Aligned carbon nanotube–epoxy composites: the effect of nanotube organization on strength, stiffness, and toughness
Source abstract
Abstract
A protocol has been developed for the production of epoxy-based composites containing high-volume fractions of aligned carbon nanotubes. The nanotubes were fabricated as continuous fibres or aligned mats directly from the CVD reactor, in which they were synthesized. The block composites with highly aligned and tightly packed nanotube assemblies were prepared via epoxy resin infiltration, and their volume fraction, distribution, and internal porosity being analysed prior to mechanical testing. The samples were tested in both axial tension and three-point bending. The results show that the strength and stiffness enhancements were close to pro rata with the volume fraction of the carbon nanotubes added. The failure modes were distinctly different from those characteristic of the conventional aligned carbon fibre composites. The fracture surface showed considerable evidence of pull-out of bundles of (~50) nanotubes, but the pull-out appeared to involve the resin matrix which drew out along with the bundles. Subsidiary cracks were bridged by nanotube bundles giving structures reminiscent of crazes in glassy polymers, what constitutes the distinct toughness mechanism and higher resistance to the transverse cracks propagation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Behabtu N, Young CC, Tsentalovich DE, Kleinerman O, Wang X, Ma AWK, Bengio EA, Waarbeek RF, Jong JJ, Hoogerwerf RE, Fairchild SB, Ferguson JB, Maruyama B, Kono J, Talmon Y, Cohen Y, Otto MJ, Pasquali M (2013) Strong, light, multifunctional fibers of carbon nanotubes with ultrahigh conductivity. Science 339(6116):182–186. doi: 10.1126/science.122806110.1126/science.1228061 ↗
2. Jiang C, Saha A, Young CC, Hashim DP, Ramirez CE, Ajayan PM, Pasquali M, Marti AA (2014) Macroscopic nanotube fibers spun from single-walled carbon nanotube polyelectrolytes. ACS Nano 8(9):9107–9112. doi: 10.1021/nn502552q10.1021/nn502552q ↗
3. Zhang M, Atkinson KR, Baughman RH (2004) Multifunctional carbon nanotube yarns by downsizing an ancient technology. Science 306(5700):1358–1361. doi: 10.1126/science.110427610.1126/science.1104276 ↗
4. Vilatela JJ, Windle AH (2010) Yarn-like carbon nanotube fibers. Adv Mater 22(44):4959–4963. doi: 10.1002/adma.20100213110.1002/adma.201002131 ↗
5. Aleman B, Reguero V, Mas B, Vilatela JJ (2015) Strong carbon nanotube fibers by drawing inspiration from polymer fiber spinning. ACS Nano 9(7):7392–7398. doi: 10.1021/acsnano.5b0240810.1021/acsnano.5b02408 ↗
6. Xu F, Sadrzadeh A, Xu Z, Yakobson BI (2013) Can carbon nanotube fibers achieve the ultimate conductivity?—coupled-mode analysis for electron transport through the carbon nanotube contact. J Appl Phys 114:063714. doi: 10.1063/1.481830810.1063/1.4818308 ↗
7. Lekawa-Raus A, Patmore J, Kurzepa L, Bulmer J, Koziol K (2014) Electrical properties of carbon nanotube based fibers and their future use in electrical wiring. Adv Funct Mater 24:3661–3682. doi: 10.1002/adfm.20130371610.1002/adfm.201303716 ↗
8. Koziol K, Vilatela J, Moisala A, Motta M, Cunniff P, Sennett M, Windle A (2007) High-performance carbon nanotube fiber. Science 318:1892–1895. doi: 10.1126/science.114763510.1126/science.1147635 ↗
9. Windle A (2014) Carbon nanotube fibres: science and technology transfer. Nanoscience and technology for mankind. Humana Press, Allahabad
10. Bradford PD, Wang X, Zhao HB, Maria JP, Jia QX, Zhu YT (2010) A novel approach to fabricate high volume fraction nanocomposites with long aligned carbon nanotubes. Compos Sci Technol 70(13):1980–1985. doi: 10.1016/j.compscitech.2010.07.02010.1016/j.compscitech.2010.07.020 ↗
11. Mecklenburg M, Mizushima D, Ohtake N, Bauhofer W, Fiedler B, Schulte K (2015) On the manufacturing and electrical and mechanical properties of ultra-high wt% fraction aligned MWCNT and randomly oriented CNT epoxy composites. Carbon 91:275–290. doi: 10.1016/j.carbon.2015.04.08510.1016/j.carbon.2015.04.085 ↗
12. Mora RJ, Vilatela JJ, Windle AH (2009) Properties of composites of carbon nanotube fibres. Compos Sci Technol 69(10):1558–1563. doi: 10.1016/j.compscitech.2008.11.03810.1016/j.compscitech.2008.11.038 ↗
