journal article·2012-04Open access

Coarsening of equiaxed microstructure in the semisolid state of aluminum 7075 alloy through SIMA processing

Amir Bolouri, Mohammad Shahmiri, Chung Gil Kang

Journal of Materials Science· Volume 47· Issue 8

Abstract

In the present study, the coarsening mechanism of equiaxed grains in the semisolid state of aluminum 7075 alloy, treated via strain induced melting activation process, was investigated. The kinetics of equiaxed grain growth in the semisolid state of the experimental alloy was determined. The results revealed that when the holding temperature increased, the coarsening rate constant (K) showed a precipitously increasing character in the range of 590–610 °C. This was attributed to the extensive effect of the coalescence mechanism on the grain growth at the high solid fractions. By further increasing the holding temperature to 620 and 625 °C (increasing the liquid fraction), the effect of coalescence on the grain growth appeared to be weakened, that is, although there was a slight decrease at 620 °C, a gently increasing character could be generally supposed. Severe segregation of Zn and Cu alloying elements at grain boundaries and intragranular droplets was detected at 620 and 625 °C after 15 and 10 min, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Spencer DB (1971) Dissertation, Massachusetts Institute of Technology, Cambridge
2. Spencer DB, Mehrabian R, Flemings MC (1972) Metall Mater Trans B 3:192510.1007/BF02642580 ↗
3. Kapranos P, Ward PJ, Atkinson HV, Kirkwood DH (2000) Mater Des 21:38710.1016/S0261-3069(99)00077-1 ↗
4. Flemings MC (1991) Metall Mater Trans A 22:26910.1007/BF02651227 ↗
5. Kirkwood DH (1994) Int Mater Rev 39:17310.1179/095066094790150946 ↗
6. Fan Z (2002) Int Mater Rev 47:4910.1179/095066001225001076 ↗
7. Atkinson HV (2005) Prog Mater Sci 50:34110.1016/j.pmatsci.2004.04.003 ↗
8. Atkinson HV, Liu D (2008) Mater Sci Eng A496:43910.1016/j.msea.2008.06.013 ↗
9. Omar MZ, Alfan A, Syarif J, Atkinson HV (2011) J Mater Sci. doi: 10.1007/s10853-011-5749-410.1007/s10853-011-5749-4 ↗
10. Zoqui EJ, Naldi MA (2011) J Mater Sci. doi: 10.1007/s10853-011-5730-210.1007/s10853-011-5730-2 ↗
11. Ji S, Fan Z, Bevis MJ (2001) Mater Sci Eng A 229:21010.1016/S0921-5093(00)01373-3 ↗
12. Mehrabian R, Flemings MC (1972) AFS Trans 80:173
13. Young KP, Kyonka CP, Courtois F (1983) Fine grained metal composition. United States Patent No. 4415374
14. Kirkwood DH, Sellars CM, Elias-Boyed LG (1992) Thixotropic materials. European Patent No. 0305375 B1
15. Atkinson HV, Burke K, Vaneetveld G (2008) Mater Sci Eng A 490:26610.1016/j.msea.2008.01.057 ↗
16. Chayong S, Atkinson HV, Kapranos P (2005) Mater Sci Eng A 390:310.1016/j.msea.2004.05.004 ↗
17. Chayong S, Atkinson HV, Kapranos P (2004) Mater Sci Technol 20:49010.1179/026708304225012341 ↗
18. Vaneetveld G, Rassili A, Pierret JC (2008) Solid State Phenom 141–143:70710.4028/www.scientific.net/SSP.141-143.707 ↗
19. Vaneetveld G, Rassili A, Pierret J-C, Lecomte-Beckers J (2008) Int J Mater Form 1:101910.1007/s12289-008-0231-9 ↗
20. Bolouri Amir, Shahmiri Mohammad, Kang CG (2011) J Alloy Compd 509:40210.1016/j.jallcom.2010.09.042 ↗
21. Tzimas Evangelos, Zavaliangos Antonios (2000) Mater Sci Eng A 289:22810.1016/S0921-5093(00)00908-4 ↗
22. Kaysser WA, Takajo S, Petzow G (1984) Acta Mater 32:11510.1016/0001-6160(84)90208-6 ↗
23. Wolfsdrof TL, Bender WH, Voorhees PW (1997) Acta Mater 45:227910.1016/S1359-6454(96)00338-2 ↗
24. German RM (1996) Sintering theory and practice. Wiley, New York
25. Wolfsdorf TL, Bender WH, Voorhees PW (1997) Acta Mater 49:227910.1016/S1359-6454(96)00338-2 ↗
26. Annavarapu S, Doherty RD (1995) Acta Metall Mater 43:320710.1016/0956-7151(94)00448-Q ↗
27. Liu D, Atkinson HV, Kapranos P, Jones H (2004) J Mater Sci 39:99. doi: 10.1023/B:JMSC.0000007732.04363.8110.1023/B:JMSC.0000007732.04363.81 ↗
28. Cerri E, Evangelista E, Spigarelli S (2000) Mater Sci Eng A 284:25410.1016/S0921-5093(00)00748-6 ↗
29. Cavaliere P, Cerri E, Leo P (2004) J Mater Sci 39:1653. doi: 10.1023/B:JMSC.0000016165.99666.dd10.1023/B:JMSC.0000016165.99666.dd ↗
30. Kleiner S, Beffort O, Uggowitzer PJ (2004) Scripta Mater 51:40510.1016/j.scriptamat.2004.05.010 ↗
31. Yu YB, Song PY, Kim SS (1999) Scripta Mater 41:76710.1016/S1359-6462(99)00215-8 ↗
32. Cahn RW, Haasen P (1996) Physical Metallurgy, 4th edn. Elsevier, Amsterdam
33. Christian JW (1975) The theory of transformations in metals and alloys, 2nd edn. Pergamon Press, Oxford
34. Humphreys FJ, Hatherly M (1995) Recrystallization and related annealing phenomena. Pergamon Press, Oxford
35. Manson-Whitton ED, Stone IC, Jones JR, Grant PS, Cantor B (2002) Acta Mater 50:251710.1016/S1359-6454(02)00080-0 ↗
36. Hardy SC, Voorhees PW (1988) Metall Trans A 19:271310.1007/BF02645806 ↗
37. Kim Hee-Soo, Stone IanC, Cantor Brian (2008) J Mater Sci 43:1292. doi: 10.1007/s10853-007-2151-310.1007/s10853-007-2151-3 ↗
38. Mohammadi H, Ketabchi M, Kalaki A (2010) J Mater Eng Perform. doi: 10.1007/s11665-010-9762-610.1007/s11665-010-9762-6 ↗