DataVXJournal of Materials SciencePaper
journal article·2025-11

The “wetting” of ferrite grain boundaries in Crofer 22H alloy by the Laves phase

Boris Straumal, Valerii Orlov, Olga Kogtenkova, Alexander Straumal, Natalia Tabachkova, Alexei Nekrasov, Bakhtijor Eshov, Sergei Bredikhin, Natalya Demeneva, Sofia Rodionova

Journal of Materials Science· Volume 60· Issue 42
Publisher page
Bibliographic record

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

Metals & alloys

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Kihara S, Newkirk JB, Ohtomo A, Saiga Y (1980) Morphological changes of carbides during creep and their effects on the creep properties of inconel 617 at 1000 °C. Metal Trans A 11:1019. https://doi.org/10.1007/BF0265471610.1007/BF02654716 ↗
2. Sourmail T (2001) Precipitation in creep resistant austenitic stainless steels. Mater Sci Technol 17:1. https://doi.org/10.1179/02670830110150897210.1179/026708301101508972 ↗
3. Ennis PJ, Quadakkers WJ, Schuster H (1993) The effect of selective oxidation of chromium on the creep strength of alloy 617. J Phys IV 3:979. https://doi.org/10.1051/jp4:1993910110.1051/jp4:19939101 ↗
4. Young DJ, Gleeson B (2002) Alloy phase transformations driven by high temperature corrosion processes. Corr Sci 44:345. https://doi.org/10.1016/S0010-938X(01)00065-810.1016/S0010-938X(01)00065-8 ↗
5. Naumenko D, Shemet V, Singheiser L, Quadakkers WJ (2009) Failure mechanisms of thermal barrier coatings on MCrAlY-type bondcoats associated with the formation of thermally grown oxides. J Mater Sci 44:1687. https://doi.org/10.1007/s10853-009-3284-310.1007/s10853-009-3284-3 ↗
6. Sloof WG, Nijdam TJ (2009) On the high-temperature oxidation of MCrAlY coatings. Int J Mater Res 100:1318. https://doi.org/10.3139/146.11020110.3139/146.110201 ↗
7. Stein F, Palm A, Sauthoff G (2005) Structure and stability of Laves phases part II—structure type variations in binary and ternary systems. Intermet 13:1056. https://doi.org/10.1016/j.intermet.2004.11.00110.1016/j.intermet.2004.11.001 ↗
8. Froitzheim J, Meier GH, Niewolak L, Ennis P, Hattendorf H, Singheiser L, Quadakkers WJ (2008) Development of high strength ferritic steel for interconnect application in SOFCs. J Power Sour 178:163. https://doi.org/10.1016/j.jpowsour.2007.12.02810.1016/j.jpowsour.2007.12.028 ↗
9. Quadakkers J, Niewolak L, Ennis P (2006) Patent Numbers: PCT/DE2007/000166, WO2007093148-A1; DE102006007598-A1
10. Palcut M, Mikkelsen L, Neufeld K, Chen M, Knibbe R, Hendriksen PV (2010) Corrosion stability of ferritic stainless steels for solid oxide electrolyser cell interconnects. Corr Sci 52:3309. https://doi.org/10.1016/j.corsci.2010.06.00610.1016/j.corsci.2010.06.006 ↗
11. Sachitanand R, Sattari M, Svensson J-E, Froitzheim J (2013) Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects. Int J Hydr Energy 38:15328. https://doi.org/10.1016/j.ijhydene.2013.09.04410.1016/j.ijhydene.2013.09.044 ↗
12. Asensio C, Chyrkin A, Niewolak L, Konoval V, Hattendorf H, Kuhn B, Singheiser L, Quadakkers WJ (2011) Subsurface depletion and enrichment processes during oxidation of a high chromium, Laves-phase strengthened ferritic steel. Electrochem Solid-State Lett 14:P17. https://doi.org/10.1149/1.359025810.1149/1.3590258 ↗
