The effect of processing conditions on the morphology, thermomechanical, dielectric, and piezoelectric properties of P(VDF-TrFE)/BaTiO3 composites
Source abstract
Abstract
In this study (0–3) P(VDF-TrFE)/BaTiO3 composites containing up to 60 vol% of ceramic phase were prepared by solvent casting or compression molding. Their thermomechanical, dielectric, and piezoelectric properties were investigated, and discussed in the light of the properties of the basic components, the processing route and the resulting morphology. The crystalline structure of the P(VDF-TrFE) matrix was found to be highly dependent on the processing route, while the structure of BaTiO3 was not affected by any of the processing steps. The mechanical properties of the solvent cast materials showed a maximum at 30 vol% BaTiO3, while they increased monotonically with BaTiO3 content for compression molded materials. This difference was attributed to a higher amount of porosity and inhomogeneities in the solvent cast composites. Permittivity as high as 120 and piezoelectric coefficient d33 up to 32 pC/N were obtained for compression molded composites, and the observed decrease in d33 with aging time was attributed to the effect of mechanical stress release in the polymer matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Advanced Sensor and Energy Harvesting Materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Dias CJ, Dasgupta DK (1994) In: Ferroelectric polymers and ceramic-polymer composites. Key engineering materials, vol 92–9. Trans Tech Publications, Clausthal Zellerfe, p 217
2. Akdogan EK, Allahverdi M, Safari A (2005) IEEE Trans Ultrason Ferroelectr Freq Control 52(5):74610.1109/TUFFC.2005.1503962 ↗
3. Newnham RE, Skinner DP, Cross LE (1978) Mater Res Bull 13(5):52510.1016/0025-5408(78)90161-7 ↗
4. Han KH, Safari A, Riman RE (1991) J Am Ceram Soc 74(7):169910.1111/j.1151-2916.1991.tb07165.x ↗
5. Sa-Gong C, Safari A, Newnham RE (1986) In: IEEE proceedings of the 6th international symposium on applications of ferroelectrics, Bethlehem, p 281. doi: 10.1109/ISAF.1986.20114210.1109/ISAF.1986.201142 ↗
6. Yamamoto T, Urabe K, Banno H (1993) Jpn J Appl Phys 32:427210.1143/JJAP.32.4272 ↗
7. Chau KH, Wong YW, Shin FG (2007) Appl Phys Lett 91(25):3. doi: 10.1063/1.2827571
8. Capsal JF, Dantras E, Dandurand J, Lacabanne C (2006) J Non-Cryst Solids 353:4437. doi: 10.1016/j.jnoncrysol.2007.01.09710.1016/j.jnoncrysol.2007.01.097 ↗
9. Petchsuk A, Supmak W, Thanaboonsombut A (2009) J Appl Polym Sci 114(2):1048. doi: 10.1002/app.3063610.1002/app.30636 ↗
10. Ploss B, Ng W-Y, Chan HL-W, Ploss B, Choy C-L (2001) Compos Sci Technol 61(7):95710.1016/S0266-3538(00)00193-7 ↗
11. Ploss B, Shin FG, Chan HLW, Choy CL (2000) IEEE Trans Dielectr Electr Insul 7(4):51710.1109/94.868071 ↗
12. Chan HLW, Ng PKL, Choy CL (1999) Appl Phys Lett 74(20):302910.1063/1.124054 ↗
