Laser surface alloying: a bibliography

1. F. E. Cunningham, ?The Use of Lasers for the Production of Surface Alloys?, MS thesis, Massachusetts Institute of Technology (1964).

2. L. I. Mirkin, ?On the Possibility of Impregnating Iron with Carbon by the Action of a Laser Light Pulse?,Dokl. Akad. Nauk SSSR 186 (1969) 305. [English referenceSov. Phys. Dokl. 14 (1969) 494.]

3. A. O. Schmidt, ?Tool and Engineering Materials with Hard, Wear-Resistant Infusions?,J. Eng. Ind. 91 (1969) 549.10.1115/1.3591627 ↗

4. A. I. Betaneli, L. I. Danilenko, T. N. Loladze, E. F. Semiletova, B. M. Zhriyakov andA. K. Fannibo, ?Investigation of Possible Additional Surface Alloying of R18 Steel using a Laser Beam?,Fiz. I. Khim. Obrab. Mater. (6) (1972) 22.

5. I. V. Gazuko, L. L. Krapivin andL. I. Mirkin, ?Use of Laser Beam Heating for the Sintering of Powders and Chemicothermal Treatment of Metal Surfaces?,Poroshk. Metall. 133 (1) (1974) 27.

6. F. D. Seaman andD. S. Gnanamutha, ?Using the Industrial Laser to Surface Harden and Alloy?,Met. Prog. 108 (3) (1975) 67.

7. V. S. Kovalenko andV. I. Volgin, ?Laser Alloying of Structural Materials?,Tekhnol. Organ. Proizvod. (7) (1976) 60.

8. V. S. Kovalenko, V. I. Volgin andV. V. Mikhailov, ?Electrophysical and Electrochemical Methods of Treating Parts, Improved Technology for Laser Alloying of the Surface of Structural Materials?,ibid. (3) (1977) 50.

9. A. V. Belotskii, V. S. Kovalenko, V. I. Volgin andV. I. Pshenichnyi, ?Study of the Possibility of Alloying an Iron Surface with Molybdenum under the Action of Laser Radiation?,Fiz. I. Khim. Obrab. Mater. (3) (1977) 24.

10. V. S. Kovalenko andV. I. Volgin, ?Characteristics of Laser Alloying of an Iron Surface with Vanadium?,ibid. (3) (1978) 28.

11. G. Sepold, Hardening and alloying of steel surfaces by high-power laser beams, in ?Gas-Flow and Chemical Lasers?, edited by J. F. Wendt (Hemisphere, Washington, 1978) pp. 561?9.

12. S. M. Copley, M. Bass, E. W. Van Stryland, D. G. Beck andO. Esquivel, Microstructures of surface alloyed Ag-Cu films produced by laser melt quenching, in ?Rapidly Quenched Metals III?, Vol. 1, edited by B. Cantor (The Metals Society, London, 1979) pp. 147?50.

13. G. Della Mea andP. Massoldi, Redistribution of Cu in polycrystalline and single crystal Al after laser irradiation, in ?Laser-Solid Interactions and Laser Processing, Proceedings of the 1978 Materials Research Society?, edited by S. D. Ferris, H. J. Leamy and J. M. Poate (AIP Conf. Proceed. No. 50, New York, 1979) pp. 212?13.10.1063/1.31661 ↗

14. L. S. Weinman andJ. N. Devault, A microprobe study of rapidly solidified laser surface alloyed low carbon steel,ibid., pp. 239?44.10.1063/1.31666 ↗

15. L. S. Weinman, J. N. Devault andP. Moore, Properties of rapidly solidified, laser surface alloyed, low carbon steels, in ?Applications of Lasers in Materials Processing?, edited by E. A. Metzbower (American Society for Metals, Metals Park, 1979) pp. 245?58.

16. D. S. Gnanamuthu, Laser surface treatment,ibid.in ?, pp. 177?211.

17. I. Ya. Dekhtyar, M. M. Nishchenko, V. V. Bukhalenko andS. Ya. Kharitonskii, ?Mossbauer Effect in Nb-Fe System Synthesized by Laser Irradiation?,Fiz. Met. Metall. 47 (1979) 887.