13. Garcia-Fresnillo L, Shemet V, Chyrkin A, de Haart LGJ, Quadakkers WJ (2014) Long-term behaviour of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800 °C. J Power Sour 271:213. https://doi.org/10.1016/j.jpowsour.2014.07.18910.1016/j.jpowsour.2014.07.189 ↗
14. Zhang W, Yan D, Yang J, Chen J, Chi B, Pu J, Li J (2014) A novel low Cr-containing Fe–Cr–Co alloy for metallic interconnects in planar intermediate temperature solid oxide fuel cells. J Power Sour 271:25. https://doi.org/10.1016/j.jpowsour.2014.07.17010.1016/j.jpowsour.2014.07.170 ↗
15. Harthøj A, Holt T, Møller P (2015) Oxidation behaviour and electrical properties of cobalt/cerium oxide composite coatings for solid oxide fuel cell interconnects. J Power Sour 281:227. https://doi.org/10.1016/j.jpowsour.2015.01.12810.1016/j.jpowsour.2015.01.128 ↗
16. Blinn B, Görzen D, Fischer T, Kuhn B, Beck T (2020) Analysis of the thermomechanical fatigue behavior of fully ferritic high chromium steel Crofer®22 H with cyclic indentation testing. Appl Sci 10:6461. https://doi.org/10.3390/app1018646110.3390/app10186461 ↗
17. Si X, Li C, Bo Y, Qi J, Feng J, Cao J (2020) The role of Al diffusion behavior in the process of forming a super-reliable Al2O3 protective layer during reactive air aluminization. Appl Surf Sci 518:146242. https://doi.org/10.1016/j.apsusc.2020.14624210.1016/j.apsusc.2020.146242 ↗
18. Fischer T, Kuhn B (2022) Active crack obstruction mechanisms in Crofer® 22H at 650 °C. Materials 15:6280. https://doi.org/10.3390/ma1518628010.3390/ma15186280 ↗
19. Li C (2010) Influence of the thermomechanical treatment history on a laves-phase hardened ferritic steel. Master Thesis, Forschungszentrum Juelich GmbH, Jülich, Germany, FZJ-2022-03223. https://juser.fz-juelich.de/record/909534/files/Influence%20of%20the%20thermochemical%20-%20li.pdf (open access)
20. Huang L, Shiue R, Liu C (2023) Microstructural evolution and gas-tight properties of yttria-stabilized zirconia/Crofer 22H stainless steel brazed joints with the Ag-Ge-Si filler for use in solid-oxide fuel cells. Metals 13:1866. https://doi.org/10.3390/met1311186610.3390/met13111866 ↗
21. Demeneva NV, Matveev DV, Kharton VV, Bredikhinn SI (2016) Regularities of high-temperature oxidation of current collectors of solid oxide fuel cells due to diffusion processes in subsurface regions. Russ J Electrochem 52:678. https://doi.org/10.1134/S1023193516070065[10.1134/S1023193516070065[ ↗
22. Agarkova EA, Matveev DV, Fedotov YuS, Ivanov AI, Agarkov DA, Bredikhin SI (2022) Processing of manganite-based contact layers for stacking of planar solid oxide fuel cells. Mater Lett 309:131462. https://doi.org/10.1016/j.matlet.2021.13146210.1016/j.matlet.2021.131462 ↗
23. Beck T, Kuhn B, Eckardt T, Singheiser L (2016) Microstructure, creep and thermomechanical fatigue of novel solid solution and Laves phase strengthened Cr2O3 and Al2O3 forming ferrites for car engine exhaust and heat exchangern systems. Trans Ind Inst Met 69:379. https://doi.org/10.1007/s12666-015-0747-x10.1007/s12666-015-0747-x ↗
24. Talic B, Venkatachalam V, Hendriksen PV, Kiebach R (2020) Comparison of MnCo2O4 coated Crofer 22 H, 441, 430 as interconnects for intermediate-temperature solid oxide fuel cell stacks. J Alloys Compd 821:153229. https://doi.org/10.1016/j.jallcom.2019.15322910.1016/j.jallcom.2019.153229 ↗