13. Vilatela JJ, Khare R, Windle AH (2012) The hierarchical structure and properties of multifunctional carbon nanotube fibre composites. Carbon 50(3):1227–1234. doi: 10.1016/j.carbon.2011.10.04010.1016/j.carbon.2011.10.040 ↗
14. Qiu J, Terrones J, Vilatela JJ, Vickers ME, Elliott JA, Windle AH (2013) Liquid infiltration into carbon nanotube fibers: effect on structure and electrical properties. ACS Nano 7(10):8412–8422. doi: 10.1021/nn401337m10.1021/nn401337m ↗
15. Gspann TS, Montinaro N, Pantano A, Elliott JA, Windle AH (2015) Mechanical properties of carbon nanotube fibres: St Venant’s principle at the limit and the role of imperfections. Carbon 93:1021–1033. doi: 10.1016/j.carbon.2015.05.06510.1016/j.carbon.2015.05.065 ↗
16. Gspann TS, Small FR, Windle AH (2014) Spinning of carbon nanotube fibres using the floating catalyst high temperature route: purity issues and the critical role of sulphur. Faraday Discuss 173:47–65. doi: 10.1039/c4fd00066h10.1039/c4fd00066h ↗
17. Ayres CE, Jha BS, Meredith H, Bowman JR, Bowlin GL, Henderson SC et al (2008) Measuring fiber alignment in electrospun scaffolds: a user’s guide to the 2D fast Fourier transform approach. J Biomater Sci Polym Ed 19(5):603–621. doi: 10.1163/15685620878408964310.1163/156856208784089643 ↗
18. Stein IY, Wardle BL (2013) Coordination number model to quantify packing morphology of aligned nanowire arrays. Phys Chem Chem Phys 15:4033–4040. doi: 10.1039/c3cp43762k10.1039/c3cp43762k ↗
19. Duesberg GS, Loa I, Burghard M, Syassen K, Roth S (2000) Polarized Raman spectroscopy on isolated single-wall carbon nanotubes. Phys Rev Lett 85(25):5436–5439. doi: 10.1103/PhysRevLett.85.543610.1103/PhysRevLett.85.5436 ↗
20. Liu L, Zhang BM, Wang DF, Wu ZJ (2006) Effects of cure cycles on void content and mechanical properties of composite laminates. Compos Struct 73(3):303–309. doi: 10.1016/j.compstruct.2005.02.00110.1016/j.compstruct.2005.02.001 ↗
21. Grunenfelder LK, Centea T, Hubert P, Nutt SR (2013) Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg. Compos Part A Appl Sci 45:119–126. doi: 10.1016/j.compositesa.2012.10.00110.1016/j.compositesa.2012.10.001 ↗
22. Tavares SS, Michaud V, Manson JAE (2009) Through thickness air permeability of prepregs during cure. Compos Part A Appl Sci 40(10):1587–1596. doi: 10.1016/j.compositesa.2009.07.00410.1016/j.compositesa.2009.07.004 ↗
23. Huang H, Talreja R (2005) Effects of void geometry on elastic properties of unidirectional fiber reinforced composites. Compos Sci Technol 65(13):1964–1981. doi: 10.1016/j.compscitech.2005.02.01910.1016/j.compscitech.2005.02.019 ↗
24. Wardle BL, Saito DS, Garcia EJ, Hart AJ, de Villoria RG, Verploegen EA (2008) Fabrication and characterization of ultralight-volume-fraction aligned carbon nanotube-polymer composites. Adv Mater 20(14):2707–2714. doi: 10.1002/adma.2008002952410.1002/adma.20080029524 ↗
25. Centea T, Hubert P (2011) Measuring the impregnation of an out-of-autoclave prepreg by micro-CT. Compos Sci Technol 71(5):593–599. doi: 10.1016/j.compscitech.2010.12.00910.1016/j.compscitech.2010.12.009 ↗
26. Zhu HY, Li DH, Zhang DX, Wu BC, Chen YY (2009) Influence of voids on interlaminar shear strength of carbon/epoxy fabric laminates. Trans Nonferr Metal Soc 19:S470–S47510.1016/S1003-6326(10)60091-X ↗
27. Ginga NJ, Chen W, Sitaraman SK (2014) Waviness reduces effective modulus of carbon nanotube forests by several orders of magnitude. Carbon 66:57–66. doi: 10.1016/j.carbon.2013.08.04210.1016/j.carbon.2013.08.042 ↗
28. Stein IY, Lewis DJ, Wardle BL (2015) Aligned carbon nanotube array stiffness from stochastic three-dimensional morphology. Nanoscale 7:19426–19431. doi: 10.1039/C5NR06436H10.1039/C5NR06436H ↗
29. Fisher FT, Bradshaw RD, Brinson LC (2002) Effects of nanotube waviness on the modulus of nanotube-reinforced polymers. Appl Phys Lett 80(24):4647–4649. doi: 10.1063/1.148790010.1063/1.1487900 ↗
30. Fisher FT, Bradshaw RD, Brinson LC (2003) Fiber waviness in nanotube-reinforced polymer composites—I: modulus predictions using effective nanotube propeties. Comp Sci Technol 63:1689–1703. doi: 10.1016/S0266-3538(03)00069-110.1016/S0266-3538(03)00069-1 ↗