18. A. Belmondo andM. Castagna, ?Wear Resistant Coatings by Laser Processing?,Thin Solid Films 64 (1979) 249.10.1016/0040-6090(79)90517-0 ↗

19. P. M. Moore andL. S. Weinman, ?Surface Alloying using High-Power Continuous Lasers?,SPIE 198 (1979) 120.10.1117/12.958028 ↗

20. D. S. Gnanamuthu, ?Laser surface treatment?,Opt. Eng. 19 (1980) 783.10.1117/12.7972604 ↗

21. C. W. Draper, C. M. Preece, L. Buene, D. C. Jacobson andJ. M. Poate, Laser alloying of deposited metal films on nickel, in ?Laser and Electron Beam Processing of Materials?, Proceedings of the 1979 Materials Research Society, edited by C. W. White and P. S. Peercy (Academic Press, New York, 1980) pp. 721?7.

22. R. J. Schaefer, T. R. Tucker andJ. D. Ayers, Laser surface melting with carbide particle injection,ibid.in, pp. 754?9.

23. A. K. Jain, V. N. Kulkarni, D. K. Sood, M. Sundararaman andR. D. S. Yadav, ?Laser Induced Surface Alloy Formation and Diffusion of Antimony in Aluminium?,Nucl. Instrum. Methods 168 (1980) 275.10.1016/0029-554X(80)91265-3 ↗

24. A. I. Ushakov, A. M. Gorovoy, V. G. Kazakov andA. G. Il'chuk, ?Alpha to Gamma Phase Transition Induced in Fe-Ni Films by Pulsed Laser Irradiation?,Fiz. Met. Metall. 50 (1980) 440. [English referencePhys. Met. Metall. 50 (1980) 189].

25. J. D. Ayers, T. R. Tucker andR. J. Schaefer, ?Wear resistant surfaces by carbide particle injection?, in Proceedings 2nd International Conference on Rapid Solidification Processing (Claitors, Baton Rouge, 1980) pp. 212?20.

26. K. Takei, S. Fujimori andK. Nagai, ?Rhenium Film Preparation by Laser Melting?,J. Appl. Phys. 51 (1980) 2903.10.1063/1.327960 ↗

27. L. Buene, J. M. Poate, D. C. Jacobson, C. W. Draper andJ. K. Hirvonen, ?Laser Irradiation of Nickel Single Crystals?,Appl. Phys. Lett. 37 (1980) 385.10.1063/1.91952 ↗

28. E. Rimini andJ. E. E. Baglin, ?Pulsed Laser Irradiation of Lead-Implanted Single-Crystal Copper Films?,ibid. 37 (1980) 481.10.1063/1.91738 ↗

29. J. D. Ayers andT. R. Tucker, ?Particulate-TiC-Hardened Steel Surfaces by Laser Melt Injection?,Thin Solid Films 73 (1980) 201.10.1016/0040-6090(80)90352-1 ↗

30. G. Della Mea, L. Donna Dalle Rose, P. Mazzoldi andA. Miotello, ?Laser Irradiation Effects on High Dose Implanted Cu and Pb in Polycrystalline Aluminium?,Rad. Effect 46 (1980) 133.10.1080/00337578008209162 ↗

31. H. W. Bergmann andB. L. Mordike, ?Structure of Laser Melted Steel Surfaces?,Z. Metallk. 71 (1980) 658.

32. P. G. Cappelli, ?Laser Surface Alloying?, in Advisory Group for Aerospace Research and Development, NATA, Lecture Series 106 (March 1980) pp. 6.1?6.13.

33. W. R. Wampler, D. M. Follstaedt andP. S. Peercy, Pulsed laser annealing of aluminium, in ?Laser and Electron-Beam Solid Interactions and Materials Processing?, proceedings of the 1980 Materials Research Society, Vol. 1, edited by J. F. Gibbons, L. D. Hess and T. W. Sigmon (Elsevier, North-Holland, New York, 1981) pp. 567?74.

34. L. Buene, D. C. Jacobson, S. Nakahara, J. M. Poate, C. W. Draper andJ. K. Hivoven, Laser irradiation of nickel: defect structures and surface alloying,ibid., pp. 583?90.

35. P. P. Pronko, H. Wiedersich, K. Seshan, A. L. Helling, T. A. Lograsso andP. M. Baldo, Pulsed laser mixing of Ni-Au surface films on nickel substrates,ibid. pp. 599?606.