25. Huang L-W, Wu YY, Shiue R-K (2021) The effect of oxygen pressure in active brazing 8YSZ and Crofer 22H alloy. J Mater Res Technol 10:1382. https://doi.org/10.1016/j.jmrt.2021.01.00410.1016/j.jmrt.2021.01.004 ↗
26. Tong W, Wang W, Leng X, Song J (2024) Influences of composite electrodeposition parameters on the properties of Ni-doped Co-Mn composite spinel coatings. Materials 17:1200. https://doi.org/10.3390/ma1705120010.3390/ma17051200 ↗
27. Talic B, Falk-Windisch H, Venkatachalam V, Hendriksen PV, Wiik K, Lein HL (2017) Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects. J Power Sour 354:57. https://doi.org/10.1016/j.jpowsour.2017.04.02310.1016/j.jpowsour.2017.04.023 ↗
28. Pascual MJ, Guillet A, Durán A (2007) Optimization of glass–ceramic sealant compositions in the system MgO–BaO–SiO2 for solid oxide fuel cells (SOFC). J Power Sour 169:40. https://doi.org/10.1016/j.jpowsour.2007.01.04010.1016/j.jpowsour.2007.01.040 ↗
29. Falk-Windisch H, Svensson JE, Froitzheim J (2015) The effect of temperature on chromium vaporization and oxide scale growth on interconnect steels for Solid Oxide Fuel Cells. J Power Sour 287:25. https://doi.org/10.1016/j.jpowsour.2015.04.04010.1016/j.jpowsour.2015.04.040 ↗
30. Straumal B, Lepkova T, Korneva A, Gerstein G, Kogtenkova O, Gornakova A (2023) Grain boundary wetting by the second solid phase: 20 years of history. Metals 13:929. https://doi.org/10.3390/met1305092910.3390/met13050929 ↗
31. Straumal B, Gust W, Watanabe T (1999) Tie lines of the grain boundary wetting phase transition in the Zn-rich part of the Zn–Sn phase diagram. Mater Sci Forum 294–296:411–414. https://doi.org/10.4028/www.scientific.net/MSF.294-296.41110.4028/www.scientific.net/MSF.294-296.411 ↗
32. Straumal B, Muschik T, Gust W, Predel B (1992) The wetting transition in high and low energy grain boundaries in the Cu(In) system. Acta Metall Mater 40:939–945. https://doi.org/10.1016/0956-7151(92)90070-U10.1016/0956-7151(92)90070-U ↗
33. Straumal B, Molodov D, Gust W (1995) Wetting transition on the grain boundaries in Al contacting with Sn-rich melt. Interface Sci 3:127–132. https://doi.org/10.1007/BF0020701410.1007/BF00207014 ↗
34. López GA, Mittemeijer EJ, Straumal BB (2004) Grain boundary wetting by a solid phase; microstructural development in a Zn–5 wt.% Al alloy. Acta Mater 52:4537–4545. https://doi.org/10.1016/j.actamat.2004.06.01110.1016/j.actamat.2004.06.011 ↗
35. Straumal BB, Baretzky B, Kogtenkova OA, Straumal AB, Sidorenko AS (2010) Wetting of grain boundaries in Al by the solid Al3Mg2 phase. J Mater Sci 45:2057–2061. https://doi.org/10.1007/s10853-009-4014-610.1007/s10853-009-4014-6 ↗
36. Protasova SG, Kogtenkova OA, Straumal BB, Zięba P, Baretzky B (2011) Inversed solid-phase grain boundary wetting in the Al–Zn system. J Mater Sci 46:4349–4353. https://doi.org/10.1007/s10853-011-5322-110.1007/s10853-011-5322-1 ↗
37. Straumal BB, Gornakova AS, Prokofjev SI, Afonikova NS, Baretzky B, Nekrasov AN, Kolesnikova KI (2014) Continuous and discontinuous αTi layers between grains of β(Ti, Co) phase. J Mater Eng Perform 23:1580–1584. https://doi.org/10.1007/s11665-013-0789-310.1007/s11665-013-0789-3 ↗
