 218.
45. B. F. Dyson andD. McLean,Met. Sci. J. 11 (1977) 37.10.1179/msc.1977.11.2.37 ↗
46. B. J. Cane, in Proceedings of 3rd International Conference on the Mechanical Behaviour of Materials, Cambridge, U.K., August 1979, edited by K. J. Miller and R. F. Smith, Vol. 3 (Pergamon, Oxford, 1979) p. 213.
47. D. Lonsdale andP. E. J. Flewitt,Scripta Metall. 11 (1977) 1119.10.1016/0036-9748(77)90318-0 ↗
48. N. G. Needham andG. W. Greenwood,Met. Sci. J. 9 (1975) 258.10.1179/030634575790444621 ↗
49. B. Neubauer andU. Wedel, “Restlife Estimation of Creeping Components by Means of Replicas”, Advances in Life Prediction Methods (American Society of Mechanical Engineers, New York, 1983) pp. 307–314.
50. J. P. Dennison andB. Wilshire, in “Fracture 1977”, Vol. 2, Proceedings of ICF4, Waterloo, Canada, June (1977), edited by D. M. R. Taplin (University Waterloo Press, Canada) p. 635.
51. J. P. Dennison, P. D. Holmes andB. Wilshire,Mater. Sci. Engng 33 (1978) 35.10.1016/0025-5416(78)90151-9 ↗
52. A. S. Nemy andF. N. Rhines,Trans. TMS-AIME 215 (1959) 992.
53. J. P. Dennison andB. Wilshire,J. Inst. Metals 91 (1962) 343.
54. P. W. Davies andB. Wilshire, “Structural Processes in Creep”, Iron and Steel Institute Special Report (London, 1960) p. 34.
55. K. R. Williams andB. Wilshire,Mater. Sci. Engng 28 (1977) 289.10.1016/0025-5416(77)90183-5 ↗
56. P. W. Davies andJ. P. Dennison,Met. Sci. J. 9 (1975) 319.10.1179/030634575790444793 ↗
57. M. F. Ashby andB. F. Dyson, in Proceedings of 6th International Conference on Fracture (ICF6), New Delhi, India, December 1984, Vol. 1, edited by S. R. Valluri, D. M.R. Taplin, P. Rama Rao, J. F. Knott and R. Dubey (Pergamon, Exeter, 1986) p. 3.
58. F. A. Leckie andD. R. Hayhurst,Acta Metall. 25 (1977) 1059.10.1016/0001-6160(77)90135-3 ↗
59. R. W. Evans andB. Wilshire, in “Design of High Temperature Metallic Components”, edited by R. C. Hurst (Elsevier Applied Science, London, 1984) pp. 51–88.
60. H. E. Evans andJ. S. Waddington,J. Nucl. Mater. 30 (1969) 337.10.1016/0022-3115(69)90250-5 ↗
61. P. W. Davies, J. P. Dennison andH. E. Evans,J. Inst. Metals 95 (1967) 231.
62. G. K. Walker andH. E. Evans,Met. Sci. J. 4 (1970) 155.
63. R. A. Stevens andP. E. J. Flewitt,Acta Metall. 27 (1979) 67.10.1016/0001-6160(79)90057-9 ↗
64. Idem., Mater. Sci Engng 50 (1981) 271.10.1016/0025-5416(81)90186-5 ↗
65. R. W. Hart, andH. Gayter,J. Inst. Metals 96 (1968) 338.
66. R. A. Stevens andP. E. J. Flewitt,Mater. Engng 3 (1982) 461.
67. P. J. James, in “Hot Isostatic Technology”, edited by P. J. James (Applied Science, UK, 1983) pp. 231–237.
68. Yu. A. Rybakova andA. A. Yudin,Phys. Met. Metallog. 28 (4) (1969) 181.
69. D. C. Stewart, M. D. Ross andG. T. Bennett, AFML-TR-79-4039, Pratt and Whitney Aircraft Group, United Technologies Corporation, Box 2691, West Palm Beach, Florida 33402 (1979).
