A highly active bio-based epoxy resin with multi-functional group: synthesis, characterization, curing and properties
Source abstract
Abstract
A bio-based epoxy resin, triglycidyl ether of resveratrol (TGER), was synthesized based on the renewable resveratrol deriving from tannins. The structure and properties of TGER have been characterized by 1H NMR, 13C NMR, FTIR, GPC and viscosity measurement. Besides, systematical investigation was carried out on the curing reaction of TGER and diaminodiphenylmethane (DDM), assisted by the characterization of mechanical properties and thermal properties of cured TGER/DDM by means of differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis (DMA), flexural and impact measurement. Non-isothermal and isothermal curing analysis showed that TGER/DDM system, deriving from autocatalytic curing reaction, possessed 40 °C lower curing temperature (84 °C) than bisphenol A diglycidyl ether (DGEBA) (124 °C) and much lower activation energy than DGEBA/DDM system calculated by Kissinger equation. DMA revealed that TGER possessed high glass transition temperature (T g = 148 °C) and glassy storage modulus (2.391 GPa@23 °C). Meanwhile, TGER/DDM thermosets also exhibited good mechanical properties and heat resistance, illustrating that multi-phenol group and stilbene group of resveratrol endowed polymer with high cross-linking density and rigidness. Therefore, TGER could be a promising alternative to petroleum-based epoxy resin.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Polymer composites and self-healing · Lignin and Wood Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Moore CJ (2008) Synthetic polymers in the marine environment: a rapidly increasing, long-term threat. Environ Res 108:131–139. https://doi.org/10.1016/j.envres.2008.07.02510.1016/j.envres.2008.07.025 ↗
2. Auvergne R, Caillol S, David G, Boutevin B, Pascault JP (2014) Biobased thermosetting epoxy: present and future. Chem Rev 114:1082–1115. https://doi.org/10.1021/cr300127410.1021/cr3001274 ↗
3. Baroncini EA, Yadav SK, Palmese GR, Iii JFS (2016) Recent advances in bio-based epoxy resins and bio-based epoxy curing agents. J Appl Polym Sci 133:44103. https://doi.org/10.1002/app.4410310.1002/app.44103 ↗
4. Sasaki S, Ooya T, Takeuchi T (2010) Highly selective bisphenol A—imprinted polymers prepared by atom transfer radical polymerization†. Polym Chem 1:1684–1688. https://doi.org/10.1039/c0py00140f10.1039/c0py00140f ↗
5. vom Saal FS, Hughes C (2005) Bisphenol A and risk assessment. Environ Health Perspect 113:926–933. https://doi.org/10.1289/ehp.771310.1289/ehp.7713 ↗
6. Mathers RT (2012) How well can renewable resources mimic commodity monomers and polymers? J Polym Sci Part A Polym Chem 50:1–15. https://doi.org/10.1002/pola.2493910.1002/pola.24939 ↗
7. Kumar S, Samal SK, Mohanty S, Nayak SK (2016) Recent development of bio-based epoxy resins: a review. Polym Plast Technol Eng. https://doi.org/10.1080/03602559.2016.125374210.1080/03602559.2016.1253742 ↗
8. Bell BM, Briggs JR, Campbell RM (2008) Glycerin as a renewable feedstock for epichlorohydrin production. The GTE process. CLEAN Soil Air Water 36:657–661. https://doi.org/10.1002/clen.20080006710.1002/clen.200800067 ↗
9. Lacerda TM, Gandini A (2014) Marriage of furans and vegetable oils through click chemistry for the preparation of macromolecular materials: a succinct review. J Renew Mater 2:2–12. https://doi.org/10.7569/jrm.2013.63412710.7569/jrm.2013.634127 ↗
10. Santacesaria E, Tesser R, Di Serio M, Turco R, Russo V, Verde D (2011) A biphasic model describing soybean oil epoxidation with H2O2 in a fed-batch reactor. Chem Eng J 173:198–209. https://doi.org/10.1016/j.cej.2011.05.01810.1016/j.cej.2011.05.018 ↗
11. Campanella A, Fontanini C, Baltanás MA (2008) High yield epoxidation of fatty acid methyl esters with performic acid generated in situ. Chem Eng J 144:466–475. https://doi.org/10.1016/j.cej.2008.07.01610.1016/j.cej.2008.07.016 ↗