36. G. Battaglin, A. Carnera, G. Della Mea, P. Mazzoldi, A. K. Jain, V. N. Kulkarni andD. K. Sood, High power laser effects on unimplanted and implanted aluminium single crystals,ibid. pp. 615?22.

37. L. Buene, E. N. Kaufmann, M. L. Mcdonald, J. Kothaus, R. Vianden, K. Freitag andC. W. Draper, Laser-pulse melting of hafniumimplanted nickel studied with TDPAC and RBS/channeling techniques, in ?Nuclear and Electron Resonance Spectroscopy?, Proceedings of the 1980 Materials Research Society, Vol. 3, edited by E. N. Kaufmann and G. Schenoy (Elsevier, North-Holland, New York, 1981) pp. 391?6.

38. C. W. Draper, L. S. Meyer, D. C. Jacobson, L. Buene andJ. M. Poate, ?Laser Surface Alloying for Passivation of Ti-Pd?,Thin Solid Films 75 (1981) 237.10.1016/0040-6090(81)90401-6 ↗

39. H. W. Bergmann andB. L. Mordike, ?Surface Alloying of Tool Steels with Carbides by Laser or Electron Beam Melting?,Z. Wekstofftech. 12 (1981) 142.10.1002/mawe.19810120407 ↗

40. V. P. Greco, ?Microstructural and Property Changes of Laser-Treated Electrodeposits?,Plating and Surface Finishing 68 (3) (1981) 56.

41. D. C. Jacobson, W. M. Augustyniak, L. Buene, J. M. Poate andC. W. Draper, ?Analysis of Laser Alloyed Surfaces?,IEEE Trans. Nucl. Sci. 28 (1981) 1828.10.1109/TNS.1981.4331531 ↗

42. C. W. Draper, L. S. Meyer, L. Buene, D. C. Jacobson andJ. M. Poate, ?Laser Surface Alloying of Gold Films on Nickel?,Appl. Surf. Sci. 7 (1981) 276.10.1016/0378-5963(81)90114-8 ↗

43. A. K. Jain, V. N. Kulkarni andD. K. Sood, ?Pulsed Laser Heating Calculations Incorporating Vaporization?,Appl. Phys. 25 (1981) 127.10.1007/BF00901284 ↗

44. C. W. Draper, L. Buene, J. M. Poate andD. C. Jacobson, ?Rutherford Backscattering and Marker Diffusion to Determine Melt Threshold in Laser Mirror Damage Studies?,Appl. Opt. 20 (1981) 1730.10.1364/AO.20.001730 ↗

45. J. D. Ayers, in ?Particulate Composite Surfaces by Laser Processing?, edited by K. Mukherjee and J. Mazumder (TMS-AIME, Warrendale, 1981).

46. J. D. Ayers, ?Modification of Metal Surfaces by the Laser Melt/Particle Injection Process?,Thin Solid Films 84 (1981) 323.10.1016/0040-6090(81)90164-4 ↗

47. H. W. Bergmann andB. L. Mordike, ?Laser and Electron-Beam Melted Amorphous Layers?,J. Mater. Sci. 16 (1981) 863.10.1007/BF00542728 ↗

48. P. G. Moore andE. Mccafferty, ?Passivation of Fe/Cr Alloys Prepared by Laser-Surface Alloying?,J. Electrochem. Soc. 128 (1981) 1391.10.1149/1.2127649 ↗

49. A. K. Jain, V. N. Kulkarni andD. K. Sood, ?Laser Treatment of Chromium Films on Aluminium at High Power Densities?,Thin Solid Films 86 (1981) 1.10.1016/0040-6090(81)90152-8 ↗

50. P. L. Antona andA. Bertani, ?Surface treatment of steel by alloying with a high power laser?, in 9th Convegno Nazionale Trattamenti Termici, Assoc. Italiana di Metallurgia, Milano, Italy (1981) pp. 61?4.

51. J. D. Ayers, R. J. Schaefer andW. P. Robey, ?A Laser Processing Technique for Improving the Wear Resistance of Metals?,J. Met. 33 (1981) 19.

