Electrophoretic deposition of electrolyte materials for solid oxide fuel cells
Source abstract
Abstract
Electrophoretic deposition of electrolyte materials for solid oxide fuel cells, including La 0.8 Sr 0.2 Ga 0.875 Mg 0,125 O 3-x , yttria stabilized zirconia and (Ce 0.8 Gd 0.2 )O 1.9 , was studied under various experimental conditions. The use of phosphate ester as a dispersant and poly (vinyl butyral) as a binder enabled high deposition rate and formation of crack-free, adherent deposits. Electrodeposition rates were quantified in experiments performed at constant current and constant voltage modes from suspensions in ethanol, isopropanol and mixed ethanol-isopropanol solvents. The microstructure of as prepared and sintered deposits was studied by electron microscopy. The bath composition was optimized to enable formation of dense deposits.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · TiO2 Photocatalysis and Solar Cells · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. M. S. J. Gani, Industr. Ceram. 14 (1994) 163.
2. P. Sarkar and P. S. Nicholson, J. Amer. Ceram. Soc. 79 (1996) 1987.10.1111/j.1151-2916.1996.tb08929.x ↗
3. R. Moreno and B. Ferrari, Bull. Amer. Ceram. Soc. 79 (2000) 44.
4. A. R. Boccaccini, P. A. Trusty, D. M. R. Taplin and C. B. Ponton, J. Europ. Ceram. Soc. 16 (1996) 1319.10.1016/0955-2219(96)00063-5 ↗
5. C. Kaya, A. R. Boccaccini and K. K. Chawla, J. Amer. Ceram. Soc. 83 (2000) 1885.10.1111/j.1151-2916.2000.tb01486.x ↗
6. T. Ishihara, K. Sato and Y. Takita, ibid. 79 (1996) 913.10.1111/j.1151-2916.1996.tb08525.x ↗
7. T. Ishihara, K. Shimose, T. Kudo, H. Nishiguchi, T. Akbay and Y. Takita, ibid. 83 (2000) 1921.10.1111/j.1151-2916.2000.tb01491.x ↗
8. H. Negishi, N. Sakai, K. Yamaji, T. Horita and H. Yokokawa, J. Electrochem. Soc. 147 (2000) 1682.10.1149/1.1393418 ↗
9. Z. Peng and M. Liu, J. Amer. Ceram. Soc. 84 (2001) 283.10.1111/j.1151-2916.2001.tb00651.x ↗
10. F. Chen and M. Liu, J. Europ. Ceram. Soc. 21 (2001) 127.10.1016/S0955-2219(00)00195-3 ↗
11. R. N. Basu, C. A. Randall and M. J. Mayo, J. Amer. Ceram. Soc. 84 (2001) 33.10.1111/j.1151-2916.2001.tb00604.x ↗
12. J. Will, M. K. M. Hruschka, L. Gubler and L. J. Gauckler, ibid. 84 (2001) 328.10.1111/j.1151-2916.2001.tb00658.x ↗
13. I. Zhitomirsky and A. Petric, J. Europ. Ceram. Soc. 20 (2000) 2055.10.1016/S0955-2219(00)00098-4 ↗
14. I. Zhitomirsky, JOM, The Miner., Met. Mater. Soc. J. 53 (2001) 48.10.1007/s11837-001-0071-2 ↗
15. T. Mathews, N. Rabu, J. R. Sellar and B. C. Muddle, Solid State Ion. 128 (2000) 111.10.1016/S0167-2738(99)00308-2 ↗
16. I. Zhitomirsky, J. Europ. Ceram. Soc. 18 (1998) 849.10.1016/S0955-2219(97)00213-6 ↗
17. J. Van Tassel and C. A. Randall, ibid. 19 (1999) 955.10.1016/S0955-2219(98)00352-5 ↗
18. I. Zhitomirsky and L. Gal-Or, J. Mater. Sci.: Mater. Med. 8 (1997) 213.
19. W. M. Winslow, J. Appl. Phys. 20 (1949) 1137.10.1063/1.1698285 ↗
20. H. Ohshima, Coll. Surf.A: Physicochem. Engin. Asp. 103 (1995) 249.10.1016/0927-7757(95)03293-M ↗
21. K. Mikeska and W. R. Cannon, in “Advances in Ceramics. Forming of Ceramics,” edited by J. A. Mangels and G. L. Messing (American Ceramic Society, Columbus, OH, 1984) Vol. 9, p. 164.
22. K. Mikeska, Coll. Surf. 29 (1988) 305.10.1016/0166-6622(88)80125-2 ↗
23. T. Chartier, E. Streicher and P. Boch, Bull. Amer. Ceram. Soc. 66 (1987) 1653.
24. U. Paik, V. A. Hackley, S.-C. Choi and Y.-G. Jung, Coll. Surf. A: Physicochem. Engin. Asp. 135 (1998) 77.10.1016/S0927-7757(97)00234-3 ↗
25. D. H. Napper, “Polymeric Stabilization of Colloidal Dispersions,” (Academic Press, London, 1983) p. 20.
26. W. R. Cannon, R. Becker and K. R. Mikeska, in “Advances in Ceramics. Ceramic Substrates and Packages for Electronic Applications,” edited by M. F. Yan, K. Niwa, H. M. O'Bryan, Jr. and W. S. Young (American Ceramic Society, Westerville, OH, 1989) Vol. 26, p. 525.
27. I. Zhitomirsky and A. Petric, in Proceedings of the 1st International Conference on Electrophoretic Deposition, Banff, Canada, 2002, p. 222.
28. G. F. Hudson, M. M. Andrews and S. Raghavan, Coll. Polym. Sci. 271 (1993) 56.10.1007/BF00652303 ↗
29. R. Moreno, Bull. Amer. Ceram. Soc. 71 (1992) 1521.
30. A. C. Caballero, J. F. FernÁndez, C. Moure and P. DurÁn, Mater. Res. Bull. 32 (1997) 221.10.1016/S0025-5408(96)00179-1 ↗
31. W. R. Cannon, J. R. Morris and K. R. Mikeska in “Advances in Ceramics. Multilayer Ceramic Devices,” edited by J. B. Blum and W. R. Cannon (American Ceramic Society, Westerville, OH, 1986) Vol. 19, p. 161.
32. J. H. Jean, S. F. Yeh and C. J. Chen, J. Mater. Res. 12 (1997) 1062.10.1557/JMR.1997.0148 ↗
33. S. Bhattacharjee, M. K. Paria and H. S. Maiti, J. Mater. Sci. 28 (1993) 6490.10.1007/BF01352219 ↗
34. M. D. Sacks and G. W. Scheiffele in “Advances in Ceramics. Multilayer Ceramic Devices,” edited by J. B. Blum and W. R. Cannon (American Ceramic Society, Westerville, OH, 1986) Vol. 19, p. 175.
35. M. D. Sacks, C. S. Khadilkar, G. W. Scheiffele, A. V. Shenoy, J. H. Dow and R. S. Sheu, in “Advances in Ceramics. Ceramic Powder Science,” edited by G. L. Messing, K. S. Mazdiyasni, J. W. McCauley and R. A. Haber (American Ceramic Society, Westerville, OH, 1987) Vol. 21, p. 495.
36. K. Nakamae, K. Sumiya, T. Taii and T. Matsumoto, J. Polym. Sci: Polym. Simp. 71 (1984) 109.
37. E. Dickinson and L. Eriksson, Adv. Coll. Interf. Sci. 34 (1991) 1.10.1016/0001-8686(91)80045-L ↗