38. Gornakova AS, Prokofiev SI, Kolesnikova KI, Straumal BB (2016) Formation regularities of grain boundary interlayers of the α-Ti phase in binary titanium alloys. Russ J Non-Ferr Met 57:229–235. https://doi.org/10.3103/S106782121603007X10.3103/S106782121603007X ↗
39. Straumal BB, Kogtenkova OA, Straumal AB, Kuchyeyev YuO, Baretzky B (2010) Contact angles by the solid-phase grain boundary wetting in the Co–Cu system. J Mater Sci 45:4271–4275. https://doi.org/10.1007/s10853-010-4377-810.1007/s10853-010-4377-8 ↗
40. Straumal BB, Kogtenkova OA, Kolesnikova KI, Straumal AB, Bulatov MF, Nekrasov AN (2014) Reversible “wetting” of grain boundaries by the second solid phase in the Cu–In system. JETP Lett 100:535–539. https://doi.org/10.1134/S002136401420010710.1134/S0021364014200107 ↗
41. Ke B, Ye LY, Zhang Y, Liu XD, Dong Y, Wang P, Tang JG, Liu SD (2021) Enhanced strength and electrical conductivities of an Al–Zn–Mg aluminum alloy through a new aging process. Mater Lett 304:30586. https://doi.org/10.1016/j.matlet.2021.13058610.1016/j.matlet.2021.130586 ↗
42. Gao T, Liu LY, Liu SS, Yuan CH, Bian YH, Liu XF (2021) The growth behavior of Al2Cu phase in confined spaces constituted by gamma-Al2O3 particle clusters. Mater Lett 304:130711. https://doi.org/10.1016/j.matlet.2021.13071110.1016/j.matlet.2021.130711 ↗
43. Pouraliakbar H, Beygi R, Fallah V, Monazzah AH, Jandaghi MR, Khalaj G, da Silva LFM, Pavese M (2022) Processing of Al-Cu-Mg alloy by FSSP: Parametric analysis and the effect of cooling environment on microstructure evolution. Mater Lett 308:131157. https://doi.org/10.1016/j.matlet.2021.13115710.1016/j.matlet.2021.131157 ↗
44. Yu X, Chen SY, Gu F, Zhang ZY, Sun JB, Cui CX (2022) Preparation of Alnico magnet with high magnetization by thermal deformation. Mater Lett 310:131503. https://doi.org/10.1016/j.matlet.2021.13150310.1016/j.matlet.2021.131503 ↗
45. Wang G, Gu Z, Yu G (2022) Precipitates evolution of the AA7075-H18 alloy sheet during the application of the solution heat treatment process. Mater Lett 318:132230. https://doi.org/10.1016/j.matlet.2022.13223010.1016/j.matlet.2022.132230 ↗
46. Que Z, Wang Y, Fan Z, Hashimoto T, Zho X (2022) Enhanced heterogeneous nucleation of Al6(Fe, Mn) compound in Al alloys by interfacial segregation of Mn on TiB2 particles surface. Mater Lett 323:132570. https://doi.org/10.1016/j.matlet.2022.13257010.1016/j.matlet.2022.132570 ↗
47. Wang S, Xue C, Yang X, Tian G, Wang J (2023) Heterogeneous nucleation of T1 precipitates in solid solution of Al–Cu–Li alloys from Ag-rich structures: an ab initio study. Scripta Mater 225:115191. https://doi.org/10.1016/j.scriptamat.2022.11519110.1016/j.scriptamat.2022.115191 ↗
48. Wang S, Zhang C, Li X, Wang J (2021) Uncovering the influence of Cu on the thickening and strength of the d0/h0/d0 nano-composite precipitate in Al–Cu–Li alloys. J Mater Sci 56:10092–10107. https://doi.org/10.1007/s10853-021-05894-210.1007/s10853-021-05894-2 ↗
49. Kanetas PJP, Calvo J, Rodriguez-Calvillo P, Marrero JMC, Antunano MAZ, Guerrero-Mata MP (2020) EBSD study of delta-processed Ni-based superalloy. Metals 10:1466. https://doi.org/10.3390/met1011146610.3390/met10111466 ↗
50. Yan DC, Qiu NS, Zuo XW (2021) On the Cr-rich continuous and discontinuous precipitation kinetics in Ni–Cr alloys by microstructural characterization and differential scanning calorimetry analysis. Mater Lett 296:129887. https://doi.org/10.1016/j.matlet.2021.12988710.1016/j.matlet.2021.129887 ↗