12. Fourcade D, Ritter BS, Walter P, Schönfeld R, Mülhaupt R (2013) Renewable resource-based epoxy resins derived from multifunctional poly(4-hydroxybenzoates). Green Chem 15:910–918. https://doi.org/10.1039/c3gc37088g10.1039/c3gc37088g ↗
13. Elchinger P-H, Montplaisir D, Zerrouki R (2012) Starch–cellulose crosslinking—towards a new material. Carbohyd Polym 87:1886–1890. https://doi.org/10.1016/j.carbpol.2011.09.02710.1016/j.carbpol.2011.09.027 ↗
14. Aron PM, Kennedy JA (2008) Flavan-3-ols: nature, occurrence and biological activity. Mol Nutr Food Res 52:79–104. https://doi.org/10.1002/mnfr.20070013710.1002/mnfr.200700137 ↗
15. Guigo N, Mija A, Vincent L, Sbirrazzuoli N (2010) Eco-friendly composite resins based on renewable biomass resources: polyfurfuryl alcohol/lignin thermosets. Eur Polym J 46:1016. https://doi.org/10.1016/j.eurpolymj.2010.02.01010.1016/j.eurpolymj.2010.02.010 ↗
16. Hernandez ED, Bassett AW, Sadler JM, La Scala JJ, Stanzione JF (2016) Synthesis and characterization of bio-based epoxy resins derived from vanillyl alcohol. ACS Sustain Chem Eng 4:4328–4339. https://doi.org/10.1021/acssuschemeng.6b0083510.1021/acssuschemeng.6b00835 ↗
17. Hu F, La Scala JJ, Sadler JM, Palmese GR (2014) Synthesis and characterization of thermosetting furan-based epoxy systems. Macromolecules 47:3332–3342. https://doi.org/10.1021/ma500687t10.1021/ma500687t ↗
18. Maiorana A, Reano FA, Centore R et al (2016) Structure property relationships of biobased n-alkyl bisferulate epoxy resins. Green Chem 18:4961–4973. https://doi.org/10.1039/C6GC01308B10.1039/C6GC01308B ↗
19. Wan J, Gan B, Li C et al (2016) A sustainable, eugenol-derived epoxy resin with high biobased content, modulus, hardness and low flammability: Synthesis, curing kinetics and structure–property relationship. Chem Eng J 284:1080–1093. https://doi.org/10.1016/j.cej.2015.09.03110.1016/j.cej.2015.09.031 ↗
20. Tüzün A, Lligadas G, Ronda JC, Galià M, Cádiz V (2015) Integrating plant oils into thermally curable main-chain benzoxazine polymers via ADMET polymerization. Eur Polym J 67:503–512. https://doi.org/10.1016/j.eurpolymj.2014.12.02310.1016/j.eurpolymj.2014.12.023 ↗
21. Chrysanthos M, Galy J, Pascault J-P (2011) Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl ether. Polymer 52:3611–3620. https://doi.org/10.1016/j.polymer.2011.06.00110.1016/j.polymer.2011.06.001 ↗
22. Lukaszczyk J, Janicki B, Frick A (2012) Investigation on synthesis and properties of isosorbide based bis-GMA analogue. J Mater Sci Mater Med 23:1149–1155. https://doi.org/10.1007/s10856-012-4594-610.1007/s10856-012-4594-6 ↗
23. Łukaszczyk J, Janicki B, Kaczmarek M (2011) Synthesis and properties of isosorbide based epoxy resin. Eur Polym J 47:1601–1606. https://doi.org/10.1016/j.eurpolymj.2011.05.00910.1016/j.eurpolymj.2011.05.009 ↗
24. Wan J, Gan B, Li C et al (2015) A novel biobased epoxy resin with high mechanical stiffness and low flammability: synthesis, characterization and properties. J Mater Chem A 3:21907–21921. https://doi.org/10.1039/c5ta02939b10.1039/c5ta02939b ↗
25. Liu X, Xin W, Zhang J (2009) Rosin-based acid anhydrides as alternatives to petrochemical curing agents. Green Chem 11:1018. https://doi.org/10.1039/b903955d10.1039/b903955d ↗
26. Liu X, Xin W, Zhang J (2010) Rosin-derived imide-diacids as epoxy curing agents for enhanced performance. Biores Technol 101:2520–2524. https://doi.org/10.1016/j.biortech.2009.11.02810.1016/j.biortech.2009.11.028 ↗
27. Wang H, Liu X, Liu B, Zhang J, Xian M (2009) Synthesis of rosin-based flexible anhydride-type curing agents and properties of the cured epoxy. Polym Int 58:1435–1441. https://doi.org/10.1002/pi.268010.1002/pi.2680 ↗
28. Qin J, Liu H, Zhang P, Wolcott M, Zhang J (2014) Use of eugenol and rosin as feedstocks for biobased epoxy resins and study of curing and performance properties. Polym Int 63:760–765. https://doi.org/10.1002/pi.458810.1002/pi.4588 ↗
29. Erdogan CS, Vang O (2016) Challenges in analyzing the biological effects of resveratrol. Nutrients. https://doi.org/10.3390/nu806035310.3390/nu8060353 ↗
30. Burns J, Yokota T, Ashihara H, Lean ME, Crozier A (2002) Plant foods and herbal sources of resveratrol. J Agric Food Chem 50:3337–3340. https://doi.org/10.1021/jf011297310.1021/jf0112973 ↗