52. F. Pleiter andK. G. Prasad, ?Investigation of Laser Irradiated Poly- and Monocrystalline Aluminium by Perturbed Angular Correlation Measurements?,Phys. Lett. 84A (1981) 345.10.1016/0375-9601(81)90779-9 ↗

53. G. Sepold, Surface Finishing with Laser Beams, in ?Proceedings of the International Congress on Surface Technology 1981?, edited by C. Rohrbach (VDI-Verlag GmbH, Dusseldorf, W. Germany, 1981) pp. 323?30.

54. A. K. Jain, V. N. Kulkarni andD. K. Sood, ?A Nuclear Microprobe Analysis of Laser Treated Aluminium Implanted with Antimony?,Nucl. Instrum. Meth. 191 (1981) 151.10.1016/0029-554X(81)90998-8 ↗

55. A. K. Jain, V. N. Kulkarni, K. B. Nambiar, D. K. Sood, S. C. L. Sharma andP. Mazzoldi, ?Pulsed Laser Treatment of Lead Films on Aluminium?,Rad. Effects 63 (1982) 175.10.1080/00337578208222836 ↗

56. A. Miotello andL. F. Dona Dalle Rose, ?New Evidence for the Soret Effect in Pulsed Laser Experiments?,Phys. Lett. 87A (1982) 317.10.1016/0375-9601(82)90707-1 ↗

57. A. K. Jain, V. N. Kulkarni andD. K. Sood, ?Nonequilibrium Segregation During Pulsed Laser Treatment of Antimony Implanted Aluminium?,Rad. Effects 63 (1982) 183.10.1080/00337578208222837 ↗

58. A. Miotello, L. F. Dona Dalle Rose andA. Desalvo, ?Role of Thermal Diffusion in the Redistribution of Cu During Pulsed Laser Irradiating of Cu-planted Al?,Appl. Phys. Lett. 40 (1982) 135.10.1063/1.93014 ↗

59. B. Stritzker, B. R. Appleton, C. W. White andS. S. Lau, ?Superconducting V3Si Produced by Pulsed Laser Annealing?,Solid State Commun. 41 (1982) 321.10.1016/0038-1098(82)90384-2 ↗

60. G. Battaglin, A. Carnera, G. Della Mea, P. Mazzoldi, E. Jannitti, A. K. Jain andD. K. Sood, ?Laser Treatment of a Nonsubstitutional Alloy Cr Implanted in Aluminium?,J. Appl. Phys. 53 (1982) 3224.10.1063/1.331023 ↗

61. Idem, Thermal stability of metastable phases produced by laser treatment of aluminium implanted with chromium and molybdenum, in ?Metastable Materials Formation by Ion Implantation?, Proceedings of the 1981 Materials Research Society, Vol. 7, edited by S. T. Picraux and W. J. Choyke (Elsevier North-Holland, New York, 1982) pp. 327?32.

62. Idem, Pulsed laser treatment of virgin, self and europium implanted nickel: evidence of defect impurity interaction,ibid.in, pp. 333?8.

63. P. S. Peercy, D. M. Follstaedt, S. T. Picraux andW. R. Wampler, Defects and AlSb precipitate nucleation in laser irradiated aluminium, in ?Laser and Electron-Beam Interactions with Solids?, Proceedings of the 1981 Materials Research Society, Vol. 4, edited by B. R. Appleton and G. K. Celler (Elsevier North-Holland, New York, 1982) pp. 401?6.

64. C. W. Draper, D. C. Jacobson, J. M. Gibson, J. M. Poate, J. M. Vandenberg andA. G. Cullis, Laser and ion beam mixing Cr and Ni+Cr films on Cu,ibid.in, pp. 413?18.

65. C. W. Draper, F. J. A. Den Broeder, D. C. Jacobson, E. N. Kaufmann, M. L. Mcdonald andJ. M. Vandenberg, Studies of laser-alloyed Zr-containing surface layers,ibid.in, pp. 419?24.

66. L. F. Dona Dalle Rose andA. Miotello, Interplay of Soret vs. normal impurity diffusion during laser or E-beam induced heat flow transients in metals,ibid.in, pp. 425?30.

67. B. L. Mordike andH. W. Bergmann, Surface alloying of iron alloys by laser beam melting, in ?Rapidly Solidified Amorphous and Crystalline Alloys?, Proceedings of the 1981 Materials Research Society, Vol. 8, edited by B. H. Kear, B. C. Giessen and M. Cohen (Elsevier North-Holland, New York, 1982) pp. 463?83.

