The effects of quenching on the phase structure of vinylidene fluoride segments in PVDF-HFP copolymer and PVDF-HFP/PMMA blends
Source abstract
Abstract
The phase characteristics of vinylidene fluoride (VDF) segments in vinylidene fluoride (VDF) and hexafluoropropylene (HFP) copolymer (PVDF-HFP) under different quenching temperature were investigated by infrared spectroscopy (FTIR) and X-ray diffraction (XRD) measurements. It was found that the α and β crystalline phases of VDF segments formed in PVDF-HFP as those in pure PVDF. Compared with pure PVDF, HFP segments affected the β phase formation obviously. Increasing of quenching temperature would decrease the fraction of β phase in the quenched PVDF-HFP films, and the films thicker than 8 μm were not in favor of the β phase transformation. Blending PVDF-HFP with small amounts of PMMA (≤10 wt%) yielded great effects on the crystal phase of VDF segments. But higher blending degree of PMMA couldn't increase the formation of β phase further.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Material Properties and Processing · Green IT and Sustainability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. A. J. LOVINGER, in “Development in Crystalline Polymers 1,” edited by D. C. Bassett (Applied Science, London, 1982) p. 225.
2. B. -E. E1 MOHAJIRand N. HEYMANS, Polymer 42 (2001) 5661.10.1016/S0032-3861(01)00064-7 ↗
3. P. SAJKIEWICZ, A. WASIAK and Z. GOCLOWSKI, Eur. Polym. J. 35 (1999) 423.10.1016/S0014-3057(98)00136-0 ↗
4. K. MATSUSHIGE, K. NAGATA and T. TAKEMURA, Polymer 21 (1980) 1391.10.1016/0032-3861(80)90138-X ↗
5. M. BACHMANN, W. L. GORDON, J. Appl. Phys. 51 (1980) 5095.10.1063/1.327425 ↗
6. K. MATSUSHIGE and T. TAKEMURA, J. Polym. Sci. Polym. Phys. Ed. 16 (1978) 921.10.1002/pol.1978.180160516 ↗
7. K. MATSUSHIGE and T. TAKEMURA, J. Cryst. Growth 48 (1980) 343.10.1016/0022-0248(80)90221-3 ↗
8. C. C. HSU and P. H. GEIL, Polym. Comm. 27 (1986) 105.10.1016/0032-3861(86)90363-0 ↗
9. D. C. YANG and Y. CHEN, J. Mater. Sci. Letts. 6 (1987) 599.10.1007/BF01739296 ↗
10. D. C. YANG, Y. CHEN and Z. L. FENG, J. Mater. Sci. 25 (1990) 57.10.1007/BF00544184 ↗
11. T. NISHI and T. T. WANG, Macromolecules 8 (1975) 909.10.1021/ma60048a040 ↗
12. G. D. PATTERSON, T. NISHI andT. T. WANG, ibid. 9 (1976) 60310.1021/ma60052a014 ↗
13. J. H. WENDORFF, J. Polym. Sci., Polym. Lett. Ed. 18 (1980) 439.10.1002/pol.1980.130180607 ↗
14. D. C. DOUGLASS and V. J. MCBRIERTY, Macromolecules 11 (1978) 766.10.1021/ma60064a030 ↗
15. C. LEONARD, J. L. HALARY and L. MONNERIE, Polymer 26 (1985) 1507.10.1016/0032-3861(85)90084-9 ↗
16. A. M. STEPHAN and D. TEETERS, J. Power Sour. 119 (2003) 460.10.1016/S0378-7753(03)00198-8 ↗
17. A. D. PASQUIER, P. C. WARREN, D. CULVER, A. S. GOZDZ, G. G. AMATUCCI and J.-M. TARASCON, Solid State Ionics 135 (2000) 249.10.1016/S0167-2738(00)00371-4 ↗
18. A. S. GOZDZ, C. N. SCHMUTZ and J.-M. TARASCON, US Pat. 5296318 (1994).
19. S. ABBRENTA, J. PLESTILB, D. HLAVATAB, J. LINDGRENA, J. TEGENFELDTA and A. WENDSJO, Polymer 42 (2001) 1407.10.1016/S0032-3861(00)00517-6 ↗
20. S. OSAKI and Y. ISHIDA, J. Polym. Sci., Polym. Phys. Ed. 13 (1975) 107110.1002/pol.1975.180130602 ↗
21. A. SALIMI and A. A. YOUSEFI, Polym. Test. 22 (2003) 699.10.1016/S0142-9418(03)00003-5 ↗
22. YE. BORMASHENKO, R. PORGREB, O. STANEVSKY and ED. BORMASHENKO, ibid. 23 (2004) 791.10.1016/j.polymertesting.2004.04.001 ↗
23. J. C. LI, C. L. WANG, W. L. ZHONG, P. L. ZHANG and Q. H. WANG, Synth. Met. 135–136 (2003) 469.
24. M. BENZ, W. B. EULER and O. J. GREGORY, Macromolecules 35 (2002) 2682.10.1021/ma011744f ↗
25. S. L. HSU, F. J. LU, D. A. WALDMAN and M. MUTHUKUMAR, ibid. 18 (1985) 2583.10.1021/ma00154a038 ↗
26. R. GREGORIO JR. and R. C. CAPITAO, J. Mater. Sci. 35 (2000) 299.10.1023/A:1004737000016 ↗
27. G. T. DAVIS, J. E. MCKINNEY, M. G. BROADHURST and S. C. ROTH, J. Appl. Phys. 49 (1978) 4998.10.1063/1.324446 ↗