Radial microstructural uniformity in inertia friction welded IN718/FGH96 dissimilar joints with post-weld heat treatment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Zhang A, Zhang S, Liu F et al (2019) Effect of cooling rate on phosphorus segregation behavior and the corresponding precipitation of γ″ and γ′ phases in IN718 alloy. J Mater Sci Technol 35:1485–1490. https://doi.org/10.1016/j.jmst.2019.02.00610.1016/j.jmst.2019.02.006 ↗
2. Xie Y, Meng X, Huang Y et al (2019) Deformation-driven metallurgy of graphene nanoplatelets reinforced aluminum composite for the balance between strength and ductility. Compos Part B Eng 177:107413. https://doi.org/10.1016/j.compositesb.2019.10741310.1016/j.compositesb.2019.107413 ↗
3. Lv Q, Wen D, Kong B et al (2025) Effect of welding temperature and time on the solid-state welding behaviors of 1420 Al–Li alloy. J Mater Sci 60:4482–4501. https://doi.org/10.1007/s10853-025-10714-y10.1007/s10853-025-10714-y ↗
4. Jiang W, Lu J, Guan H et al (2023) Study of pre-precipitated δ phase promoting deformation twinning and recrystallization behavior of Inconel 718 superalloy during hot compression. Mater Des 226:111693. https://doi.org/10.1016/j.matdes.2023.11169310.1016/j.matdes.2023.111693 ↗
5. Yang Z, Zhu L, Ning J et al (2022) Revealing the influence of ultrasound / heat treatment on microstructure evolution and tensile failure behavior in 3D-printing of Inconel 718. J Mater Process Technol 305:117574. https://doi.org/10.1016/j.jmatprotec.2022.11757410.1016/j.jmatprotec.2022.117574 ↗
6. Zou T, Liu M, Wang Q et al (2024) Evolutionary mechanisms in the plastic deformation of γ’-Ni3(Al, Ti)-strengthened additively manufactured nickel-based 939 superalloys at intermediate temperatures. Mater Des. https://doi.org/10.1016/j.matdes.2024.11279510.1016/j.matdes.2024.112795 ↗
7. Li Y, Wang J, Han EH et al (2019) Multi-scale study of ductility-dip cracking in nickel-based alloy dissimilar metal weld. J Mater Sci Technol 35:545–559. https://doi.org/10.1016/j.jmst.2018.10.02310.1016/j.jmst.2018.10.023 ↗
8. Meng J, Zhao E, Li X et al (2025) Quantitative evaluation of fatigue cracks on compressor blades using laser ultrasonic technology under high-temperature conditions. NDT E Int 154:103402. https://doi.org/10.1016/j.ndteint.2025.10340210.1016/j.ndteint.2025.103402 ↗
9. Zhao PF, Hou KL, Wang M et al (2025) Effects of sub-solvus ageing on the tensile and creep properties of a new cast nickel-based superalloy. J Mater Sci Technol 212:289–302. https://doi.org/10.1016/j.jmst.2024.06.01410.1016/j.jmst.2024.06.014 ↗
10. Qiao S, Wang Y, Lv L et al (2021) Normal and abnormal grain growth in a FGH96 superalloy during thermomechanical treatment. J Mater Res Technol 15:7033–7049. https://doi.org/10.1016/j.jmrt.2021.11.14210.1016/j.jmrt.2021.11.142 ↗
11. Bano A, Li P, Qin Z, Zhang Z (2024) Hf-doped amorphous fi ller metal brazed joints. 1–9. https://doi.org/10.1177/1362171824130620310.1177/13621718241306203 ↗
12. Li YF, Hong ST, Choi H, Han HN (2019) Solid-state dissimilar joining of stainless steel 316L and Inconel 718 alloys by electrically assisted pressure joining. Mater Charact 154:161–168. https://doi.org/10.1016/j.matchar.2019.06.00510.1016/j.matchar.2019.06.005 ↗
13. Heydari H, Nourbakhsh SH, Zolfaghari M (2025) Impact of the twin boundary on nickel-based superalloy behavior during tensile deformation using molecular dynamics. J Mater Sci 60:5211–5231. https://doi.org/10.1007/s10853-025-10745-510.1007/s10853-025-10745-5 ↗
