Uniaxial compression tests and the validity of indirect tensile strength
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. R. PELTIER, RILEM Bull. 19 (1954) 29.
2. P. J. F. WRIGHT, Mag. Conc. Res. (London) 7 (20) (1955) 87.10.1680/macr.1955.7.20.87 ↗
3. O. G. INGLES and S. FRYDMAN, Proceedings of the 4th Australia-New Zealand Conference on Soil Mechanics and Foundation Engineering, Adelaide (University of Adelaide, Adelaide 1963) 213–19.
4. P. S. B. COLBACK, Proceedings of the First Congress of the International Society of Rock Mechanics, Lisbon, Vol. 1 (Laboratorie Nacionale de Engenharia Civil, Lisbon, 1966) pp. 385–91.
5. V. RAMAKRISHNAN, Y. ANANTHANARAYANA and K. C. GOPAL, Indian Conc. J. 41 (1967) 202.
6. W. F. CHEN, Amer. Conc. Inst. J. 67 (1970) 993.
7. W. F. CHEN, “Rock and Soils, Limit Analysis and Soil Plasticity” (Elsevier, Amsterdam, 1975) Ch. 11, pp. 501–41.
8. R.-M. BERTHIER, “Revue des Matériaux de Construction et de travaux publics”, no. 431–432, (1951) 241.
9. K. WAITZMANN, Stavebni prumysl 2 (20) (1952) 461 (in Czech.)
10. S. NILSSON, RILEM Bull. 11 (1961) 63.
11. J. D. DAVIES and D. K. BOSE, Proc. J. Amer. Conc. Inst. 65 (1968) 662.
12. S. A. Bortz and H. H. Lund, in “Mechanical Properties of Engineering Ceramics”, edited by W. Kriegel and H. Palmour (Interscience, New York, 1961) Ch. 23, pp. 383–406.