51. Wu Y, Li YT, Xu YT, Kang MD, Wang J, Sun BD (2021) Unveiling the precipitation-induced high-temperature oxidation behavior in a Ni–Al–Y alloy. Mater Lett 297:129977. https://doi.org/10.1016/j.matlet.2021.12997710.1016/j.matlet.2021.129977 ↗
52. Tong YX, Liu JX, Sun SB, Chen F, Zarinejad M (2022) Unusual precipitation and its hardness enhancement in Fe-alloyed 60NiTi alloy. Mater Lett 329:133170. https://doi.org/10.1016/j.matlet.2022.13317010.1016/j.matlet.2022.133170 ↗
53. Babalola BJ, Ayodele OO, Awotunde MA, Akinwamide SO, Olubambi PA (2021) Microstructure and mechanical properties of Ni-17Cr-xCo ternary alloys fabricated via field-assisted sintering. Mater Lett 302:130404. https://doi.org/10.1016/j.matlet.2021.13040410.1016/j.matlet.2021.130404 ↗
54. Quintana-Nedelcos A, Anis M, Osman R, Yang J, Leong Z, Azakli Y, Morley NA (2022) On the structural, microstructural and magnetic properties evolution of Ni0.5FeCoAlCrx alloys. Mater Lett 311:131542. https://doi.org/10.1016/j.matlet.2021.13154210.1016/j.matlet.2021.131542 ↗
55. Liang SL, Wang YH, Wang H, Wang J, Jiang SH (2023) Achieving improved strength and ductility through multi-pass cold deformation and annealing of a Cu–Zn–Bi alloy. Mater Lett 330:133373. https://doi.org/10.1016/j.matlet.2022.13337310.1016/j.matlet.2022.133373 ↗
56. Sun Y, Song C, Zhang Y, Li M, Zhang Y (2021) Oxidation on the current-carrying rolling surface and its subsequent impact on the damage of Cu contact pairs in O2/N2 mixture. Mater Lett 288:129349. https://doi.org/10.1016/j.matlet.2021.12934910.1016/j.matlet.2021.129349 ↗
57. Nie Q, Wang B, Zhang J, Tang W (2022) Fabrication of the Ag-coated Invar/Cu bimetal matrix composites through spark plasma sintering: an investigation on microstructure and properties. Mater Lett 321:132440. https://doi.org/10.1016/j.matlet.2022.13244010.1016/j.matlet.2022.132440 ↗
58. Straumal BB, Gornakova AS, Kucheev YO, Baretzky B, Nekrasov AN (2012) Grain boundary wetting by a second solid phase in the Zr–Nb alloys. J Mater Eng Perform 21:721–724. https://doi.org/10.1007/s11665-012-0158-710.1007/s11665-012-0158-7 ↗
59. Huang GY, Zhang GS, Song P, Liu XM, Lv X, Li M, Zhang JH, Deng WK, Guo DF (2022) Tailoring pre-deformation microstructure-An easy way for nanocrystallization. Mater Lett 308:131143. https://doi.org/10.1016/j.matlet.2021.13114310.1016/j.matlet.2021.131143 ↗
60. Cheng F, Wang HM, Yang JW, Li Z, Cheng X, Tian XJ (2023) Deformation kinking in duplex titanium alloy with widmannstatten laths under high strain rates. Mater Lett 333:133591. https://doi.org/10.1016/j.matlet.2022.13359110.1016/j.matlet.2022.133591 ↗
61. Gornakova AS, Straumal BB, Nekrasov AN, Kilmametov A, Afonikova NS (2018) Grain boundary wetting by a second solid phase in Ti–Fe alloys. J Mater Eng Perform 27:4989–4992. https://doi.org/10.1007/s11665-018-3300-310.1007/s11665-018-3300-3 ↗
62. Xiao C, Zhang H, Davoodi D, Miri R, Tayebi M (2022) Microstructure evolutions of Ti–Al–Nb alloys with different Ta addition, produced by mechanical alloying and spark plasma sintering. Mater Lett 323:132568. https://doi.org/10.1016/j.matlet.2022.13256810.1016/j.matlet.2022.132568 ↗