14. Jiang X, Dong H, Zhang L et al (2025) Materials characterization high-strength GH4169D joint brazed with medium temperature Cu-30Ag-32Zn-1Sn filler metal. Mater Charact 220:114662. https://doi.org/10.1016/j.matchar.2024.11466210.1016/j.matchar.2024.114662 ↗
15. Liu Z, Guo X, Cui H et al (2018) Role of misorientation in fatigue crack growth behavior for NG-TIG welded joint of Ni-based alloy. Mater Sci Eng, A 710:151–163. https://doi.org/10.1016/j.msea.2017.10.09010.1016/j.msea.2017.10.090 ↗
16. Ojo OA, Ding RG, Chaturvedi MC (2006) Heat affected zone microfissuring in a laser beam welded directionally solidified Ni3Al-base alloy. Scr Mater 54:2131–2136. https://doi.org/10.1016/j.scriptamat.2006.02.04410.1016/j.scriptamat.2006.02.044 ↗
17. Han K, Wang H, Shen L, Zhang B (2018) Analysis of cracks in the electron beam welded joint of K465 nickel-base superalloy. Vacuum 157:21–30. https://doi.org/10.1016/j.vacuum.2018.08.01110.1016/j.vacuum.2018.08.011 ↗
18. Li CA, Qin G, Wang H, Geng P (2022) Constitutive modeling and dynamic recrystallization mechanism elaboration of FGH96 with severe hot deformation. J Mater Res Technol 21:2947–2964. https://doi.org/10.1016/j.jmrt.2022.10.10310.1016/j.jmrt.2022.10.103 ↗
19. Wang Y, Ding Z, Li P et al (2025) Compositional gradient induced by heterogeneous domain synergy strategy toward high-performance diffusion bonding. Compos B Eng 297:112330. https://doi.org/10.1016/j.compositesb.2025.11233010.1016/j.compositesb.2025.112330 ↗
20. Chamanfar A, Jahazi M, Gholipour J et al (2012) Suppressed liquation and microcracking in linear friction welded WASPALOY. Mater Des 36:113–122. https://doi.org/10.1016/j.matdes.2011.11.00710.1016/j.matdes.2011.11.007 ↗
21. Zhao W, Liu N, Li Z et al (2025) The adjustability of hot workability of FGH96 superalloy toward the effect of oxygen on the microstructure. Mater Sci Eng, A 929:148103. https://doi.org/10.1016/j.msea.2025.14810310.1016/j.msea.2025.148103 ↗
22. Damodaram R, Ganesh Sundara Raman S, Prasad Rao K (2014) Effect of post-weld heat treatments on microstructure and mechanical properties of friction welded alloy 718 joints. Mater Des 53:954–961. https://doi.org/10.1016/j.matdes.2013.07.09110.1016/j.matdes.2013.07.091 ↗
23. Huang W, Zhang W, Yu Q et al (2024) A promising strategy of multicomponent alloy intermedium for enhancing the mechanical performance of inertia friction welding joints of Inconel 718 alloys. Mater Sci Eng, A 899:146480. https://doi.org/10.1016/j.msea.2024.14648010.1016/j.msea.2024.146480 ↗
24. Fan X, Guo Z, Wang X et al (2018) Morphology evolution of γ′ precipitates in a powder metallurgy Ni-base superalloy. Mater Charact 139:382–389. https://doi.org/10.1016/j.matchar.2018.02.03810.1016/j.matchar.2018.02.038 ↗
25. Wu G, Jiang L, Fu X et al (2025) Effects of post-weld heat treatment on microstructures and tensile properties of K-TIG weld metals of Ni – 12Mo – 7Cr – 2Nb alloy. J Mater Res Technol 36:1658–1671. https://doi.org/10.1016/j.jmrt.2025.03.20410.1016/j.jmrt.2025.03.204 ↗
26. Dong H, Li Y, Li P et al (2019) Inhomogeneous microstructure and mechanical properties of rotary friction welded joints between 5052 aluminum alloy and 304 stainless steel. J Mater Process Technol 272:17–27. https://doi.org/10.1016/j.jmatprotec.2019.04.03910.1016/j.jmatprotec.2019.04.039 ↗
27. Yang T, Zhao L, Wu W et al (2025) Effects of Ti + Al content on the microstructure and mechanical properties of a new nickel-based superalloy fabricated by laser directed energy deposition. J Mater Sci 60:3957–3973. https://doi.org/10.1007/s10853-025-10686-z10.1007/s10853-025-10686-z ↗