68. H. W. Bergmann andB. L. Mordike, Production and properties of amorphous layers on metal substrates by laser and electron beam melting,ibid.in, pp. 497?503.

69. P. A. Molian, P. J. Wang, K. H. Khan andW. E. Wood, Phase transformation studies of laserprocessed Fe-0.2% C-Cr surface alloys,ibid.in, pp. 511?15.

70. Y. Nilsson, Surface melting of cast iron with a high power laser beam,ibid.in, pp. 517?21.

71. D. B. Snow, Microstructure and mechanical properties of laser-processed Ni-Al-Mo based alloys,ibid.in, pp. 523?7.

72. T. R. Tucker, A. H. Clauer, S. L. Ream andC. T. Walters, Rapidly solidified micro structure in surface layers of laser-alloyed Mo on Fe-C substrates,ibid.in, pp. 541?5.

73. T. Chande andJ. Mazumder, ?Mass Transport in Laser Surface Alloying: Iron-Nickel System?,Appl. Phys. Lett. 41 (1982) 42.10.1063/1.93315 ↗

74. U. A. Bykovskii, V. S. Kulikauskas, V. N. Nevolin andI. D. Khabelashivili, ?Obtaining Non-Equilibrium Alloys with the Aid of Monochromatic Radiation?,Zh. Tekh. Fiz. 52 (1982) 61.

75. P. A. Molian, ?Effect of Fusion Zone Shape on the Composition Uniformity of Laser Surface Alloyed Iron?,Scripta Metall. 16 (1982) 65.10.1016/0036-9748(82)90404-5 ↗

76. A. K. Jain, V. N. Kulkarni, K. B. Nambiar, D. K. Sood, S. C. L. Sharma andP. Mazzoldi, ?Pulsed Laser Treatment of Lead Films on Aluminium?,Rad. Effects 63 (1982) 175.10.1080/00337578208222836 ↗

77. C. J. Lin andF. Spaepen, ?Fe-B Glasses Formed by Picosecond Pulsed Laser Quenching?,Appl. Phys. Lett. 41 (1982) 721.10.1063/1.93647 ↗

78. I. B. Borovskii, D. D. Gorodskii, I. M. Sharafeev andS. F. Moryashchev, ?Mass Transfer During Treatment of Metal Surfaces by Fusion Induced by Continuous Laser Radiation?,Sov. Phys. Dokl. 27 (1982) 259.

79. P. A. Molian andW. F. Wood, ?Martensitic Transformation of Laser Processed Fe-5% Ni Alloy?,Scripta Metall. 16 (1982) 1301.10.1016/0036-9748(82)90487-2 ↗

80. Idem, ?Formation of Austenite in Laser-Processed Fe-0.2% C-20% Cr Alloy?,Mater. Sci. Eng. 56 (1982) 271.10.1016/0025-5416(82)90103-3 ↗

81. J. B. Lumsden, D. S. Gnanamuthu andR. J. Moores, Corrosion resistance of AISI 4140 steel laser surface alloyed with Cr and Ni, in ?Corrosion of Metals Processed by Directed Energy Beams?, edited by C. R. Clayton and C. M. Preece (TMS-AIME, New York, 1982) pp. 129?34.

82. Z. L. Wang, J. F. M. Westendorp andF. W. Saris, ?Laser and Ion-Beam Mixing of Cu-Au-Cu and Cu-W-Co Thin Films?,Nucl. Instrum. Meth. 209/210 (1983) 115.10.1016/0167-5087(83)90789-5 ↗

83. E. N. Kaufmann, L. Buene, M. L. Mcdonald, J. Kotthaus, K. Freitag, R. Vianden andC. W. Draper, ?Hf-Implanted Ni Studied with TDPAC and RBS/Channeling Before and After Laser Surface Melting and Thermal Annealing?,ibid. 209/210 (1983) 427.10.1016/0167-5087(83)90834-7 ↗

84. P. A. Molian, ?Structural Characterization of Laser-Processed Molybdenum Steel?,Mater. Sci. Eng. 58 (1983) 175.10.1016/0025-5416(83)90043-5 ↗