63. Tang H, Liu Y, Zhao D, Song M (2022) Achieving high strength and large ductility via Zr-rich stripes in Ti-15Zr alloy. Mater Lett 318:132194. https://doi.org/10.1016/j.matlet.2022.13219410.1016/j.matlet.2022.132194 ↗
64. Lin T, Song K, Shao H, Lu H (2022) Effect of Nb content on Ti-Mo-Nb alloy materials for neutron high pressure diffraction. Mater Lett 314:131821. https://doi.org/10.1016/j.matlet.2022.13182110.1016/j.matlet.2022.131821 ↗
65. Su G, Yun Z, Lin YC, He DG, Zhang S, Chen ZJ (2021) Microstructure evolution and a unified constitutive model of Ti-55511 alloy compressed at stepped strain rates. Materials 14:6750. https://doi.org/10.3390/ma1422675010.3390/ma14226750 ↗
66. Bazhina AD, Bazhin PM, Chizhikov AP, Konstantinov S, Stolin AM (2021) Influence of high-temperature annealing on structure of titanium aluminide materials obtained by combustion and high-temperature shear deformation. Intermet 139:107313. https://doi.org/10.1016/j.intermet.2021.10731310.1016/j.intermet.2021.107313 ↗
67. Straumal AB, Mazilkin IA, Tsoi KV, Baretzky B, Straumal BB (2020) “Wetting” phase transitions by the second solid phase for linear defects (grain boundary triple junctions). JETP Lett 112:257–261. https://doi.org/10.1134/S002136402016003110.1134/S0021364020160031 ↗
68. Chang LL, Su XJ, Qin JL (2022) Uneven microstructure in ZK60 alloy as a core of AZ31/ZK60 composite rods. Mater Lett 325:132666. https://doi.org/10.1016/j.matlet.2022.13266610.1016/j.matlet.2022.132666 ↗
69. Zhang S, Sun B, Wu RZ, Zhou Y, Wu Q (2022) Nanocrystalline strengthened Mg-Li alloy with a bcc structure prepared via heat treatment and rolling. Mater Lett 312:131680. https://doi.org/10.1016/j.matlet.2022.13168010.1016/j.matlet.2022.131680 ↗
70. Straumal A, Mazilkin I, Tzoy K, Straumal B, Bryła K, Baranchikov A, Eggeler G (2020) Bulk and surface low temperature phase transitions in the Mg-alloy EZ33A. Metals 10:1127. https://doi.org/10.3390/met1009112710.3390/met10091127 ↗
71. Xiao N, Zeng YZ, Lu XL, Sun YH, Sun BZ (2021) On the gamma ’ and W strengthening precipitates in Dy and Zn microalloyed magnesium alloys. Mater Lett 307:131028. https://doi.org/10.1016/j.matlet.2021.13102810.1016/j.matlet.2021.131028 ↗
72. Zhou TS, Guo FF, Zhang QF, Liu DX (2021) Offsetting strength-ductility tradeoff in Mg-Sn-Zn-Zr alloy by a novel differential-thermal ECAP process. Mater Lett 305:130764. https://doi.org/10.1016/j.matlet.2021.13076410.1016/j.matlet.2021.130764 ↗
73. Straumal B, Tsoy K, Druzhinin A, Orlov V, Khrapova N, Davdian G, Gerstein G, Straumal A (2023) Coexistence of intermetallic complexions and bulk particles in grain boundaries in the ZEK100 alloy. Metals 13:1407. https://doi.org/10.3390/met1308140710.3390/met13081407 ↗
74. Dong NN, Sun LX, Ma HB, Jin PP (2021) Effects of cryogenic treatment on microstructures and mechanical properties of Mg-2Nd-4Zn alloy. Mater Lett 305:130699. https://doi.org/10.1016/j.matlet.2021.13069910.1016/j.matlet.2021.130699 ↗
75. Straumal B, Khrapova N, Druzhinin A, Tsoy K, Davdian G, Orlov V, Gerstein G, Straumal A (2023) Grain boundary wetting transition in the Mg-based ZEK 100 alloy. Crystals 13:1538. https://doi.org/10.3390/cryst1311153810.3390/cryst13111538 ↗
76. Guo HY, Liu SH, Huang L, Wang DQ, Du Y, Chu MQ (2021) Thermal conductivity of as-cast and annealed Mg-RE binary alloys. Metals 11:554. https://doi.org/10.3390/met1104055410.3390/met11040554 ↗