28. Cs S, Prabhu TR, Moganraj A et al (2024) Effect of heat treatment on microstructure and high-temperature wear performance of additive manufactured IN718. J Manuf Process 127:683–697. https://doi.org/10.1016/j.jmapro.2024.08.01710.1016/j.jmapro.2024.08.017 ↗
29. Zhang Y, Sun L, Xu X et al (2024) Microstructural evolution and hot tensile deformation behaviors below δ-solvus temperature of IN718 alloy fabricated by plasma arc additive manufacturing. J Mater Res Technol 32:2173–2187. https://doi.org/10.1016/j.jmrt.2024.08.05510.1016/j.jmrt.2024.08.055 ↗
30. Zhang S, Li XL, Zhang JF et al (2023) High cycle fatigue behavior of inertia friction welded joint of FGH96 alloy at high temperature. Int J Fatigue 176:107870. https://doi.org/10.1016/j.ijfatigue.2023.10787010.1016/j.ijfatigue.2023.107870 ↗
31. Li X, Jiang P, Nie M et al (2023) Enhanced strength-ductility synergy of laser additive manufactured stainless steel/Ni-based superalloy dissimilar materials characterized by bionic mechanical interlocking structures. J Mater Res Technol 26:4770–4783. https://doi.org/10.1016/j.jmrt.2023.08.21710.1016/j.jmrt.2023.08.217 ↗
32. Cheng W, Sun Y, Ma R et al (2022) The precipitation behavior effect of δ and γ" phases on mechanical properties of laser powder bed fusion Inconel 718 alloy. Mater Charact 194:112456. https://doi.org/10.1016/j.matchar.2022.11245610.1016/j.matchar.2022.112456 ↗
33. Li J, Zhao Z, Bai P et al (2019) Microstructural evolution and mechanical properties of IN718 alloy fabricated by selective laser melting following different heat treatments. J Alloys Compd 772:861–870. https://doi.org/10.1016/j.jallcom.2018.09.20010.1016/j.jallcom.2018.09.200 ↗
34. Yao X, Liu F, Yang S et al (2021) Effect of cobalt on the precipitation of Laves, γ′ and γ″ phases in a 718 base alloy with 1.2 wt.% Al. J Mater Res Technol 15:4427–4436. https://doi.org/10.1016/j.jmrt.2021.10.06810.1016/j.jmrt.2021.10.068 ↗
35. Zhao P, Li P, Ding Z et al (2025) Microstructural characterization and mechanical properties of inertia friction welded FGH96 joints. Mater Today Commun 42:111194. https://doi.org/10.1016/j.mtcomm.2024.11119410.1016/j.mtcomm.2024.111194 ↗
36. Cao S, Li X, Liu J et al (2023) Effect of post-welding aging treatment on the microstructure and high-temperature properties of inertia friction welded GH4065A joint. Materials. https://doi.org/10.3390/ma1610363910.3390/ma16103639 ↗
37. Pan L, Li P, Hao X et al (2018) Inhomogeneity of microstructure and mechanical properties in radial direction of aluminum/copper friction welded joints. J Mater Process Technol 255:308–318. https://doi.org/10.1016/j.jmatprotec.2017.12.02710.1016/j.jmatprotec.2017.12.027 ↗
38. Peng Z, Zou J, Wang X (2020) Microstructural characterization of dislocation movement during creep in powder metallurgy FGH96 superalloy. Mater Today Commun 25:101361. https://doi.org/10.1016/j.mtcomm.2020.10136110.1016/j.mtcomm.2020.101361 ↗
39. Meng G, Gong Y, Zhang J, Zhao J (2024) Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition. Mater Sci Eng A 898:146396. https://doi.org/10.1016/j.msea.2024.14639610.1016/j.msea.2024.146396 ↗
40. Lin YY, Schleifer F, Fleck M, Glatzel U (2020) On the interaction between γ′′ precipitates and dislocation microstructures in Nb containing single crystal nickel-base alloys. Mater Charact 165:110389. https://doi.org/10.1016/j.matchar.2020.11038910.1016/j.matchar.2020.110389 ↗
