Electrospinning and electrospraying techniques for designing novel antibacterial poly(3-hydroxybutyrate)/zinc oxide nanofibrous composites
Source abstract
Abstract
This investigation concerns the design of poly(3-hydroxybutyrate) (PHB)-based nanofibrous hybrid materials containing zinc oxide nanoparticles (nano-ZnO) by means of two electro-hydrodynamic techniques, i.e., electrospinning of polymer/nano-ZnO solutions and the combination of electrospinning of polymer solutions with electrospraying of nano-ZnO dispersions. The analysis of the physical properties associated with precursory solutions was performed in order to understand the final morphology of the corresponding nanofibers. The obtained PHB/nano-ZnO mats showed uniform fiber morphology with an average porosity ca. 85 % with enhanced thermal stability compared to that of pristine PHB. Differential scanning calorimetry was also used to determine the influence of ZnO nanoparticles in the phase transitions of as-spun PHB nanofibers. Furthermore, the antibacterial performance against E. coli and S. aureus proved to be dependent on the elaboration technique, thus permitting the design of novel bacteriostatic or bactericidal PHB/nano-ZnO nanofibrous composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · biodegradable polymer synthesis and properties · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Ramier J, Bouderlique T, Stoilova O, Manolova N, Rashkov I, Langlois V, Renard E, Albanese P, Grande D (2014) Biocomposite scaffolds based on electrospun poly(3-hydroxybutyrate) nanofibers and electrosprayed hydroxyapatite nanoparticles for bone tissue engineering applications. Mater Sci Eng C 38:161–169. doi: 10.1016/j.msec.2014.01.04610.1016/j.msec.2014.01.046 ↗
2. Ramier J, Grande D, Bouderlique T, Stoilova O, Manolova N, Rashkov I, Langlois V, Albanese P, Renard E (2014) From design of bio-based biocomposite electrospun scaffolds to osteogenic differentiation of human mesenchymal stromal cells. J Mater Sci Mater Med 25(6):1563–1575. doi: 10.1007/s10856-014-5174-810.1007/s10856-014-5174-8 ↗
3. Sill TJ, von Recum HA (2008) Electrospinning: applications in drug delivery and tissue engineering. Biomaterials 29(13):1989–2006. doi: 10.1016/j.biomaterials.2008.01.01110.1016/j.biomaterials.2008.01.011 ↗
4. Villarreal-Gómez LJ, Cornejo-Bravo JM, Vera-Graziano R, Grande D (2016) Electrospinning as a powerful technique for biomedical applications: a critically selected survey. J Biomater Sci Polym Ed 27(2):157–176. doi: 10.1080/09205063.2015.111688510.1080/09205063.2015.1116885 ↗
5. Speranza G, Gottardi G, Pederzolli C, Lunelli L, Canteri R, Pasquardini L, Carli E, Lui A, Maniglio D, Brugnara M, Anderle M (2004) Role of chemical interactions in bacterial adhesion to polymers surfaces. Biomaterials 25(11):2029–2037. doi: 10.1016/j.biomaterials.2003.08.06110.1016/j.biomaterials.2003.08.061 ↗
6. Pavithra D, Doble M (2008) Biofilm formation, bacterial adhesion and host response on polymeric implants: issues and prevention. Biomed Mater 3(3):034003. doi: 10.1088/1748-6041/3/3/03400310.1088/1748-6041/3/3/034003 ↗
7. Armentano I, Arciola CR, Fortunati E, Ferrari D, Mattioli S, Amoroso CF (2014) The interaction of bacteria with engineered nanostructured polymeric materials: a review. Sci World J 2014:410423. doi: 10.1155/2014/41042310.1155/2014/410423 ↗
8. Abrigo M, McArthur SL, Kingshott P (2014) Electrospun nanofibers as dressings for chronic wound care: advances, challenges, and future prospects. Macromol Biosci 14(6):772–792. doi: 10.1002/mabi.2013005610.1002/mabi.20130056 ↗
9. Augustine R, Malik HN, Singhal DK, Mukherjee A, Malakar D, Kalarikkal N, Thomas S (2014) Electrospun polycaprolactone/ZnO nanocomposite membranes as biomaterials with antibacterial and cell adhesion properties. J Polym Res 21(3):1–17. doi: 10.1007/s10965-013-0347-610.1007/s10965-013-0347-6 ↗