70. K. Friedl,Brown Boveri 53 (1966) 114.
71. A. K. Koul andW. Wallace, NAE ITR-ST-1235 (National Research Council Canada, Ottawa, 1981).
72. Idem., NAE LTR-ST-1242 (National Research Council Canada, Ottawa, 1981).
73. H. Burt, J. P. Dennison andB. Wilshire,Met. Sci. J. 13 (1979) 295.10.1179/msc.1979.13.5.295 ↗
74. G. R. Leverent andB. H. Kear,Metall. Trans. 1 (1970) 491.10.1007/BF02811560 ↗
75. W. Betteridge andA. W. Franklin,J. Inst. Metals 85 (1956–7) 473.
76. C. W. Weaver,ibid. 88 (1959–60) 296.
77. A. Gittins,Nature 214 (1967) 586.10.1038/214586a0 ↗
78. Idem., Acta Metall. 16 (1968) 517.10.1016/0001-6160(68)90126-0 ↗
79. S. R. Bell,Mater. Sci. Engng 1 (1985) 629.
80. R. Burgel, J. Ellner andK. Schneider,Diesel & Gas Turbine World-wide 20 (Sept. 1988) 34, 36, 40.
81. L. M. Wyatt,Mater. Sci. Engng 7 (1971) 237.10.1016/0025-5416(71)90064-4 ↗
82. D. Lonsdale andP. E. J. Flewitt,ibid. 32 (1978) 167.10.1016/0025-5416(78)90035-6 ↗
83. R. C. Boettner andW. D. Robertson,Trans. Metall. Soc. AIME 221 (1961) 613.
84. R. T. Ratcliffe andG. W. Greenwood,Phil. Mag. 12 (1965) 59.10.1080/14786436508224947 ↗
85. P. W. Davies,Jernkont. Annl. 155 (1971) 332.
86. D. Hull andD. E. Rimmer,Phil Mag. 10 (1959) 673.10.1080/14786435908243264 ↗
87. M. F. Ashby,Acta Metall. 22 (1974) 275.10.1016/0001-6160(74)90167-9 ↗
88. W. B. Beeré andG. W. Greenwood,Met. Sci. J. 5 (1971) 107.10.1179/030634571790439757 ↗
89. G. Van Drunen, J. Liburdi, W. Wallace andT. Terada, in Proceedings of AGARD-SMP Conference on Advanced Fabrication Processes, Florence, September 1978, AGARD-CP-256 (North Atlantic Treaty Organisation) pp. 13-1–13-12.
90. P. H. Floyd, W. Wallace andJ. P. Immarigeon, in Proceedings of International Conference on Heat Treatment, International Congress on Metals Engineering, Birmingham, UK, September 1981 (Metals Society, London, 1981). p. 97.
91. A. K. Koul, W. Wallace andR. Thamburaj, in Proceedings of AGARD-PEP Conference on Engine Cyclic Durability by Analysis and Testing, Liesse, The Netherlands, 1984, AGARD-CP-368, pp. 10-1–10-31.
92. A. K. Koul, J. P. Immarigeon, R. Castillo, P. Lowden andJ. Liburdi, in “Superalloys 1988”, Proceedings of Conference, Champion, Pennslyvania, September 1988, edited by D. N. Duhl, G. Maurer, S. Antolovich, C. Lund and S. Reichman (Metallurgical Society) p. 755.10.7449/1988/Superalloys_1988_755_764 ↗
93. P. Lowden andI. Liburdi, “Rejuvenation of Nimonic 80A Blades”, Liburdi Engineering Report No. 84-12-87B (1986).
94. R. T. Holt andW. Wallace,Int. Met. Rev. 203 (1976) 1.
95. A. K. Koul andD. Murphy,Microstruct. Sci. 11 (1982) 79.
96. A. K. Koul andG. H. Gessinger,Acta Metall. 31 (1983) 1016.
97. R. Castillo, A. K. Koul andI. P. Immarigeon, in “Superalloys 1988”, Proceedings of Conference, Champion, Pennsylvania, September 1988, edited by D. N. Duhl, G. Maurer, S. Antolovich, C. Lund and S. Reichman (Metallurgical Society, 1988) p. 805.10.7449/1988/Superalloys_1988_805_814 ↗
98. J. Brett andL. L. Seigle,Acta Metall. 14 (1963) 467.10.1016/0001-6160(63)90173-1 ↗
99. K. H. Westamacott, R. E. Smallman andP. Dobson,Met. Sci. J. 2 (1968) 177.10.1179/030634568790443530 ↗
100. T. E. Volin andR. W. Ballufi,Phys. Status Solidi 25 (1968) 163.10.1002/pssb.19680250116 ↗