77. Astafurova E, Melnikov E, Astafurov S, Reunova K, Panchenko M, Moskvina V, Tumbusova I (2021) A comparative study of a solid solution hardening in carbon-alloyed FeMnCrNiCo0.95C0.05 high-entropy alloy subjected to different thermal–mechanical treatments. Mater Lett 285:129073. https://doi.org/10.1016/j.matlet.2020.12907310.1016/j.matlet.2020.129073 ↗
78. Yen S, Liu Y, Chu S, Chang C, Lin S, Tsai M-H (2022) B2-strengthened Al-Co-Cr-Fe-Ni high entropy alloy with high ductility. Mater Lett 325:132828. https://doi.org/10.1016/j.matlet.2022.13282810.1016/j.matlet.2022.132828 ↗
79. Straumal BB, Korneva A, Lopez GA, Kuzmin A, Rabkin E, Gerstein G, Straumal AB, Gornakova AS (2021) Grain boundary wetting by a second solid phase in the high entropy alloys: a review. Materials 14:7506. https://doi.org/10.3390/10.3390/ma1424750610.3390/10.3390/ma14247506 ↗
80. Shen QK, Kong XD, Chen XZ, Yao XK, Deev VB, Prusov ES (2021) Powder plasma arc additive manufactured CoCrFeNi(SiC)(x) high-entropy alloys: Microstructure and mechanical properties. Mater Lett 282:128736. https://doi.org/10.1016/j.matlet.2020.12873610.1016/j.matlet.2020.128736 ↗
81. Zhu XP, Gao N, Bai ZC, Wang K, Yao JQ, Fan ZT, Wang ZD, Liu XW (2022) Phase stability of a light-weight AlNb2TiV refractory high-entropy alloy at high temperature. Mater Lett 325:132897. https://doi.org/10.1016/j.matlet.2022.13289710.1016/j.matlet.2022.132897 ↗
82. Straumal BB, Korneva A, Kuzmin A, Lopez G, Rabkin E, Straumal AB, Gerstein G, Gornakova AS (2021) The grain boundary wetting phenomena in the Ti-containing high entropy alloys: a review. Metals 11:1881. https://doi.org/10.3390/met1111188110.3390/met11111881 ↗
83. Zhou Y, Kang J, Zhang J, Fu Z, Zhu L, She D (2022) Effect of vacuum heat treatment on microstructure and mechanical properties of HVOF sprayed AlCoCrFeNiCu high-entropy alloy coating. Mater Lett 323:132551. https://doi.org/10.1016/j.matlet.2022.13255110.1016/j.matlet.2022.132551 ↗
84. Straumal B, Rabkin E, Lopez GA, Korneva A, Kuzmin A, Gornakova AS, Valiev RZ, Straumal A, Baretzky B (2021) Grain boundary wetting phenomena in the high entropy alloys containing nitrides, carbides, borides, silicides, and hydrogen: a review. Crystals 11:1540. https://doi.org/10.3390/cryst1112154010.3390/cryst11121540 ↗
85. Deng N, Wang J, Wang JX, He YX, Beaugnon E, Li JS (2021) Effect of high magnetic field assisted heat treatment on microstructure and properties of AlCoCrCuFeNi high-entropy alloy. Mater Lett 303:130540. https://doi.org/10.1016/j.matlet.2021.13054010.1016/j.matlet.2021.130540 ↗
86. Sekhar RA, Shifin S, Kumar AA, Nair AH, Sudhees A, Krishnan J (2021) AlCoCrFeNiTi-C alloy with TiC nano precipitates processed through mechanical alloying and spark plasma sintering. Mater Lett 285:129185. https://doi.org/10.1016/j.matlet.2020.12918510.1016/j.matlet.2020.129185 ↗
87. Wadsworth J, Sherby OD (1980) On the bulat - Damascus steels revisited. Progr Mater Sci 25:35–68. https://doi.org/10.1016/0079-6425(80)90014-610.1016/0079-6425(80)90014-6 ↗
88. Sukhanov DA, Arkhangel’skii LB (2016) Damascus steel microstructure. Metallurgist 59:818–822. https://doi.org/10.1007/s11015-016-0178-x10.1007/s11015-016-0178-x ↗