13. Zeng R, Kwok KW, Chan HLW, Choy CL (2002) J Appl Phys 92(5):2674. doi: 10.1063/1.149769910.1063/1.1497699 ↗
14. Helke G, Lubitz K (2008) In: Heywang W, Lubitz K, Wersing W (eds) Piezoelectricity. Evolution and future of a technology. Springer series in materials science, vol 114. Springer, Berlin, p 89
15. Chen XD, Yang DB, Jiang YD, Wu ZM, Li D, Gou FJ, Yang JD (1998) Sens Actuators, A 65(2–3):19410.1016/S0924-4247(97)01685-3 ↗
16. Yao JL, Xiong CX, Dong LJ, Chen C, Lei YA, Chen L, Li R, Zhu QM, Liu XF (2009) J Mater Chem 19(18):2817. doi: 10.1039/b819910h10.1039/b819910h ↗
17. Kerimov MK, Kurbanov MA, Musaeva SN, Geidarov GM, Aliev GG (2009) Tech Phys Lett 35(2):166. doi: 10.1134/s106378500902020510.1134/S1063785009020205 ↗
18. Panda PK (2009) J Mater Sci 44(19):5049. doi: 10.1007/s10853-009-3643-010.1007/s10853-009-3643-0 ↗
19. Karaki T, Yan K, Miyamoto T, Adachi M (2007) Jpn J Appl Phys 46(4):L97. doi: 10.1143/jjap.46.l9710.1143/JJAP.46.L97 ↗
20. Xu JW, Moon KS, Pramanik P, Bhattacharya S, Wong CP (2007) IEEE Trans Compon Packag Technol 30(2):248. doi: 10.1109/tcapt.2007.89835210.1109/TCAPT.2007.898352 ↗
21. Dang ZM, Wang HY, Xu HP (2006) Appl Phys Lett 89(11):3. doi: 10.1063/1.2338529
22. Dang ZM, Xu HP, Wang HY (2007) Appl Phys Lett 90(1):3. doi: 10.1063/1.2393150
23. Dang Z-M, Yu Y-F, Xu H-P, Bai J (2008) Compos Sci Technol 68(1):17110.1016/j.compscitech.2007.05.021 ↗
24. Kim P, Doss NM, Tillotson JP, Hotchkiss PJ, Pan MJ, Marder SR, Li JY, Calame JP, Perry JW (2009) ACS Nano 3(9):2581. doi: 10.1021/nn900641210.1021/nn9006412 ↗
25. Luo XT, Chen LF, Chen XJ, Huang QJ (2004) J Mater Sci Technol 20(4):44110.1179/026708304225016725 ↗
26. Chan HLW, Cheung MC, Choy CL (1999) Ferroelectrics 224(1–4):541
27. Patil R, Ashwin A, Radhakrishnan S (2007) Sens Actuators, A 138(2):361. doi: 10.1016/j.sna.2007.05.02510.1016/j.sna.2007.05.025 ↗
28. Muralidhar C, Pillai PKC (1986) IEEE Trans Electr Insul 21(3):50110.1109/TEI.1986.349100 ↗
29. Venkatragavaraj E, Satish B, Vinod PR, Vijaya MS (2001) J Phys D-Appl Phys 34(4):48710.1088/0022-3727/34/4/308 ↗
30. Dietze M, Krause J, Solterbeck CH, Es-Souni M (2007) J Appl Phys 101: 054113. doi: 10.1063/1.265397810.1063/1.2653978 ↗
31. Mao YP, Mao SY, Ye ZG, Xie ZX, Zheng LS (2010) J Appl Phys 108: 014102. doi: 10.1063/1.344358210.1063/1.3443582 ↗
32. Lam KH, Wang XX, Chan HLW (2005) Compos A Appl Sci Manuf 36(11):1595. doi: 10.1016/j.compositesa.2005.03.00710.1016/j.compositesa.2005.03.007 ↗
33. Dang ZM, Yuan JK, Zha JW, Zhou T, Li ST, Hu GH (2012) Prog Mater Sci 57(4):66010.1016/j.pmatsci.2011.08.001 ↗
34. Chanmal CV, Jog JP (2008) Express Polym Lett 2(4):294. doi: 10.3144/expresspolymlett.2008.3510.3144/expresspolymlett.2008.35 ↗
35. Cheung MC, Chan HLW, Choy CL (2001) Ferroelectrics 264(1–4):1721
36. Dang ZM, Zheng Y, Xu HP (2008) J Appl Polym Sci 110(6):3473. doi: 10.1002/app.2885610.1002/app.28856 ↗