31. Cash JJ, Davis MC, Ford MD et al (2013) High Tg thermosetting resins from resveratrol. Polym Chem 4:3859–3865. https://doi.org/10.1039/c3py00438d10.1039/c3py00438d ↗
32. McAninch IM, Palmese GR, Lenhart JL, La Scala JJ (2015) DMA testing of epoxy resins: The importance of dimensions. Polym Eng Sci 55:2761–2774. https://doi.org/10.1002/pen.2416710.1002/pen.24167 ↗
33. Mc Aninch IM, Palmese GR, Lenhart JL, La Scala JJ (2015) Epoxy–amine networks with varying epoxy polydispersity. J Appl Polym Sci. https://doi.org/10.1002/app.4150310.1002/app.41503 ↗
34. Forshaw S, Matthews AJ, Brown TJ, Diorazio LJ, Williams L, Wills M (2017) Asymmetric transfer hydrogenation of 1,3-alkoxy/aryloxy propanones using tethered Arene/Ru (II)/TsDPEN complexes. Org Lett 19:2789–2792. https://doi.org/10.1021/acs.orglett.7b0075610.1021/acs.orglett.7b00756 ↗
35. Tian N, Gong J, Wen X, Yao K, Tang T (2014) Synthesis and characterization of a novel organophosphorus oligomer and its application in improving flame retardancy of epoxy resin. RSC Advances 4:17607–17614. https://doi.org/10.1039/c4ra01525h10.1039/c4ra01525h ↗
36. Francis B, Thomas S, Jose J, Ramaswamy R, Lakshmana Rao V (2005) Hydroxyl terminated poly(ether ether ketone) with pendent methyl group toughened epoxy resin: miscibility, morphology and mechanical properties. Polymer 46:12372–12385. https://doi.org/10.1016/j.polymer.2005.10.10310.1016/j.polymer.2005.10.103 ↗
37. Liu J, Tang J, Wang X, Wu D (2012) Synthesis, characterization and curing properties of a novel cyclolinear phosphazene-based epoxy resin for halogen-free flame retardancy and high performance. RSC Adv 2:5789–5799. https://doi.org/10.1039/c2ra20739g10.1039/c2ra20739g ↗
38. Afzal A, Siddiqi HM (2011) A comprehensive study of the bicontinuous epoxy–silica hybrid polymers: I. Synthesis, characterization and glass transition. Polymer 52:1345–1355. https://doi.org/10.1016/j.polymer.2011.01.04610.1016/j.polymer.2011.01.046 ↗
39. Wang X, Gillham JK (1992) Analysis of crosslinking in amine-cured epoxy systems: the one-to-one relationship between Tg and conversion. J Appl Polym Sci 45:2127–2143. https://doi.org/10.1002/app.1992.07045120910.1002/app.1992.070451209 ↗
40. Wang H, Zhang Y, Zhu L, Du Z, Zhang B, Zhang Y (2011) Curing behaviors and kinetics of epoxy resins with a series of biphenyl curing agents having different methylene units. Thermochim Acta 521:18–25. https://doi.org/10.1016/j.tca.2011.03.03610.1016/j.tca.2011.03.036 ↗
41. Vyazovkin S, Burnham AK, Criado JM, Pérez-Maqueda LA, Popescu C, Sbirrazzuoli N (2011) ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta 520:1–19. https://doi.org/10.1016/j.tca.2011.03.03410.1016/j.tca.2011.03.034 ↗
42. Vyazovkin S, Wight CA (1999) Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data. Thermochim Acta 340–341:53–68. https://doi.org/10.1016/S0040-6031(99)00253-110.1016/S0040-6031(99)00253-1 ↗
43. Kamal MR (1974) Thermoset characterization for moldability analysis. Polym Eng Sci 14:231–239. https://doi.org/10.1002/pen.76014031210.1002/pen.760140312 ↗
44. Wan J, Bu Z-Y, Xu C-J, Li B-G, Fan H (2011) Preparation, curing kinetics, and properties of a novel low-volatile starlike aliphatic–polyamine curing agent for epoxy resins. Chem Eng J 171:357–367. https://doi.org/10.1016/j.cej.2011.04.00410.1016/j.cej.2011.04.004 ↗
45. Wan J, Li C, Bu Z-Y, Xu C-J, Li B-G, Fan H (2012) A comparative study of epoxy resin cured with a linear diamine and a branched polyamine. Chem Eng J 188:160–172. https://doi.org/10.1016/j.cej.2012.01.13410.1016/j.cej.2012.01.134 ↗
46. Liu YL, Wang YH (2004) Preparation and properties of novel benzoxazine and polybenzoxazine with maleimide groups. J Polym Sci Part A Polym Chem 42:5954–5963. https://doi.org/10.1002/pola.2016210.1002/pola.20162 ↗
47. Ma S, Liu X, Jiang Y, Tang Z, Zhang C, Zhu J (2013) Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers. Green Chem 15:245–254. https://doi.org/10.1039/c2gc36715g10.1039/c2gc36715g ↗