10. Kumar PT, Lakshmanan VK, Anilkumar TV, Ramya C, Reshmi P, Unnikrishnan AG, Nair SV, Jayakumar R (2012) Flexible and microporous chitosan hydrogel/nano ZnO composite bandages for wound dressing: in vitro and in vivo evaluation. ACS Appl Mater Interfaces 4(5):2618–2629. doi: 10.1021/am300292v10.1021/am300292v ↗
11. Mahapatra A, Garg N, Nayak BP, Mishra BG, Hota G (2012) Studies on the synthesis of electrospun PAN-Ag composite nanofibers for antibacterial application. J Appl Polym Sci 124(2):1178–1185. doi: 10.1002/app.3507610.1002/app.35076 ↗
12. Rodríguez-Tobías H, Morales G, Ledezma A, Romero J, Grande D (2014) Novel antibacterial electrospun mats based on poly(d, l-lactide) nanofibers and zinc oxide nanoparticles. J Mater Sci 49(24):8373–8385. doi: 10.1007/s10853-014-8547-y10.1007/s10853-014-8547-y ↗
13. Francis L, Venugopal J, Prabhakaran MP, Thavasi V, Marsano E, Ramakrishna S (2010) Simultaneous electrospin-electrosprayed biocomposite nanofibrous scaffolds for bone tissue regeneration. Acta Biomater 6(10):4100–4109. doi: 10.1016/j.actbio.2010.05.00110.1016/j.actbio.2010.05.001 ↗
14. Korina E, Stoilova O, Manolova N, Rashkov I (2014) Poly(3-hydroxybutyrate)-based hybrid materials with photocatalytic and magnetic properties prepared by electrospinning and electrospraying. J Mater Sci 49(5):2144–2153. doi: 10.1007/s10853-013-7907-310.1007/s10853-013-7907-3 ↗
15. Mangeon C, Mahouche-Chergui S, Versace DL, Guerrouache M, Carbonnier B, Langlois V, Renard E (2015) Poly(3-hydroxyalkanoate)-grafted carbon nanotube nanofillers as reinforcing agent for PHAs-based electrospun mats. React Funct Polym 89:18–23. doi: 10.1016/j.reactfunctpolym.2015.03.00110.1016/j.reactfunctpolym.2015.03.001 ↗
16. Talebian N, Amininezhad SM, Doubi M (2013) Controllable synthesis of ZnO nanoparticles and their morphology-dependent antibacterial and optical properties. J Photochem Photobiol C 120:66–73. doi: 10.1016/j.jphotobiol.2013.01.00410.1016/j.jphotobiol.2013.01.004 ↗
17. Wahab R, Mishra A, Yun SI, Kim YS, Shin HS (2010) Antibacterial activity of ZnO nanoparticles prepared via non-hydrolytic solution route. Appl Microbiol Biotechnol 87(5):1917–1925. doi: 10.1007/s00253-010-2692-210.1007/s00253-010-2692-2 ↗
18. Tayel AA, El-Tras WF, Moussa S, El-Baz AF, Mahrous H, Salem MF, Brimer L (2011) Antibacterial action of zinc oxide nanoparticles against foodborne pathogens. J Food Saf 31(2):211–218. doi: 10.1111/j.1745-4565.2010.00287.x10.1111/j.1745-4565.2010.00287.x ↗
19. Premanathan M, Karthikeyan K, Jeyasubramanian K, Manivannan G (2011) Selective toxicity of ZnO nanoparticles toward Gram-positive bacteria and cancer cells by apoptosis through lipid peroxidation. Nanomedicine 7(2):184–192. doi: 10.1016/j.nano.2010.10.00110.1016/j.nano.2010.10.001 ↗
20. Barreto GP, Morales G, Quintanilla MLL (2013) Microwave assisted synthesis of ZnO nanoparticles: effect of precursor reagents, temperature, irradiation time and additives on nano-ZnO morphology development. J Mater ID 47868110.1155/2013/478681 ↗
21. Augustine R, Dominic EA, Reju I, Kaimal B, Kalarikkal N, Thomas S (2014) Electrospun polycaprolactone membranes incorporated with ZnO nanoparticles as skin substitutes with enhanced fibroblast proliferation and wound healing. RSC Adv 4(47):24777. doi: 10.1039/c4ra02450h10.1039/c4ra02450h ↗
22. Shalumon KT, Anulekha KH, Nair SV, Chennazhi KP, Jayakumar R (2011) Sodium alginate/poly(vinyl alcohol)/nano ZnO composite nanofibers for antibacterial wound dressings. Int J Biol Macromol 49(3):247–254. doi: 10.1016/j.ijbiomac.2011.04.00510.1016/j.ijbiomac.2011.04.005 ↗
23. Wang Y, Zhang Q, C-l Zhang, Li P (2012) Characterisation and cooperative antimicrobial properties of chitosan/nano-ZnO composite nanofibrous membranes. Food Chem 132(1):419–427. doi: 10.1016/j.foodchem.2011.11.01510.1016/j.foodchem.2011.11.015 ↗
24. Burks T, Akthar F, Saleemi M, Avila M, Kiros Y (2015) ZnO-PLLA nanofiber nanocomposite for continuous flow mode purification of water from Cr(VI). J Environ Public Health 2015:1–7. doi: 10.1155/2015/68709410.1155/2015/687094 ↗