41. Ding Z, Li P, Qin Z et al (2024) Strain-mediated defect engineering toward rapid atomic migration in Fe − Al diffusion couples. Nano Lett. https://doi.org/10.1021/acs.nanolett.4c0311510.1021/acs.nanolett.4c03115 ↗
42. Wang J, Wang Y, Qin Z et al (2025) Co element gradient character toward achieving high strength diffusion bonding of FGH98 superalloy at low temperature. J Manuf Process 149:1126–1137. https://doi.org/10.1016/j.jmapro.2025.06.01110.1016/j.jmapro.2025.06.011 ↗
43. Shen Y, Wang L, Li L et al (2025) Microstructure evolution of 2205 duplex stainless steel (DSS) and inconel 718 dissimilar welded joints and impact on corrosion and mechanical behavior. Mater Sci Eng A 929:148136. https://doi.org/10.1016/j.msea.2025.14813610.1016/j.msea.2025.148136 ↗
44. Zhao S, Shao B, Chen H et al (2025) Wetting and interfacial behavior of high entropy alloy filler on rare earth silicate system : phase analysis and first-principles calculations. J Mater Sci Technol 233:223–238. https://doi.org/10.1016/j.jmst.2025.02.02910.1016/j.jmst.2025.02.029 ↗
45. Kumar M, Hemker KJ (1997) Characterization of dislocation structures associated with small-angle boundaries in annealed L12Ni3Ge. Philos Mag Lett 76:399–408. https://doi.org/10.1080/09500839717882310.1080/095008397178823 ↗
46. Hu K, Yi J, Huang B, Wang G (2023) Grain-size effect on dislocation source-limited hardening and ductilization in bulk pure Ni. J Mater Sci Technol 154:9–21. https://doi.org/10.1016/j.jmst.2022.12.04410.1016/j.jmst.2022.12.044 ↗
47. Wang P, Shi W, Gu L et al (2026) Exceptional mechanical properties of dual-phase heterogenous structure in C f / C and superalloy joints via cold spray additive manufacturing-assisted brazing. J Mater Sci Technol 244:46–59. https://doi.org/10.1016/j.jmst.2025.04.03110.1016/j.jmst.2025.04.031 ↗
48. Lin T, Li C, Gao D et al (2024) J Mater Sci Technol 192:228–239. https://doi.org/10.1016/j.jmst.2023.12.04710.1016/j.jmst.2023.12.047 ↗
49. Wang X, Jiang Y, Dong H et al (2024) Unravelling microstructure evolution induced mechanical responses in welded joints of QN1803 steel subjected to varied heat inputs. J Mater Res Technol 33:8854–8867. https://doi.org/10.1016/j.jmrt.2024.11.22410.1016/j.jmrt.2024.11.224 ↗
50. Ren MC, Nie YF, Wang HQ et al (2025) Role of thermal stress-driven dislocation and low-angle grain boundary migration in surface plastic deformation and grain orientation evolution of tungsten under thermal shock. Int J Plast 184:104205. https://doi.org/10.1016/j.ijplas.2024.10420510.1016/j.ijplas.2024.104205 ↗
51. Riedel H, Svoboda J (2016) A model for strain hardening, recovery, recrystallization and grain growth with applications to forming processes of nickel base alloys. Mater Sci Eng A 665:175–183. https://doi.org/10.1016/j.msea.2016.04.01510.1016/j.msea.2016.04.015 ↗
52. Qin Y, Yue S, Sun X et al (2024) Enhancing strength performance of laser welded 7075 aluminum alloy joints with TiC nanoparticle-mixed filler powder. Mater Sci Eng A 915:147285. https://doi.org/10.1016/j.msea.2024.14728510.1016/j.msea.2024.147285 ↗
53. Hong X, Jiang X, Qin Z, et al (2025) A novel sandwich-structured interlayer enabled high-performance GH4169D TLP bonded joint. https://doi.org/10.1177/1362171825139486210.1177/13621718251394862 ↗
54. Qin Z, Zhao B, Wang Y et al (2025) Rotary extrusion induced scraped brazing of powder metallurgy Al-Zn-Mg-Cu alloy. Mater Lett 401:139175. https://doi.org/10.1016/j.matlet.2025.13917510.1016/j.matlet.2025.139175 ↗