37. Gregorio R, Cestari M, Bernardino FE (1996) J Mater Sci 31(11):2925. doi: 10.1007/bf0035600310.1007/BF00356003 ↗
38. Iijima M, Sato N, Wuled Lenggoro I, Kamiya H (2009) Colloids Surf A 352(1–3):8810.1016/j.colsurfa.2009.10.005 ↗
39. Muralidhar C, Pillai PKC (1989) Ferroelectrics 89:1710.1080/00150198908017880 ↗
40. Muralidhar C, Pillai PKC (1987) J Mater Sci Lett 6(3):34610.1007/BF01729348 ↗
41. Patsidis A, Psarras GC (2008) Express Polym Lett 2(10):718. doi: 10.3144/expresspolymlett.2008.8510.3144/expresspolymlett.2008.85 ↗
42. Ramajo L, Castro MS, Reboredo MM (2007) Compos A Appl Sci Manuf 38(8):185210.1016/j.compositesa.2007.04.003 ↗
43. Ramajo L, Reboredo M, Castro M (2005) Compos A Appl Sci Manuf 36(9):1267. doi: 10.1016/j.compositesa.2005.01.02610.1016/j.compositesa.2005.01.026 ↗
44. Kar-Gupta R, Venkatesh TA (2008) Acta Mater 56(15):381010.1016/j.actamat.2008.04.031 ↗
45. Chandradass J, Bae DS (2008) Mater Manuf Processes 23(2):117. doi: 10.1080/10426910701774320
46. Marra SP, Ramesh KT, Douglas AS (1999) The mechanical properties of lead-titanate/polymer 0–3 composites. Compos Sci Technol 59(14):216310.1016/S0266-3538(99)00073-1 ↗
47. Marra SP, Ramesh KT, Douglas AS (1999) Smart Mater Struct 8(1):5710.1088/0964-1726/8/1/006 ↗
48. Dutta PK, Asiaie R, Akbar SA, Zhu W (1994) Chem Mater 6(9):1542. doi: 10.1021/cm00045a01110.1021/cm00045a011 ↗
49. Baeten F, Derks B, Coppens W, van Kleef E (2006) J Eur Ceram Soc 26(4–5):58910.1016/j.jeurceramsoc.2005.06.029 ↗
50. Lovinger AJ, Furukawa T, Davis GT, Broadhurst MG (1983) Polymer 24(10):122510.1016/0032-3861(83)90050-2 ↗
51. Kodama H, Takahashi Y, Furukawa T (1997) Ferroelectrics 203(1):43310.1080/00150199708012865 ↗
52. Gregorio RJ, Botta MM (1998) J Polym Sci Part B 36(3):40310.1002/(SICI)1099-0488(199802)36:3<403::AID-POLB2>3.0.CO;2-S ↗
53. Simoes R, Rodriguez-Perez M, De Saja J, Constantino C (2009) Polym Eng Sci 49(11):2150. doi: 10.1002/pen.2145510.1002/pen.21455 ↗
54. Yagi T, Tatemoto M, Sako J (1980) Polym J 12(4):20910.1295/polymj.12.209 ↗
55. Sencadas V, Lanceros-Méndez S, Mano JF (2006) J Non-Cryst Solids 352(50–51):537610.1016/j.jnoncrysol.2006.08.025 ↗
56. Zhang SH, Klein RJ, Ren KL, Chu BJ, Zhang X, Runt J, Zhang QM (2006) J Mater Sci 41(1):271. doi: 10.1007/s10853-006-6081-210.1007/s10853-006-6081-2 ↗
57. Hashin Z, Shtrikman S (1963) J Mech Phys Solids 11(2):12710.1016/0022-5096(63)90060-7 ↗
58. Dent AC, Bowen CR, Stevens R, Cain MG, Stewart M (2007) J Eur Ceram Soc 27(13–15):3739. doi: 10.1016/j.jeurceramsoc.2007.02.03110.1016/j.jeurceramsoc.2007.02.031 ↗
59. Tessier-Doyen N, Glandus JC, Huger M (2007) J Mater Sci 42(14):5826. doi: 10.1007/s10853-006-1386-810.1007/s10853-006-1386-8 ↗
60. Jayasundere N, Smith BV (1993) J Appl Phys 73(5):246210.1063/1.354057 ↗
61. Kerner EH (1956) Proc Phys Soc B 69(8):80210.1088/0370-1301/69/8/304 ↗