Wetting and interactions of Ni- and Co-based superalloys with different ceramic materials
Source abstract
Abstract
In this work, a systematic study of the wetting behavior of two Ni-based and one Co-based superalloys, used, in particular, for the fabrication of turbine blades, is presented with reference to different ceramic substrates: sapphire, polycrystalline alumina, zirconia, and mullite. Wettability tests have been performed by means of the ''sessile drop'' method at 1500 ?C; the characterization of the interfaces between the molten drop and the substrates has been performed by SEM/EDS analysis in order to check the final characteristics of the solidified interfaces. The results are discussed in terms of chemical interactions in relation to the processing parameters and as a function of the surface and interfacial, morphological and energetic properties of the systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Konter M, Thumann M (2001) J Mat Proc Tech 117:38610.1016/S0924-0136(01)00785-3 ↗
2. Donachie MJ, Donachie SJ (2002) Superalloys a technical guide. ASM Intl, Materials Park, Ohio10.31399/asm.tb.stg2.9781627082679 ↗
3. D’Souza N (2009) Mat Sci Tech Ser 25(2):17010.1179/174328408X369302 ↗
4. Kanetkar CS, Kacar AS, Stefanescu DM (1988) Metall Trans A 19A:183310.1007/BF02645152 ↗
5. Virieux XY, Desmaison J, Labbe JC, Gabriel A (1997) Mater Sci Forum 251:92510.4028/www.scientific.net/MSF.251-254.925 ↗
6. Jia Q, Cui YY, Yang R (2006) J Mater Sci 41(10):3045. doi: 10.1007/s10853-006-6785-310.1007/s10853-006-6785-3 ↗
7. Mileiko ST (2006) Curr Opin Solid State Mater Sci 9(4):219
8. Asthana R, Mileiko ST, Sobczak N (2006) Bull Polish Acad Sci 54(2):14710.4064/ba54-2-6 ↗
9. Muolo ML, Ferrera E, Morbelli L, Passerone A (2004) Scr Mater 50(3):32510.1016/j.scriptamat.2003.10.015 ↗
10. Arroyave R, Eagar TW, Larson H (2003) Fuel Chem Div Prepr 48(1):247
11. Sciti D, Bellosi A, Esposito L (2001) J Am Ceram Soc 21(1):4510.1016/S0955-2219(00)00162-X ↗
12. Eustathopoulos N, Nicholas MG, Drevet B (1999) Wettability at high temperatures. Pergamon Materials Series, Oxford
13. Liggieri L, Passerone A (1989) High Temp Technol 7:8210.1080/02619180.1989.11753417 ↗
14. Passerone A, Ricci E (1998) Drops and bubbles in interfacial research. Elsevier, Amsterdam
15. Eustathoupoulos N, Sobczak N, Passerone A, Nogi K (2005) J Mater Sci 40:2271. doi: 10.1007/s10853-005-1945-410.1007/s10853-005-1945-4 ↗
16. Champion JA, Keene BJ, Sillwood JM (1969) J Mater Sci 4:39. doi: 10.1007/BF0055504610.1007/BF00555046 ↗
17. Saiz E, Tomsia AP, Cannon RM (1998) Acta Mater 46(7):234910.1016/S1359-6454(98)80016-5 ↗
18. Grigorenko N, Zhuravlev V, Poluyanskaya V, Naidich YV, Eusthatoupoulos N, Silvain JF, Bihr JC (1998) In: Eustathopoulos N, Sobczak N (eds) Proceedings of 2nd high temperature capillarity conf. Foundry Research Inst., Cracow, pp 133–137
19. Champion JA, Keene BJ, Sillwood JM (1969) J Mater Sci 4:1111. doi: 10.1007/BF0054985210.1007/BF00549852 ↗
20. Passerone A (1971) Ann Chim 61:212
21. Levi G, Scheu C, Kaplan WD (2001) Interface Sci 9:21310.1023/A:1015198409536 ↗
22. Levi G, Clarke DR, Kaplan WD (2004) Interface Sci 12:7310.1023/B:INTS.0000012295.38485.90 ↗
23. Crispin RM, Nicholas D (1976) J Mater Sci 11:17. doi: 10.1007/BF0054106910.1007/BF00541069 ↗
24. Kurkjian CR, Kingery WD (1956) J Phys Chem 60:96110.1021/j150541a033 ↗
25. Sutton WH, Feingold E (1966) Mater Sci Res 3:577
26. Kritsalis P, Merlin V, Coudurier L, Eusthatopoulos N (1992) Acta Metall Mater 40(6):116710.1016/0956-7151(92)90415-B ↗
27. Wan C, Kritsalis P, Drevet B, Eustathopoulos N (1996) Mater Sci Eng A 207:18110.1016/0921-5093(95)10020-2 ↗
28. Beruto D, Barco L, Passerone A (1981) In: Vijh AK (ed) Oxides and Oxide films. M. Dekker INC, New York
29. Barin I, Knacke O (1973) Thermochemical properties of inorganic substances. Springer, Berlin
30. Durov AV, Naidich YV, Kostyuk BD (2005) J Mater Sci 40:2173. doi: 10.1007/s10853-005-1928-510.1007/s10853-005-1928-5 ↗
31. Nikolopoulos P, Ondracek G, Sotiropoulou D (1989) Ceram Int 15:20110.1016/0272-8842(89)90039-4 ↗
32. Munoz MC, Gallego S, Beltran JI, Cerdà J (2006) Surf Sci Rep 61:30310.1016/j.surfrep.2006.03.002 ↗
33. Sotiropoulou D, Nikolopoulos P (1993) J Mater Sci 28:356. doi: 10.1007/BF0035780710.1007/BF00357807 ↗
34. Davis RF, Aksay IA, Pask JA (1972) J Am Ceram Soc 55(2):9810.1111/j.1151-2916.1972.tb11218.x ↗
35. Grosheva VM, Panasevich VM, Boichun VYu (1968) Glass Ceram 25(3):18010.1007/BF00680646 ↗
36. Schneider H, Komarneni S (2005) Mullite. Wiley-VCH, Weinheim10.1002/3527607358 ↗
37. Fahrenholtz WG, Ewsuk KG, Tomsia AP, Loehman RE (1996) In: Tomsia AP, Glaeser AM (eds) Ceramic microstructures. Plenum Press, New York and London