Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding
Source abstract
Abstract
In the presented study, The weldability of AISI 304 austenitic stainless steel to AISI 4340 steel joined by friction welding in different rotational speeds and fatigue behaviour of friction-welded samples were investigated. Tension tests were applied to welded parts to obtain the strength of the joints. The welding zones were examined by scanning electron microscopy (SEM) and analyzed by energy dispersive spectroscopy (EDS). The Vickers microhardness distributions in welding zone were determined. Fatigue tests were performed using a rotational bending fatigue test machine and the fatigue strength has been analysed drawing S-N curves and critically observing fatigue fracture surfaces of the tested samples. The experimental results indicate that mechanical properties and microstructural features are affected significantly by rotation speed and the fatigue strength of friction-welded samples decrease due to chromium carbide precipitation in welding zone with increasing rotation speed in choosen conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Fatigue and fracture mechanics · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. SEUNG HWAN and C. PARK, et.al., Corrosion resistance of friction stir welded 304 stainless steel, Scripta Materialia 51 (2004) 101.10.1016/j.scriptamat.2004.04.001 ↗
2. C. R. DAS, A. K. BHADURI and S. K. RAY, Fatigue failure of a fillet welded nozzle joint, Engineering Failure Analysis 10 (2003) 667.10.1016/S1350-6307(03)00062-1 ↗
3. H. U. HONG, B. S. RHO and S. W. NAM, A study on the crack initation and growth from δ-ferrite/γ phase interface under continuous fatigue and creep-fatigue conditions in type 304L stainless steel, International Journal of Fatigue 24 (2002) 1063.10.1016/S0142-1123(02)00019-1 ↗
4. K. S. MIN, K. J. KIM and S. W. NAM, Investigation of the types and densities of grain boundary carbides on grain boundary cavitation resistance of AISI 321 stainless steel under creep-fatigue interaction, Journal of Alloys and Compound 370 (2004) 223.10.1016/j.jallcom.2003.09.129 ↗
5. E. J. RAO, B. GUHA, G. MALAKONDAIAH and V. M. RADHAKRISHNAN, Effect of welding process on fatigue crack growth behaviour of austenitic stainless steel welds in a low alloy steel, Theoretical and Applied Fracture Mechanics 27 (1997) 141.10.1016/S0167-8442(97)00016-5 ↗
6. A. VAIRIS and M. FROST, High frequency linear friction welding of a titanium alloy, Wear. 217 (1998) 117.10.1016/S0043-1648(98)00145-8 ↗
7. A. Z. şAHIN, B. S. YIBAş, M. AHMED and J. NICKEL, Analysis of friction welding process in relation to the welding of copper and steel bars, Journal of materials processing technology 82 (1998) 127.10.1016/S0924-0136(98)00032-6 ↗
8. S. SUNDARESAN and K. G. K. MURTI, The formation of intermetallic phases in aluminum-austenitic stainless steel friction welds, Material Forum 17 (1993) 301.
9. S. FUKUMOTO, T. INUKI, H. TSUBAKINO, K. OKITA, M. ARITOSHI and T. TOMITAL, Evaluation of friction weld interface of aluminum to austenitic stainless steel joint, Material Science and Technology 13 (1997) 679.10.1179/026708397790285926 ↗
10. J. W. ELMER and D. D. KAUTZ, “Welding, Brazing and Soldering, ASM Handbook“ (1994) Vol. 6 pp. 150.
11. H. BEHNKEN and V. HAUK, Micro-residual stresses caused by deformation, heat, or their combination during friction welding, Materials Science and Engineering A289 (2000) 60.10.1016/S0921-5093(00)00923-0 ↗
12. P. JOHAN SINGH, B. GUHA and D. R. G. ACHAR, Fatigue life prediction for stainless steel welded CCT geometry based on Lawrance's local-stress approach, Engineering Failure Analysis 10 (2003) 655.10.1016/S1350-6307(03)00044-X ↗
13. L. W. TSAY, Y. C. LIU, M. C. YOUNG and D. Y. LIN, Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen, Materials Science and Engineering A374 (2004) 204.10.1016/j.msea.2004.02.018 ↗
14. M. A. WAHAP and M. SAKANO, Corrosion and biaxial fatigue of welded structures, Journal of Materials Processing Technology 143–144 (2003) 410.
15. P. ASOKA-KUMAR and J. H. HARDLEY, et. al., Direct observation of carbon-decorated defects in fatigued type 304 stainless steel using positron annihilation spectroscopy, Acta Materialia 50 (2002) 1761.10.1016/S1359-6454(02)00027-7 ↗
16. S. H. C. PARK, et.al., Corrosion resistance of friction stir welded 304 stainless steel, Scripta Materialia 51 (2004) 101.10.1016/j.scriptamat.2004.04.001 ↗
17. D. O'SULLIVAN and M. COTTERELL, Machinability of austenitic stainless steel SS303, Journal of Materials Processing Technology 124 (2002) 153.10.1016/S0924-0136(02)00197-8 ↗
18. M. EROGLU, T. L. KHAN and N. ORHAN, Diffusion bonding between Ti-6Al-4V alloy and micro duplex stainless with copper interlayer, Mater. Sci. Technol. 18 (2002) 68.10.1179/026708301125000230 ↗
19. S. H. ZHU, P. K. LIAW, J. M. CORUM, and H. E. MCCOY, Jr, High temperature mechanical behaviour of Ti-6A-4V alloy and TiCp /Ti-6Al-4V composite, Metall. Trans. A30 (1999) 1569.10.1007/s11661-999-0094-9 ↗
20. A. M. SILVA ANTONIO, MEYER AXEL, F. DOS SANTOS JORGE, E. F. KWIETNIEWSKI CARLOS and T. E. STROHAECKER, Mechanical and metallurgical properties of friction welded TiC particulate reinforced Ti-6Al-4V, Composites Science and Technology 64 (2004) 1495.10.1016/j.compscitech.2003.10.017 ↗
21. H. U. Hong, B. S. Rhu, S. W. Nam, Correlation of the M23C6 precipitation morphology with grain boundary characteristics in austenitic stainless steel, Materials Science and Engineering A318 (2001) 285.10.1016/S0921-5093(01)01254-0 ↗
22. BYUNG SUP RHO and SOO WOO NAM, Effects of nitrogen on low-cycle fatigue properties of type 304 L austenitic stainless steels tested with and without tensile strain hold, Journal of Nuclear Materials 300 (2002) 65.10.1016/S0022-3115(01)00709-7 ↗
23. J. C. NEWMAN, The merging of fatigue and fracture mechanics concepts; a historical perspective, Fatigue and Fracture Mechanics 8 (1997) 3 [ASTM STP 1321].