31. Rafiee R (2013) Influence of carbon waviness on the stiffness reduction of CNT/polymer composites. Comp Struct 97:304–309. doi: 10.1016/j.compstruct.2012.10.02810.1016/j.compstruct.2012.10.028 ↗
32. Varischetti J, Jang JS, Gibson RF, Suhr J (2013) Effect of filler waviness and orientation on the damping behavior of CNF-reinforced epoxy composites. J Mat Sci 48:832–840. doi: 10.1007/s10853-012-6803-610.1007/s10853-012-6803-6 ↗
33. Cebeci H, de Villoria RG, Hart AJ, Wardle BL (2009) Multifunctional properties of high volume fraction aligned carbon nanotube polymer composites with controlled morphology. Compos Sci Technol 69(15–16):2649–2656. doi: 10.1016/j.compscitech.2009.08.00610.1016/j.compscitech.2009.08.006 ↗
34. Nam TH, Goto K, Nakayama H, Oshima K, Premalal V, Shimamura Y, Inoue Y, Naito K, Kobayashi S (2014) Effects of stretching on mechanical properties of aligned multi-walled carbon nanotube/epoxy composites. Compos Part A Appl Sci 64:194–202. doi: 10.1016/j.compositesa.2014.05.01310.1016/j.compositesa.2014.05.013 ↗
35. Lopes PE, van Hattum F, Pereira CMC, Novoa PJRO, Forero S, Hepp F, Pambaguian L (2010) High CNT content composites with CNT Buckypaper and epoxy resin matrix: impregnation behaviour composite production and characterization. Compos Struct 92(6):1291–1298. doi: 10.1016/j.compstruct.2009.11.00310.1016/j.compstruct.2009.11.003 ↗
36. Spitalsky Z, Tsoukleri G, Tasis D, Krontiras C, Georga SN, Galiotis C (2009) High volume fraction carbon nanotube–epoxy composites. Nanotechnology 20(40):405702. doi: 10.1088/0957-4484/20/40/40570210.1088/0957-4484/20/40/405702 ↗
37. Li M, Wang Z, Liu Q, Wang S, Gu Y, Li Y, Zhang Z (2015) Carbon nanotube film/epoxy composites with high strength and toughness. Polym Compos. doi: 10.1002/pc.2361710.1002/pc.23617 ↗
38. Cheng QF, Wang JP, Wen JJ, Liu CH, Jiang KL, Li QQ, Fan SS (2010) Carbon nanotube/epoxy composites fabricated by resin transfer molding. Carbon 48(1):260–266. doi: 10.1016/j.carbon.2009.09.01410.1016/j.carbon.2009.09.014 ↗
39. Boncel S, Sundaram RM, Windle AH, Koziol KKK (2011) Enhancement of the mechanical properties of directly spun CNT fibers by chemical treatment. ACS Nano 5(12):9339–9344. doi: 10.1021/nn202685x10.1021/nn202685x ↗
40. Miller SG, Williams TS, Baker JS, Sola F, Lebion-Colon M, McCorkle LS, Wilmoth NG, Gaier J, Chen M, Meador MA (2014) Increased tensile strength of carbon nanotube yarns and sheets through chemical modification and electron beam irradiation. ACS Appl Mater Interfaces 6(9):6120–6126. doi: 10.1021/am405827710.1021/am4058277 ↗
41. Filleter T, Espinosa HD (2013) Multi-scale mechanical improvement produced in carbon nanotube fibers by irradiation cross-linking. Carbon 56:1–11. doi: 10.1016/j.carbon.2012.12.01610.1016/j.carbon.2012.12.016 ↗
42. Naraghi M, Filleter T, Moravsky A, Locascio M, Loutfy RO, Espinosa HD (2010) A multiscale study of high performance double-walled nanotube-polymer fibers. ACS Nano 4(11):6463–6476. doi: 10.1021/nn101404u10.1021/nn101404u ↗
43. Ma W, Liu L, Zhang Z, Yang R, Liu G, Zhang T, An X, Yi X, Ren Y, Niu Z, Li J, Dong H, Zhou W, Ajayan PM, Xie S (2009) High-strength composite fibers: realizing true potential of carbon nanotubes in polymer matrix through continuous reticulate architecture and molecular level couplings. Nano Lett 9(8):2855–2861. doi: 10.1021/n1901035v10.1021/n1901035v ↗
44. Shimamura Y, Oshima K, Tohgo K, Fujii T, Shirasu K, Yamamoto G, Hashida T, Goto K, Ogasawara T, Naito K, Nakano T, Inoue Y (2014) Tensile mechanical properties of carbon nanotube/epoxy composite fabricated by pultrusion of carbon nanotube spun yarn preform. Compos A Appl Sci Manuf 62:32–38. doi: 10.1016/j.compositesa.2014.03.01110.1016/j.compositesa.2014.03.011 ↗
45. Lachman N, Wagner HD (2010) Correlation between interfacial molecular structure and mechanics in CNT/epoxy nano-composites. Compos Part A Appl Sci 41(9):1093–1098. doi: 10.1016/j.compositesa.2009.08.02310.1016/j.compositesa.2009.08.023 ↗
46. Bucknall CB (1977) Toughened plastics. Applied Science Publishers Ltd, London, UK10.1007/978-94-017-5349-4 ↗