13. J. C. JAEGER and E. R. HOSKINS, Brit. J. Appl. Phys. 17 (1966) 685.10.1088/0508-3443/17/5/316 ↗
14. S. A. BORTZ and T. B. WADE, NTIS Technical Report No. AD658695 (US Army Materials Research Agency, September 1967).
15. J. A. HUDSON, Int. J. Rock Mech. Min. Sci. 6 (1969) 91.10.1016/0148-9062(69)90029-1 ↗
16. K. NEWMAN and L. LACHANCE, Proc. Amer. Soc. Testing Mater. 64 (1964) 1044.
17. L. N. G. FILON, Phil. Trans. Roy. Soc. A 198 (1902) 147.10.1098/rsta.1902.0004 ↗
18. T. GYENGO, J. Amer. Conc. Inst. Proc. 33 (1938) 269.
19. A. SMEKAL, Z. Ver. Deut. Ing. 6 (1938) 159.
20. J. W. MURDOCK and C. E. KESLER, ASTM Bull. (1957) 68.
21. ANON., RILEM Bull. 39 (1957) 81.
22. J. BONZEL, Beton- und Stahlbetonbau 54 (1959) 223, 247.
23. H. HANSEN, K. E. C. NIELSEN, A. KIELLAND and S. THAULOW, RILEM Bull. 17, new series (1962) 23.
24. S. THAULOW, ibid. 17, new series (1962) 31.
25. I. HAWKES and M. MELLOR, Engng. Geol. 4 (1970) 177.10.1016/0013-7952(70)90034-7 ↗
26. C. E. KESLER, ASTM Proc. (1959) 1216.
27. J. VUORINEN, Nordisk Betong 2 (1960) 143.
28. N. TURK and W. R. DEARMAN, Engng. Geol. 22 (1986) 293.10.1016/0013-7952(86)90030-X ↗
29. ANON., J. Amer. Dent. Assoc. 95 (1977) 614. (Addendum ibid. 100 (1980) 246.)10.14219/jada.archive.1977.0123 ↗
30. S. ESPEVIK, Swed. Dent. J. 68 (1975) 181.
31. M. M. A. VRIJHOEF and F. C. M. DRIESSENS, J. Biomech. 4 (1971) 233–238.10.1016/0021-9290(71)90029-7 ↗
32. C. B. HERNÁNDEZ, Publication No. 35, Laboratorio Central de Ensayo de Materials de Construction, Madrid, (1946).
33. C. K. RAMESH and S. K. CHOPRA, Indian Conc. J. 34 (1960) 354.
34. N. B. MITCHELL, Mater. Res. Stand. 1 (1961) 780.
35. J. TUCKER, Amer. Soc. Testing Mater. 45 (1945) 976.
36. S. ESPEVIK, Scand. J. Dent. Res. 83 (1975) 37.
37. L. OBERT, in “Fracture, An Advanced Treatise”, Vol. 7 (Academic, New York, 1972) Ch. 3.
38. M. V. ZAUSTIN, Bull. Amer. Soc. Test. Mater. 266 (1957) 52.
39. W. B. SHOOK, Tech. Doc. Report No. ASD-TDR-63-491 (Aeronautical Systems Division, US Air Force, Ohio, July, 1963).
40. B. LAWN and R. WILSHAW, J. Mater. Sci. 10 (1975) 1049.10.1007/BF00823224 ↗
41. J. W. AXELSON and E. L. PIRET, Ind. Engng. Chem. 42 (1950) 665.10.1021/ie50484a031 ↗
42. A. A. GRIFFITH, Phil. Trans. Roy. Soc. London. A 221 (1921) 163.10.1098/rsta.1921.0006 ↗
43. Idem, Proceedings of the 1st International Congress on Applied Mechanics (1924) pp. 55–63.
44. B. PAUL and M. GANGAL, In “Failure and Breakage of Rock”, edited by C. Fairhurst (SME-AIME, New York, 1967) Ch. 5, pp. 113–41.
45. J. GLUCKLICH, NASA Report TSP71-10158, JPL, Technical Report 32-1438 (California Institute of Technology, Pasadena, 1970).
46. R. EARNSHAW and D. C. SMITH, Austral. Dent. J. 11 (1966) 415.10.1111/j.1834-7819.1966.tb03803.x ↗
47. H. F. GONNERMAN and E. C. SHUMAN, Proc. Amer. Soc. Test. Mater. 28 (II) (1928) 527.
48. P. W. ABELES, I. ALI, E. GRUENWALD, H. RÜSCH, G. VIGERUST and S. THAULOW, J. Amer. Conc. Inst. 29 (1957) 1315.
49. D. McHENRY and J. KARNI, ibid. 29 (1958) 829.
50. K. J. SEEFRIED, H. GESUND and G. PINCUS, J. Mater. 2 (1967) 703.
51. G. P. CHAPMAN, Concrete (London) 2 (1968) 77.
52. H. F. GONNERMAN, Bulletin No. 16 (Structural Research Laboratory, Lewis Institute, Chicago, 1925) pp. 1–18. Reprinted from Proc. Amer. Soc. Test. Mater. 25 (II) (1925).
53. A. M. NEVILLE, Mag. Conc. Res. August (1956) 101.
54. B. BRESLER and K. S. PISTER, J. Amer. Conc. Inst. 30 (1958) 321.
55. O. T. SIGVALDASON, Symposium on Concrete Quality (papers), Cement and Concrete Association, London, November (1964) pp. 162–71.
56. D. H. TROLLOPE and E. T. BROWN, Proceedings of the First International Congress on Rock Mechanics, Lisbon Vol. 1, (Laboratorie Nacional de Engenharia Civil, Lisbon, 1966) 515–19.
57. C. FAIRHURST and N. G. W. COOK, ibid., (Laboratorie Nacional de Engenharia Civil, Lisbon, 1966) Vol. 1, pp. 687–92.
58. P. PANDEY and D. P. SINGH, Engng Geol. 22 (1986) 281.10.1016/0013-7952(86)90029-3 ↗
59. A. NÁDAI, “Plasticity” (McGraw-Hill, New York, 1931) Ch. 17.
60. C. W. FAIRHURST, J. Dent. Res. 39 (1960) 812.10.1177/00220345600390040801 ↗
61. G. WISEMAN, J. LEVY and B. AISENSTEIN, Proceedings of the First International Congress on Rock Mechanics, Lisbon, Vol. 1 (Laboratorie Nacional de Engenharia Civil, Lisbon, 1966) pp. 483–87.
62. G. HONDROS, Austral. J. Appl. Sci. 10 (1959) 243.
63. C. FAIRHURST, Int. J. Rock. Mining Sci. 1 (1964) 535.10.1016/0148-9062(64)90060-9 ↗
64. G. PINCUS and H. GESUND, Mater. Res. Stand. 5 (1965) 454.
65. F. L. L. B. CARNEIRO and A. BARCELLOS, “Résistance á la Traction des bétons” (Instituto Nacional de Technologia, Rio de Janeiro 1949).