89. Sukhanov DA, Plotnikova NV (2020) Mechanical properties of XVIII century Persian bulat steel compared with modern tool steels. Metallurgist 63:1192–1203. https://doi.org/10.1007/s11015-020-00942-910.1007/s11015-020-00942-9 ↗
90. Sukhanov DA (2023) Features of morphology of carbide banding of high-carbon steels with bulat structure. Metallurgist 67:111–122. https://doi.org/10.1007/s11015-023-01498-010.1007/s11015-023-01498-0 ↗
91. Efron LI, Stepanov PP, Zharkov SV, Chastukhin AV (2022) Investigation of low carbon pipeline steel weldability by welding thermal cycle simulation. Metallurgist 66:909–921. https://doi.org/10.1007/s11015-022-01403-110.1007/s11015-022-01403-1 ↗
92. Zharkov SV, Stepanov PP, Chastuhin AV, Bagmet OA, Efron LI (2023) Features (research) of the effect of microstructure on large diameter pipe welded joint impact strength. Metallurgist 66:1027–1039. https://doi.org/10.1007/s11015-023-01416-410.1007/s11015-023-01416-4 ↗
93. Kantor MM, Vorkachev KG, Stepanov PP, Zharkov SV, Efron LI, Bozhenov VA (2023) Impact toughness and microstructure of low-alloy steel weld produced by automatic submerged arc welding. Metallurgist 67:717–731. https://doi.org/10.1007/S11015-023-01561-W10.1007/S11015-023-01561-W ↗
94. Velikodnev VY, Stepanov PP, Nastich SYu, Éfron LI, Shabalov IP, Bystrov ÉA (2020) Effect of structural state of metal in weld fusion zone of large-diameter pipes on fracture mechanism and results of crack-resistance (CTOD) tests. Metallurgist 63:1054–1070. https://doi.org/10.1007/s11015-020-00924-x10.1007/s11015-020-00924-x ↗
95. Vorkachev KG, Stepanov PP, Éfron LI, Kantor MM, Chastukhin AV, Zharkov SV (2021) Effect of microstructure on high-strength low-alloy steel welded joint toughness with simulation of heat affected zone coarse-grained area. Metallurgist 64:875–884. https://doi.org/10.1007/s11015-021-01067-310.1007/s11015-021-01067-3 ↗
96. Romanenko VP, Romantsev BA, Illarionov GP, Fomin AV, Zimin VYa, Stepanov PP, (2014) Billet preparation method for railcar hollow axle production. Metallurgist 58:684–688. https://doi.org/10.1007/s11015-014-9977-010.1007/s11015-014-9977-0 ↗
97. Liu C, Du Y, Zhu S, Wang X, Yang X, Yan G, Liu B, You C, Jiang B (2024) Fabrication of a dual-phase ductile iron with an exceptional combination of strength and toughness. Mater Lett 361:136072. https://doi.org/10.1016/j.matlet.2024.13607210.1016/j.matlet.2024.136072 ↗
98. Wang X, Wu Z, Zhang N, Wang C, Yuan G (2024) An improved toughness process for high-temperature hot-rolled HSLA steel via inclusion-induced acicular ferrite nucleation. Mater Lett 360:135969. https://doi.org/10.1016/j.matlet.2024.13596910.1016/j.matlet.2024.135969 ↗
99. Wang Y, Liu X, Fan S, Dong X, Wei Q, Zheng K, Xiang H (2024) Effect of heat treatment on microstructure and tensile property of 420 martensitic stainless steel produced by binder jetting additive manufacturing. Mater Lett 354:135429. https://doi.org/10.1016/j.matlet.2023.13542910.1016/j.matlet.2023.135429 ↗
100. Zhang Y, Yu C, Dong J, Su J, Luo Z (2024) Microstructure and mechanical properties of T-joints in mid-thick Q345 steel plates welded using deep penetration tungsten inert gas welding. Mater Lett 354:135401. https://doi.org/10.1016/j.matlet.2023.13540110.1016/j.matlet.2023.135401 ↗