25. Kayaci F, Ozgit-Akgun C, Donmez I, Biyikli N, Uyar T (2012) Polymer-inorganic core-shell nanofibers by electrospinning and atomic layer deposition: flexible nylon-ZnO core-shell nanofiber mats and their photocatalytic activity. ACS Appl Mater Interfaces 4(11):6185–6194. doi: 10.1021/am301797610.1021/am3017976 ↗
26. Virovska D, Paneva D, Manolova N, Rashkov I, Karashanova D (2014) Electrospinning/electrospraying vs. electrospinning: a comparative study on the design of poly(l-lactide)/zinc oxide non-woven textile. Appl Surf Sci 311:842–850. doi: 10.1016/j.apsusc.2014.05.19210.1016/j.apsusc.2014.05.192 ↗
27. Jendrossek D, Handrick R (2002) Microbial degradation of polyhydroxyalkanoates. Annu Rev Microbiol 56:403–432. doi: 10.1146/annurev.micro.56.012302.16083810.1146/annurev.micro.56.012302.160838 ↗
28. Suwantong O, Waleetorncheepsawat S, Sanchavanakit N, Pavasant P, Cheepsunthorn P, Bunaprasert T, Supaphol P (2007) In vitro biocompatibility of electrospun poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fiber mats. Int J Biol Macromol 40(3):217–223. doi: 10.1016/j.ijbiomac.2006.07.00610.1016/j.ijbiomac.2006.07.006 ↗
29. Diez-Pascual AM, Diez-Vicente AL (2014) Poly(3-hydroxybutyrate)/ZnO bionanocomposites with improved mechanical, barrier and antibacterial properties. Int J Mol Sci 15(6):10950–10973. doi: 10.3390/ijms15061095010.3390/ijms150610950 ↗
30. P-o Rujitanaroj, Pimpha N, Supaphol P (2008) Wound-dressing materials with antibacterial activity from electrospun gelatin fiber mats containing silver nanoparticles. Polymer 49(21):4723–4732. doi: 10.1016/j.polymer.2008.08.02110.1016/j.polymer.2008.08.021 ↗
31. Zahedi P, Rezaeian I, Ranaei-Siadat S-O, Jafari S-H, Supaphol P (2009) A review on wound dressings with an emphasis on electrospun nanofibrous polymeric bandages. Polym Adv Technol 21(2):77–95. doi: 10.1002/pat.162510.1002/pat.1625 ↗
32. Sen CK (2009) Wound healing essentials: let there be oxygen. Wound Repair Regen 17(1):1–18. doi: 10.1111/j.1524-475X.2008.00436.x10.1111/j.1524-475X.2008.00436.x ↗
33. Rainer A, Centola M, Spadaccio C, Gherardi G, Genovese JA, Licoccia S, Trombetta M (2010) Comparative study of different techniques for the sterilization of poly-L-lactide electrospun microfibers: effectiveness vs. material degradation. Int J Artif Organs 33(2):76–8510.1177/039139881003300203 ↗
34. Janorkar AV, Metters AT, Hirt DE (2007) Degradation of poly(L-lactide) films under ultraviolet-induced photografting and sterilization conditions. J Appl Polym Sci 106(2):1042–1047. doi: 10.1002/app.2469210.1002/app.24692 ↗
35. Yu W, Lan C-H, Wang S-J, Fang P-F, Sun Y-M (2010) Influence of zinc oxide nanoparticles on the crystallization behavior of electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate) nanofibers. Polymer 51(11):2403–2409. doi: 10.1016/j.polymer.2010.03.02410.1016/j.polymer.2010.03.024 ↗
36. Zhou S, Zheng X, Yu X, Wang J, Weng J, Li X, Feng B, Yin M (2007) Hydrogen bonding interaction of poly(D, L-lactide)/hydroxyapatite nanocomposites. Chem Mater 19(2):247–25310.1021/cm0619398 ↗
37. Brayner R, Ferrari-Iliou R, Brivois N, Djediat S, Benedetti MF, Fiévet F (2006) Toxicological impact studies based on E. coli bacteria in ultrafine ZnO nanoparticles colloidal medium. Nano Lett 6(4):866–870. doi: 10.1021/nl052326h10.1021/nl052326h ↗
38. Amna T, Hassan MS, Barakat NA, Pandeya DR, Hong ST, Khil MS, Kim HY (2012) Antibacterial activity and interaction mechanism of electrospun zinc-doped titania nanofibers. Appl Microbiol Biotechnol 93(2):743–751. doi: 10.1007/s00253-011-3459-010.1007/s00253-011-3459-0 ↗
39. Sirelkhatim A, Mahmud S, Seeni A, Kaus NHM, Ann LC, Bakhori SKM, Hasan H, Mohamad D (2015) Review on zinc oxide nanoparticles: antibacterial activity and toxicity mechanism. Nano-Micro Lett 7(3):219–242. doi: 10.1007/s40820-015-0040-x10.1007/s40820-015-0040-x ↗