66. F. L. L. B. CARNEIRO and A. BARCELLOS, RILEM Bull. 13 (1953) 97.
67. J. BOSSI, ibid. 22 (1964) 9.
68. H. HERTZ, “Gesammelte Werke”, Vol. 1 (Leipzig, 1985) Ch. 15, pp. 283–7.
69. M. MESNAGER, Comt. Rend. Acad. Sci. (1901) 1286.
70. L. LÉCRIVAIN and B. LAMBERT, L’Ind. Céram. 534 (1961) 367.
71. W. F. CHEN, J. Eng. Mech. Div. ASCE Proc. 96 (1970) 341.10.1061/JMCEA3.0001245 ↗
72. T. AKAZAWA, RILEM Bull. 16 (1953) 12.
73. I. LYSE and R. JOHANSEN, ibid. 14, new series (1962) 125.
74. B. R. SEN and A. L. BHARARA, Indian Conc. J. 35 (1961) 85.
75. W. E. GRIEB and G. WERNER, Proc. ASTM 62 (1962) 972.
76. M. M. FROCHT, “Photoelasticity”, Vol. 2 (Wiley, London, 1948) Ch. 4.
77. S. P. TIMOSHENKO and J. N. GOODIER, “Theory of Elasticity”, 3rd Edn (McGraw-Hill, New York, 1970).
78. R. M. SPRIGGS, L. A. BRISSETTE and T. VASILOS, Mater. Res. Stand. 4 (1964) 218.
79. S. W. FREIMAN and L. L. HENCH, J. Amer. Ceram. Soc. 55 (1972) 86.10.1111/j.1151-2916.1972.tb11216.x ↗
80. R. H. MARION and J. K. JOHNSTONE, Ceram. Bull. 56 (1977) 998.
81. P. D. WILLIAMS, MSc thesis, Victoria University of Manchester, UK (1967).
82. M. C. SHAW, P. M. BRAIDEN and G. J. DESALVO, J. Eng. Ind. 97 (1975) 77.10.1115/1.3438594 ↗
83. I. ALI, A. B. LINGAM and K. RAMCHANDER, Indian Conc. J. 30 (1956) 106.
84. R. E. MOORE, PhD thesis, University of Missouri, Rolla, USA (1962).
85. L. L. SIMON, Construct. Rev. (Sydney) August (1956) 23.
86. P. D. WILLIAMS and D. C. SMITH, J. Dent. Res. 50 (1971) 436.10.1177/00220345710500025401 ↗
87. D. J. McNEELY and S. D. LASH, J. Amer. Conc. Inst. Proc. 60 (1963) 751.
88. C. ZELGER, Beton- und Stahlbetonbau 51 (1956) 139.
89. A. RUDNICK, A. R. HUNTER and F. C. HOLDEN, Mater. Res. Stand. April (1963) 283.
90. O. ZIDAN, E. ASMUSSEN and K. D. JØRGENSEN, Scand. J. Dent. Res. 88 (1980) 285.
91. L. EHRNFORD, Acta Odontol. Scand. 39 (1981) 71.10.3109/00016358109162262 ↗
92. A. S. ROGOWSKI, PhD thesis, Iowa State University, USA (1964).
93. W. OLSZAK, S. KAJFASZ and J. PIERTRZYKOWSKI, Conc. Constr. Engng. 9 (1957) 326.
94. L. EHRNFORD, Swed. Dent. J. 4 (1980) 201.
95. R. J. ROARK, “Bodies Under Direct Bearing and Shear Stress, Formulas for Stress and Strain”, 3rd Edn (McGraw-Hill, New York, 1954) Ch. 13.
96. W. J. O’BRIEN and G. RYGE, “An outline of dental materials and their selection” (Saunders, Philadelphia, 1978).
97. H. R. THOMAS and V. A. HOERSCH, Eng. Exp. Sta. Univ. Ill. Bull. 212 (1930) 7.
98. G. WIJK, Int. J. Rock. Mech. Min. Sci. Geomech. Abstr. 15 (1978) 149.10.1016/0148-9062(78)91221-4 ↗
99. R. BERENBAUM and I. BRODIE, J. Inst. Fuel 32 (1959) 320.
100. Idem., Brit. J. Appl. Phys. 10 (1959) 281.10.1088/0508-3443/10/6/307 ↗