journal article·2008-04

Oxidation behavior of Cr2AlC ceramics at 1,100 and 1,250 °C

Wubian Tian, Peiling Wang, Yanmei Kan, Guojun Zhang

Journal of Materials Science· Volume 43· Issue 8
Publisher page

Abstract

The isothermal oxidation behavior of Cr2AlC ceramics oxidized in air at 1,100 and 1,250 °C for 20 h was studied. The phase compositions and microstructure of the oxidized surface were identified and observed by XRD and electron probe microanalysis (EMPA), respectively, while the cross sections of oxidized samples were also examined by EMPA equipped with energy dispersive spectrum capabilities. The results indicated that the oxidation of Cr2AlC samples was carried out by the outward diffusion of Al, together with small amounts of Cr, and the inward diffusion of O to form a surface layer of α-Al2O3, while carbides (Cr7C3 and Cr3C2), rather than oxides (Cr2O3), were formed in a layer under the surface. The mass gain per unit surface area of oxidized Cr2AlC followed a parabolic relation with oxidation time, and the parabolic rates, kp, for oxidation at 1,100 and 1,250 °C were 1.1 × 10−12 and 7.1 × 10−10 kg2 m4 s−1, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Barsoum MW, El-Raghy T (1996) J Am Ceram Soc 79:195310.1111/j.1151-2916.1996.tb08018.x ↗
2. Barsoum MW, Ali M, El-Raghy T (2000) Met Mater Trans 31A:185710.1007/s11661-006-0243-3 ↗
3. Barsoum MW, Golczewski J, Seifert HJ, Aldinger F (2002) J Alloy Compd 340:17310.1016/S0925-8388(02)00107-X ↗
4. Sun ZM, Ahuja R, Li S, Schneider JM (2003) Appl Phys Lett 83:89910.1063/1.1599038 ↗
5. Sun ZM, Li S, Ahuja R, Schneider JM (2004) Solid State Commun 129:58910.1016/j.ssc.2003.12.008 ↗
6. Lofland SE, Hettinger JD, Harrell K, Finkel P (2004) Appl Phys Lett 84:50810.1063/1.1641177 ↗
7. Lin ZJ, Zhou YC, Li MS, Wang JY (2005) Z Metallkd 96:29110.3139/146.101033 ↗
8. Tian WB, Wang PL, Zhang GJ, Kan YM, Li YX, Yan DS (2006) Script Mater 54:84110.1016/j.scriptamat.2005.11.009 ↗
9. Tian WB, Wang PL, Zhang GJ, Kan YM, Li YX (2007) J Am Ceram Soc 90:166310.1111/j.1551-2916.2007.01634.x ↗
10. Tian WB, Wang PL, Zhang GJ, Kan YM, Li YX, Yan DS (2007) Mater Sci Eng A 454–455:13210.1016/j.msea.2006.11.032 ↗
11. Tian WB, Vanmmeensel K, Wang PL, Zhang GJ, Li YX, Vleugels J, Van der Biest O (2007) Mater Lett 61:444210.1016/j.matlet.2007.02.023 ↗
12. Lin ZJ, Li MS, Wang JY, Zhou YC (2007) Acta Mater 55:618210.1016/j.actamat.2007.07.024 ↗
13. Lee DB, Nguyen TD, Han JH, Park SW (2007) Corros Sci 49:392610.1016/j.corsci.2007.03.044 ↗
14. Barsoum MW, El-Raghy T, Ogbuji LUJT (1997) J Electrochem Soc 144:250810.1149/1.1837846 ↗
15. Wang XH, Zhou YC (2003) Corros Sci 45:89110.1016/S0010-938X(02)00177-4 ↗
16. Yang SL, Sun ZM, Hashimoto H, Park YH, Abe T (2003) Oxidat Metal 59:15510.1023/A:1023026201209 ↗
17. Sun ZM, Zhou YC, Li MS (2001) Corros Sci 43:109510.1016/S0010-938X(00)00142-6 ↗
18. Lee DB, Park SW (2006) Mater Sci Eng A 434:14710.1016/j.msea.2006.07.060 ↗
19. Dean JA (1999) Lange’s handbook of chemistry, 15th edn. McGraw-Hill Book Co, New York, p 6.82
20. Dean JA (1999) Lange’s handbook of chemistry, 15th edn. McGraw-Hill Book Co, New York, p 6.90
21. Zhang HB, Zhou YC, Bao YW, Li MS (2004) Acta Mater 52:363110.1016/j.actamat.2004.04.015 ↗