85. T. Chande andJ. Mazumder, ?Composition Control in Laser Surface Alloying?,Met. Trans. 14B (1983) 181.10.1007/BF02661015 ↗

86. P. A. Molian andW. E. Wood, ?Transformation Behaviour of Laser Processed Fe-5% Cr, Fe-5% Ni and Fe-6% Cr-2% Ni Alloys?,J. Mater. Sci. 18 (1983) 2555.10.1007/BF00547571 ↗

87. Idem, ?Transformation Structures and Strengthening Mechanisms of Laser Processed Fe-Cr Alloys?ibid. 18 (1983) 2563.10.1007/BF00547572 ↗

88. T. Chande andJ. Mazumder, ?Dimensionless Parameters for Process Control in Laser Surface Alloying?,Opt. Eng. 22 (1983) 362.10.1117/12.7973120 ↗

89. C. -J. Lin andF. Spaepen, Fe-B glasses formed by picosecond pulsed laser quenching, in ?Chemistry and Physics of Rapidly Solidified Materials?, edited by B. J. Berkowitz and R. O. Scattergood (TMS-AIME, New York, 1983) pp. 273?280.

90. B. L. Mordike, H. W. Bergmann andN. Grob, ?Gaseous Alloying with Laser Heating?,Z. Werkstofftech. 14 (1983) 253.10.1002/mawe.19830140803 ↗

91. S. T. Sekula, J. R. Thompson, G. M. Beardsley andD. H. Lowndes, ?Low Temperature Laser Quenching Studies of Superconducting Mo-N and Mo-C Alloys?,J. Appl. Phys. 54 (1983) 6517.10.1063/1.331882 ↗

92. M. E. Gurevich, L. N. Larikov, V. G. Novitskii, A. E. Pogorelov andA. F. Zhuravlev, ?Laser-Stimulated Mass Transfer in Metals?,Phys. Status Solidi 76 (1983) 479.10.1002/pssa.2210760209 ↗

93. P. A. Molian, ?Non-Equilibrium Phases in Laser-Processed Fe-0.2 wt % C-20 wt % Cr Alloys?,Mater. Sci. Eng. 60 (1983) 241.10.1016/0025-5416(83)90007-1 ↗

94. G. Sepold, ?Hardening and Alloying of Steel Surfaces by High-Power Laser Beams?, in Physical Processes in Laser/Materials Interactions, edited by M. Bertolotti (Plenum Press, New York, 1983) pp. 163?73.10.1007/978-1-4684-4322-6_6 ↗

95. R. Brown andJ. D. Ayers, ?Solid Particle Erosion of A16061 with a Laser Melted and TiC Particle Injected Surface Layer?, in Wear of Materials 1983, edited by K. C. Ludema (ASME, New York, 1983) pp. 325?32.

96. R. J. Schaefer andR. Mehrabian, ?Processing/Microstructure Relationships in Surface Melting?, in Laser-Solid Interactions and Transient Thermal Processing of Materials, edited by J. Narayan, W. L. Brown and R. A. Lemons (North-Holland, New York, 1983) pp. 733?44.

97. C. -J. Lin andF. Spaepen, ?Solidification Morphology of Picosecond Pulsed Laser Quenched Fe96B4?,Scripta Metall. 17 (1983) 1259.10.1016/0036-9748(83)90295-8 ↗

98. C. -J. Lin, F. Spaepen andD. Turnbull, ?Picosecond Pulsed Laser-Induced Melting and Glass Formation in Metals?,J. Non-Cryst. Solids 61?62 (1984) 767.10.1016/S0022-3093(84)80002-2 ↗

99. P. A. Molian andW. E. Wood, ?Rapid Solidification of Laser-Processed Chromium Steels?,Mater. Sci. Eng. 62 (1984) 271.10.1016/0025-5416(84)90231-3 ↗

100. G. Battaglin, A. Canera, J. Chaumont, G. Della Mea, L. F. Dona Dalle Rose, A. K. Jain, V. N. Kulkarni, P. Mazzoldi, A. Miotello andD. K. Sood, ?Pulsed laser treatment of Eu and La implanted in Ni: surface alloying, trapping and damage?, in Proceedings of the 1983 European Materials Research Society, Strasbourg, BRD May 1983, to be published.